SPECpower_ssj2008
Copyright © 2007-2016 Standard Performance Evaluation Corporation
| Hewlett Packard Enterprise ProLiant DL360 Gen9 | SPECpower_ssj2008 = 10,118 overall ssj_ops/watt | ||||
| Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
| Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Sep 8, 2015 |
| Hardware Availability: | Nov-2015 | Software Availability: | Jun-2013 | Publication: | Jan 7, 2016 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 100.0% | 3,159,419 | 276 | 11,429 |
| 90% | 90.2% | 2,851,258 | 248 | 11,485 |
| 80% | 79.9% | 2,525,861 | 218 | 11,598 |
| 70% | 70.0% | 2,212,076 | 188 | 11,771 |
| 60% | 60.0% | 1,894,880 | 162 | 11,725 |
| 50% | 50.0% | 1,579,461 | 145 | 10,870 |
| 40% | 40.1% | 1,266,259 | 133 | 9,545 |
| 30% | 30.1% | 949,976 | 118 | 8,043 |
| 20% | 19.9% | 629,838 | 101 | 6,213 |
| 10% | 10.0% | 315,004 | 83.7 | 3,765 |
| Active Idle | 0 | 45.0 | 0 | |
| ∑ssj_ops / ∑power = | 10,118 | |||
| Set Identifier: | SUT |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | SUT |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett Packard Enterprise |
| Model: | ProLiant DL360 Gen9 |
| Form Factor: | 1U |
| CPU Name: | Intel Xeon E5-2699 v3 2.30 GHz |
| CPU Characteristics: | 18-Core, 2.30 GHz, 45MB L3 Cache |
| CPU Frequency (MHz): | 2300 |
| CPU(s) Enabled: | 36 cores, 2 chips, 18 cores/chip |
| Hardware Threads: | 72 (2 / core) |
| CPU(s) Orderable: | 1,2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| Tertiary Cache: | 45 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 64 |
| # and size of DIMM: | 8 x 8182 MB |
| Memory Details: | 8 GB 2Rx8 PC4-2133P; slots 1, 4, 9 and 12 populated on each socket |
| Power Supply Quantity and Rating (W): | 1 x 800 |
| Power Supply Details: | HP 800W Flex Slot Titanium Hot Plug Power Supply Kit (720482-B21) |
| Disk Drive: | 1 x 400GB SSD SATA (691842-003) |
| Disk Controller: | embedded SATA |
| # and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 4-port 331i Adapter |
| NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | Microsoft Windows Server Enterprise 2008 R2 SP1 |
| OS Version: | Version 6.1 (Build 7601) |
| Filesystem: | NTFS |
| JVM Vendor: | IBM Corporation |
| JVM Version: | IBM J9 VM (build 2.6, JRE 1.7.0 Windows Server 2008 amd64-64 20120322_106209 (JIT enabled, AOT enabled) |
| JVM Command-line Options: | -Xmx975m -Xms975m -Xmn825m -Xaggressive -Xcompressedrefs -Xgcpolicy:gencon -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 -Xthr:minimizeusercpu -Xgc:preferredHeapBase=0x80000000 -Xgcthreads2 |
| JVM Affinity: | start /NODE [0,1,2,3] /AFFINITY [0x3, 0xc, 0x30, 0xc0, 0x300, 0xc00, 0x3000, 0xc000, 0x3000] |
| JVM Instances: | 36 |
| JVM Initial Heap (MB): | 975 |
| JVM Maximum Heap (MB): | 975 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | P89 1.50 07/20/2015 |
| Management Firmware Version: | 2.30 pass 22 Jun 25 2015 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | IBM WebSphere Application Server V8.5.0.0, Microsoft Hotfix for Windows (KB2510206) |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett-Packard Company |
| Model: | ProLiant DL360 G7 |
| CPU Description: | Intel Xeon X5670 |
| Memory amount (GB): | 64 |
| Software | |
|---|---|
| Operating System (OS): | Windows Server 2012 SP2 - V6.2 9200 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | 1.8.0_05-b13 (build 25.5-b02, mixed mode) |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa |
| Model: | WT210 |
| Serial Number: | 91GB3024 |
| Connectivity: | GPIB via NI GPIB-USB-HS |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | HP Metrology |
| Calibration Label: | 705419 |
| Date of Calibration: | 16-Jun-2015 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.7.1-4db18c59-20150211 |
| Setup Description: | SUT Power Supply 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 276 | 21.4 |
| 90% | 248 | 21.4 |
| 80% | 218 | 21.3 |
| 70% | 188 | 21.2 |
| 60% | 162 | 21.2 |
| 50% | 145 | 21.2 |
| 40% | 133 | 21.3 |
| 30% | 118 | 21.2 |
| 20% | 101 | 21.2 |
| 10% | 83.7 | 21.2 |
| Active Idle | 45.0 | 21.1 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 210V / 60 Hz / 1 phase / 2 wires | 21.1 | 132 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 2,971,239 | ||
| Calibration 2 | 3,155,191 | ||
| Calibration 3 | 3,165,493 | ||
| ssj_ops@calibrated=3,160,342 | |||
| 100% | 100.0% | 3,160,342 | 3,159,419 |
| 90% | 90.2% | 2,844,308 | 2,851,258 |
| 80% | 79.9% | 2,528,273 | 2,525,861 |
| 70% | 70.0% | 2,212,239 | 2,212,076 |
| 60% | 60.0% | 1,896,205 | 1,894,880 |
| 50% | 50.0% | 1,580,171 | 1,579,461 |
| 40% | 40.1% | 1,264,137 | 1,266,259 |
| 30% | 30.1% | 948,103 | 949,976 |
| 20% | 19.9% | 632,068 | 629,838 |
| 10% | 10.0% | 316,034 | 315,004 |
| Active Idle | 0 | 0 | |
