Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-754.el6.x86_64 (mockbuild@x86-033.build.eng.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-23) (GCC) ) #1 SMP Thu May 24 18:18:25 EDT 2018
Command line: ro root=UUID=7d203dcf-991d-4218-a7c4-2a23bd9e6d0a rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us    selinux=0 audit=0 elevator=deadline crashkernel=auto
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffdc000 (usable)
 BIOS-e820: 000000003ffdc000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
SMBIOS version 2.8 @ 0xF58F0
SMBIOS 2.8 present.
DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014
Hypervisor detected: KVM
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3ffdc max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000003ffdc000
 0000000000 - 003fe00000 page 2M
 003fe00000 - 003ffdc000 page 4k
kernel direct mapping tables up to 3ffdc000 @ 8000-b000
RAMDISK: 36a91000 - 37fef484
ACPI: Deleted _OSI(Windows 2012)
ACPI: Deleted _OSI(Windows 2013)
ACPI: RSDP 00000000000f58c0 00014 (v00 BOCHS )
ACPI: RSDT 000000003ffe150e 00030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 000000003ffe13ea 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 000000003ffe0040 013AA (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 000000003ffe0000 00040
ACPI: APIC 000000003ffe145e 00078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 000000003ffe14d6 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-000000003ffdc000
Bootmem setup node 0 0000000000000000-000000003ffdc000
  NODE_DATA [0000000000009000 - 000000000003cfff]
  bootmap [000000000003d000 -  0000000000044fff] pages 8
(7 early reservations) ==> bootmem [0000000000 - 003ffdc000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0002050a64]    TEXT DATA BSS ==> [0001000000 - 0002050a64]
  #3 [0036a91000 - 0037fef484]          RAMDISK ==> [0036a91000 - 0037fef484]
  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #5 [0002051000 - 00020510f1]              BRK ==> [0002051000 - 00020510f1]
  #6 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff8800000f5ab0] f5ab0
crashkernel=auto resulted in zero bytes of reserved memory.
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1c3db81, boot clock
 [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002600000-ffff8800033fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x0003ffdc
On node 0 totalpages: 262010
  DMA zone: 56 pages used for memmap
  DMA zone: 100 pages reserved
  DMA zone: 3842 pages, LIFO batch:0
  DMA32 zone: 3528 pages used for memmap
  DMA32 zone: 254484 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x608
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:beffc000)
Booting paravirtualized kernel on KVM
NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff880002200000 s104088 r8192 d22888 u2097152
pcpu-alloc: s104088 r8192 d22888 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0 
kvm-clock: cpu 0, msr 0:2218b81, primary cpu clock
kvm-stealtime: cpu 0, msr 2212d00
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258326
Policy zone: DMA32
Kernel command line: ro root=UUID=7d203dcf-991d-4218-a7c4-2a23bd9e6d0a rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us    selinux=0 audit=0 elevator=deadline 
audit: disabled (until reboot)
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 994476k/1048432k available (5520k kernel code, 392k absent, 53564k reserved, 6909k data, 1340k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:256
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Detected 2245.960 MHz processor.
