| Dell Inc. PowerEdge R770AP (Intel Xeon 6980P) | SPECpower_ssj2008 = 22,805 overall ssj_ops/watt | ||||
| Test Sponsor: | Dell Inc. | SPEC License #: | 6573 | Test Method: | Single Node |
| Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | Jan 11, 2026 |
| Hardware Availability: | Dec-2025 | Software Availability: | Dec-2025 | Publication: | Jan 27, 2026 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.8% | 31,355,659 | 1,185 | 26,457 |
| 90% | 90.0% | 28,281,993 | 1,114 | 25,396 |
| 80% | 80.0% | 25,133,769 | 888 | 28,296 |
| 70% | 70.0% | 22,006,300 | 812 | 27,118 |
| 60% | 60.0% | 18,867,675 | 738 | 25,571 |
| 50% | 50.0% | 15,708,551 | 664 | 23,666 |
| 40% | 40.0% | 12,560,584 | 588 | 21,364 |
| 30% | 30.0% | 9,437,727 | 516 | 18,281 |
| 20% | 20.0% | 6,295,701 | 450 | 13,989 |
| 10% | 10.0% | 3,135,646 | 381 | 8,232 |
| Active Idle | 0 | 241 | 0 | |
| ∑ssj_ops / ∑power = | 22,805 | |||
| Set Identifier: | sut |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | PowerEdge R770AP |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | PowerEdge R770AP (Intel Xeon 6980P) |
| Form Factor: | 2U |
| CPU Name: | Intel Xeon 6980P 2.0 GHz |
| CPU Characteristics: | 128 core, 2.0 GHz, 504 MB L3 Cache, Max Boost Clock up to 3.9 GHz |
| CPU Frequency (MHz): | 2000 |
| CPU(s) Enabled: | 256 cores, 2 chips, 256 cores/chip |
| Hardware Threads: | 512 (2 / core) |
| CPU(s) Orderable: | 1,2 chip |
| Primary Cache: | 64 KB I + 48 KB D on chip per core |
| Secondary Cache: | 2 MB I+D on chip per core |
| Tertiary Cache: | 504 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 768 |
| # and size of DIMM: | 24 x 32 GB |
| Memory Details: | 32 GB 2Rx4 PC5-6400-R running at 6400MHz Slots A1-12, B1-12 populated. |
| Power Supply Quantity and Rating (W): | 1 x 3200 |
| Power Supply Details: | 3200W Titanium Efficiency |
| Disk Drive: | 1 x 960 GB NVMe Gen4 |
| Disk Controller: | PCIe SSD Backplane |
| # and type of Network Interface Cards (NICs) Installed: | 1 x Intel(R) Eth Ntwk Adptr OCP 3.0 E610-IT4 |
| NICs Enabled in Firmware / OS / Connected: | 4/3/2 |
| Network Speed (Mbit): | 2500 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Balanced power plan in OS (see SUT notes) |
| Operating System (OS): | Microsoft Windows Server 2022 Datacenter |
| OS Version: | 21H2 (OS Build 20348.587) |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Java HotSpot(TM) 64-Bit Server VM (build 17.0.14+8-LTS-191, mixed mode, sharing) |
| JVM Command-line Options: | -server -Xms2048m -Xmx2048m -Xmn1900m -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=95 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=16 |
| JVM Affinity: | start /NODE [0-41] /AFFINITY [0x3,0xC,0x30,0xC0,0x300,0xC00] in addition [0,7,21,28] /AFFINITY [0x3000] |
| JVM Instances: | 256 |
| JVM Initial Heap (MB): | 2048 |
| JVM Maximum Heap (MB): | 2048 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | 1.1.6 |
| Management Firmware Version: | 10.20.80.50 A00 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc |
| Model: | PowerEdge R650xs |
| CPU Description: | 2 x Intel Xeon Gold 5315Y, 3.20 GHz |
| Memory amount (GB): | 512 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2022 Standard |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Java Development Kit 15.0.2 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
| Model: | WT310 |
| Serial Number: | T11733387 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | TesCom |
| Calibration Label: | T126625 |
| Date of Calibration: | 13-Aug-2025 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.11.3-a7835373-20251015 |
| Setup Description: | Connected to power supply |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.10.26.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 25 mm in front of SUT main airflow intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 1,185 | 21.1 |
| 90% | 1,114 | 21.2 |
| 80% | 888 | 21.1 |
| 70% | 812 | 21.1 |
| 60% | 738 | 21.1 |
| 50% | 664 | 21.1 |
| 40% | 588 | 21.1 |
| 30% | 516 | 21.1 |
| 20% | 450 | 21.1 |
| 10% | 381 | 21.1 |
| Active Idle | 241 | 21.0 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 21.0 | 255 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 31,871,663 | ||
| Calibration 2 | 31,408,326 | ||
| Calibration 3 | 31,437,126 | ||
| ssj_ops@calibrated=31,422,726 | |||
| 100% | 99.8% | 31,422,726 | 31,355,659 |
| 90% | 90.0% | 28,280,453 | 28,281,993 |
| 80% | 80.0% | 25,138,181 | 25,133,769 |
| 70% | 70.0% | 21,995,908 | 22,006,300 |
| 60% | 60.0% | 18,853,636 | 18,867,675 |
| 50% | 50.0% | 15,711,363 | 15,708,551 |
| 40% | 40.0% | 12,569,090 | 12,560,584 |
| 30% | 30.0% | 9,426,818 | 9,437,727 |
| 20% | 20.0% | 6,284,545 | 6,295,701 |
| 10% | 10.0% | 3,142,273 | 3,135,646 |
| Active Idle | 0 | 0 | |