| Fujitsu FUJITSU Server PRIMERGY TX1330 M6 | SPECpower_ssj2008 = 11,182 overall ssj_ops/watt | ||||
| Test Sponsor: | Fujitsu | SPEC License #: | 19 | Test Method: | Single Node |
| Tested By: | Fujitsu | Test Location: | Kawasaki, Kanagawa, Japan | Test Date: | Mar 7, 2024 |
| Hardware Availability: | Apr-2024 | Software Availability: | Aug-2022 | Publication: | Apr 23, 2024 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.8% | 1,193,983 | 85.5 | 13,958 |
| 90% | 89.9% | 1,076,009 | 79.9 | 13,462 |
| 80% | 79.8% | 955,309 | 73.5 | 13,004 |
| 70% | 70.2% | 840,061 | 67.2 | 12,505 |
| 60% | 60.0% | 717,799 | 60.7 | 11,828 |
| 50% | 49.9% | 597,211 | 54.0 | 11,052 |
| 40% | 39.9% | 477,585 | 46.7 | 10,222 |
| 30% | 30.1% | 360,592 | 39.7 | 9,077 |
| 20% | 19.9% | 238,716 | 33.6 | 7,110 |
| 10% | 10.1% | 120,553 | 28.0 | 4,301 |
| Active Idle | 0 | 19.4 | 0 | |
| ∑ssj_ops / ∑power = | 11,182 | |||
| Set Identifier: | TX1330M6 |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | Single Node |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | FUJITSU Server PRIMERGY TX1330 M6 |
| Form Factor: | Tower |
| CPU Name: | Intel Xeon E-2488 |
| CPU Characteristics: | 8-Core, 3.20 GHz, 24 MB L3 Cache |
| CPU Frequency (MHz): | 3200 |
| CPU(s) Enabled: | 8 cores, 1 chip, 8 cores/chip |
| Hardware Threads: | 16 (2 / core) |
| CPU(s) Orderable: | 1 chip |
| Primary Cache: | 32 KB I + 48 KB D on chip per core |
| Secondary Cache: | 2 MB I+D on chip per core |
| Tertiary Cache: | 24 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 32 |
| # and size of DIMM: | 2 x 16384 MB |
| Memory Details: | 2 x 16 GB 1Rx8 PC5-4800B; slots 1A, 1B populated |
| Power Supply Quantity and Rating (W): | 1 x 450 |
| Power Supply Details: | Standard 450W Platinum PSU, S26113-E663-V50-1 |
| Disk Drive: | 1 x SSD M.2 240GB, PYBMF24YN5 |
| Disk Controller: | Integrated SATA Controller |
| # and type of Network Interface Cards (NICs) Installed: | 2 x RJ45 with integrated LEDs for fixed onboard 1Gb LAN |
| NICs Enabled in Firmware / OS / Connected: | 1/2/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Power saver |
| Operating System (OS): | Windows Server 2022 Standard |
| OS Version: | Version 21H2, OS build 20348.2113 |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.16.1+1-LTS, mixed mode) |
| JVM Command-line Options: | -server -Xmn11500m -Xms13000m -Xmx13000m -XX:+UseLargePages -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=2 -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:-UseAdaptiveSizePolicy -XX:+UseParallelOldGC -XX:FreqInlineSize=2500 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:-ThreadLocalHandshakes -XX:UseAVX=0 |
| JVM Affinity: | START /AFFINITY [0xffff] |
| JVM Instances: | 1 |
| JVM Initial Heap (MB): | 13000 |
| JVM Maximum Heap (MB): | 13000 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | R1.0.0 |
| Management Firmware Version: | 2.50f |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | KB5032198 |
Set the following options in BIOS.
Set the following options in OS.
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | PRIMERGY RX2530 M2 |
| CPU Description: | 2 x Intel Xeon E5-2643 v4 |
| Memory amount (GB): | 64 |
| Software | |
|---|---|
| Operating System (OS): | Windows Server 2019 Standard |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.211-b12, mixed mode), version 1.8.0_211 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Hioki |
| Model: | PW3336 |
| Serial Number: | 170121768 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | AIST (National Institute of Advanced Science and Technology) |
| Accredited by: | Kyosai Technos Co.,Ltd. |
| Calibration Label: | RY237000054 |
| Date of Calibration: | 05-Jul-2023 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.11.0-a4047d62-20231205 |
| Setup Description: | Connected to PSU 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | Watchport Virtual Port 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main air intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 85.5 | 23.8 |
| 90% | 79.9 | 23.7 |
| 80% | 73.5 | 23.7 |
| 70% | 67.2 | 23.7 |
| 60% | 60.7 | 23.8 |
| 50% | 54.0 | 23.8 |
| 40% | 46.7 | 23.9 |
| 30% | 39.7 | 24.0 |
| 20% | 33.6 | 24.0 |
| 10% | 28.0 | 24.0 |
| Active Idle | 19.4 | 24.0 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 200V / 50 Hz / 1 phase / 2 wires | 23.7 | 11 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 1,197,479 | ||
| Calibration 2 | 1,198,620 | ||
| Calibration 3 | 1,194,557 | ||
| ssj_ops@calibrated=1,196,588 | |||
| 100% | 99.8% | 1,196,588 | 1,193,983 |
| 90% | 89.9% | 1,076,930 | 1,076,009 |
| 80% | 79.8% | 957,271 | 955,309 |
| 70% | 70.2% | 837,612 | 840,061 |
| 60% | 60.0% | 717,953 | 717,799 |
| 50% | 49.9% | 598,294 | 597,211 |
| 40% | 39.9% | 478,635 | 477,585 |
| 30% | 30.1% | 358,977 | 360,592 |
| 20% | 19.9% | 239,318 | 238,716 |
| 10% | 10.1% | 119,659 | 120,553 |
| Active Idle | 0 | 0 | |