Calibrating delay loop (skipped) preset value.. 4491.92 BogoMIPS (lpj=2245960)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Disabled at boot.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 0000000000
mce: CPU supports 10 MCE banks
Speculative Store Bypass: Vulnerable
FEATURE SPEC_CTRL Not Present
FEATURE IBPB_SUPPORT Present
Spectre V2 : Mitigation: Full AMD retpoline
alternatives: switching to unfair spinlock
SMP alternatives: switching to UP code
Freeing SMP alternatives: 38k freed
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22051 entries in 87 pages
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD EPYC 7742 64-Core Processor                 stepping 00
APIC calibration not consistent with PM-Timer: 399ms instead of 100ms
APIC delta adjusted to PM-Timer: 6249993 (24999991)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog disabled (cpu0): hardware events not enabled
Brought up 1 CPUs
Total of 1 processors activated (4491.92 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
pci 0000:00:01.1: reg 20: [io  0xc060-0xc06f]
pci 0000:00:01.2: reg 20: [io  0xc040-0xc05f]
pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xfebf4000-0xfebf4fff]
pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
pci 0000:00:03.0: reg 10: [mem 0xfe000000-0xfe00ffff 64bit pref]
pci 0000:00:03.0: reg 1c: [mem 0xfe010000-0xfe013fff 64bit pref]
pci 0000:00:04.0: reg 10: [mem 0xfebf0000-0xfebf3fff]
pci 0000:00:06.0: reg 10: [io  0xc000-0xc03f]
pci 0000:00:06.0: reg 14: [mem 0xfebf5000-0xfebf5fff]
pci 0000:00:06.0: reg 20: [mem 0xfe014000-0xfe017fff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0070-0x0071]
pnp 00:01: [irq 8]
pnp 00:01: [io  0x0072-0x0077]
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [io  0x0060]
pnp 00:02: [io  0x0064]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: [io  0x03f2-0x03f5]
pnp 00:04: [io  0x03f7]
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [io  0xaf00-0xaf0b]
pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:06: [io  0xafe0-0xafe3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:07: [io  0xae00-0xae13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:01.2: PCI INT D disabled
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 21881k freed
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 256 (order: 2, 16384 bytes)
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1985
ksign: Installing public key data
Loading keyring
- Added public key 509B2AC861A75025
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
- Added public key CB445E0DA3EA1F65
- User ID: Red Hat Enterprise Linux Driver Update Program (key 4) <secalert@redhat.com>
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-754.el6.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2019-10-16 17:47:13 UTC (1571248033)
Initalizing network drop monitor service
Freeing unused kernel memory: 1340k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 604k freed
Freeing unused kernel memory: 1528k freed
dracut: dracut-004-411.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc060 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc068 irq 15
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:06.0: setting latency timer to 64
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
virtio-pci 0000:00:06.0: irq 24 for MSI/MSI-X
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
virtio-pci 0000:00:06.0: irq 25 for MSI/MSI-X
 vda: vda1 vda2 vda3
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: 
dracut: Remounting /dev/disk/by-uuid/7d203dcf-991d-4218-a7c4-2a23bd9e6d0a with -o barrier=0,noatime,ro
EXT4-fs (vda1): barriers disabled
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: 
dracut: Mounted root filesystem /dev/vda1
dracut: Switching root
Refined TSC clocksource calibration: 2245.964 MHz.
udev: starting version 147
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
i40evf: Intel(R) 40-10 Gigabit Virtual Function Network Driver - version 1.5.10-k
Copyright (c) 2013 - 2015 Intel Corporation.
i40evf 0000:00:03.0: setting latency timer to 64
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
i40evf 0000:00:03.0: irq 26 for MSI/MSI-X
  alloc irq_desc for 27 on node -1
  alloc kstat_irqs on node -1
i40evf 0000:00:03.0: irq 27 for MSI/MSI-X
i40evf 0000:00:03.0: Multiqueue Disabled: Queue pair count = 1
i40evf 0000:00:03.0: MAC address: 52:54:00:10:02:01
i40evf 0000:00:03.0: GRO is enabled
i40evf 0000:00:03.0: NIC Link is Up
snd_hda_intel 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
snd_hda_intel 0000:00:04.0: irq 28 for MSI/MSI-X
snd_hda_intel 0000:00:04.0: setting latency timer to 64
platform microcode: firmware: requesting amd-ucode/microcode_amd_fam17h.bin
sound hdaudioC0D0: autoconfig for ID 22: line_outs=1 (0x3/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Line=0x5
microcode: CPU0: patch_level=0x1000065
section size mismatch
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
EXT4-fs (vda3): barriers disabled
EXT4-fs (vda3): mounted filesystem with writeback data mode. Opts: 
