| Dell Inc. PowerEdge XR8620T (Intel Xeon Gold 6433N, 2.00 GHz) | SPECpower_ssj2008 = 6,564 overall ssj_ops/watt | ||||
| Test Sponsor: | Dell Inc. | SPEC License #: | 6573 | Test Method: | Single Node |
| Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | Jul 15, 2024 |
| Hardware Availability: | Aug-2023 | Software Availability: | Jun-2024 | Publication: | Aug 13, 2024 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.7% | 4,333,105 | 420 | 10,307 |
| 90% | 89.9% | 3,907,339 | 416 | 9,404 |
| 80% | 80.2% | 3,483,845 | 400 | 8,719 |
| 70% | 70.0% | 3,043,057 | 385 | 7,902 |
| 60% | 60.0% | 2,606,564 | 372 | 7,014 |
| 50% | 50.0% | 2,172,414 | 340 | 6,395 |
| 40% | 40.0% | 1,737,902 | 301 | 5,773 |
| 30% | 29.9% | 1,299,751 | 273 | 4,759 |
| 20% | 20.1% | 872,613 | 260 | 3,358 |
| 10% | 10.0% | 435,175 | 244 | 1,786 |
| Active Idle | 0 | 230 | 0 | |
| ∑ssj_ops / ∑power = | 6,564 | |||
| Set Identifier: | sut |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | PowerEdge XR8620T |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | PowerEdge XR8620T (Intel Xeon Gold 6433N, 2.00 GHz) |
| Form Factor: | 2U |
| CPU Name: | Intel Xeon Gold 6433N |
| CPU Characteristics: | 32-Core, 2.0GHz, 60MB L3 Cache |
| CPU Frequency (MHz): | 2000 |
| CPU(s) Enabled: | 32 cores, 1 chip, 32 cores/chip |
| Hardware Threads: | 64 (2 / core) |
| CPU(s) Orderable: | 1 chips |
| Primary Cache: | 32 KB I + 48 KB D on chip per core |
| Secondary Cache: | 2 MB I+D on chip per core |
| Tertiary Cache: | 60 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 256 |
| # and size of DIMM: | 8 x 32 GB |
| Memory Details: | 32GB 2Rx8 PC5-4800B-UA0. Slots A1-8 populated. |
| Power Supply Quantity and Rating (W): | 1 x 1400 |
| Power Supply Details: | 1400W, Dell p/n K3RY3 |
| Disk Drive: | 2 x 1.92 TB NVME M.2 stick, Dell p/n 08M01 |
| Disk Controller: | BOSS controller card, Dell p/n DHFTR |
| # and type of Network Interface Cards (NICs) Installed: | Onboard 1 x Dual Port Intel E810 |
| NICs Enabled in Firmware / OS / Connected: | 1/1/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | SUSE Linux Enterprise Server 15 SP6 |
| OS Version: | 6.4.0-150600.21-default |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Java HotSpot(TM) 64-Bit Server VM(build 17.0.11+7-LTS-207, mixed mode) |
| JVM Command-line Options: | -server -Xms1950m -Xmx1950m -Xmn1700m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:UseAVX=0 -XX:-UseAdaptiveSizePolicy -XX:-ThreadLocalHandshakes |
| JVM Affinity: | for each physicalCore { numactl -C physicalCoreId, logicalCoreId + 1 } |
| JVM Instances: | 32 |
| JVM Initial Heap (MB): | 1950 |
| JVM Maximum Heap (MB): | 1950 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | 2.0.0 |
| Management Firmware Version: | 7.00.60.00 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | N/A |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc |
| Model: | PowerEdge R410 |
| CPU Description: | Intel Xeon E5620, 2.40 GHz |
| Memory amount (GB): | 32.0 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Hotspot(TM) Client VM, version 1.8.0_121 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
| Model: | WT210 |
| Serial Number: | 91K308530 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | TesCom |
| Calibration Label: | T75067 |
| Date of Calibration: | 16-Oct-2023 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.11.0-a4047d62-20231205 |
| Setup Description: | Connected to power supply |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.10.26.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 25 mm in front of SUT main airflow intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 420 | 25.8 |
| 90% | 416 | 25.8 |
| 80% | 400 | 25.8 |
| 70% | 385 | 25.8 |
| 60% | 372 | 25.8 |
| 50% | 340 | 25.8 |
| 40% | 301 | 25.7 |
| 30% | 273 | 25.6 |
| 20% | 260 | 25.6 |
| 10% | 244 | 25.6 |
| Active Idle | 230 | 25.6 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 25.6 | 255 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 4,424,613 | ||
| Calibration 2 | 4,347,931 | ||
| Calibration 3 | 4,341,124 | ||
| ssj_ops@calibrated=4,344,527 | |||
| 100% | 99.7% | 4,344,527 | 4,333,105 |
| 90% | 89.9% | 3,910,074 | 3,907,339 |
| 80% | 80.2% | 3,475,622 | 3,483,845 |
| 70% | 70.0% | 3,041,169 | 3,043,057 |
| 60% | 60.0% | 2,606,716 | 2,606,564 |
| 50% | 50.0% | 2,172,264 | 2,172,414 |
| 40% | 40.0% | 1,737,811 | 1,737,902 |
| 30% | 29.9% | 1,303,358 | 1,299,751 |
| 20% | 20.1% | 868,905 | 872,613 |
| 10% | 10.0% | 434,453 | 435,175 |
| Active Idle | 0 | 0 | |