SPECpower_ssj2008 Copyright (C) 2007-2023 Standard Performance Evaluation Corporation Hewlett Packard Enterprise ProLiant DL345 Gen11 SPECpower_ssj2008 = 29,124 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: May 18, 2023 Publication: Jun 13, 2023 Hardware Availability: Jul-2023 Software Availability: Jul-2023 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.4% | 14,061,543 | 426 | 32,999 90% | 88.6% | 12,522,810 | 377 | 33,179 80% | 79.9% | 11,298,627 | 356 | 31,750 70% | 70.0% | 9,897,102 | 280 | 35,346 60% | 60.0% | 8,490,793 | 248 | 34,175 50% | 50.0% | 7,065,067 | 226 | 31,285 40% | 40.0% | 5,660,630 | 204 | 27,802 30% | 30.0% | 4,241,476 | 181 | 23,412 20% | 20.0% | 2,830,927 | 158 | 17,896 10% | 10.0% | 1,419,511 | 133 | 10,656 Active Idle | 0 | 70.7 | 0 sum of ssj_ops / sum of power = | 29,124 System Under Test Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 1 Comment: SUT HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL345 Gen11 Form Factor: 2U CPU Name: AMD EPYC 9754 2.25 GHz CPU Characteristics: 128-Core, 2.25 GHz, 256MB L3 Cache CPU Frequency (MHz): 2250 CPU(s) Enabled: 128 cores, 1 chip, 128 cores/chip Hardware Threads: 256 (2 / core) CPU(s) Orderable: 1 chip Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 256 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 192 # and size of DIMM: 12 x 16384 MB Memory Details: 16 GB 1Rx8 PC5-4800B-R; all slots populated Power Supply Quantity and Rating 1 x 1000 (W): Power Supply Details: HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit (P03178-B21) Disk Drive: 1 x HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSD (P40497-B21) Disk Controller: Embedded SATA Controller # and type of Network Interface 1 x HPE 1GbE 4p BASE-T I350-T4 OCP3 Adapter Cards (NICs) Installed: (P08449-B21) NICs Enabled in Firmware / OS / 4/4/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): SUSE Linux Enterprise Server 15 SP4 OS Version: 5.14.21-150400.22-default Filesystem: xfs JVM Vendor: Oracle Corporation JVM Version: Java HotSpot(TM) 64-Bit Server VM (build 17.0.2+8-LTS-86, mixed mode, sharing) JVM Command-line Options: -server -Xms1500m -Xmx1500m -Xmn1300m -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap JVM Affinity: for each even physicalCoreId { numactl -C physicalCoreId, physicalCoreId + 1, physicalCoreId + 256, physicalCoreId + 257 } JVM Instances: 64 JVM Initial Heap (MB): 1500 JVM Maximum Heap (MB): 1500 JVM Address Bits: 64 Boot Firmware Version: A56 v1.34 (04/06/2023) Management Firmware Version: 1.30 Feb 28 2023 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: HPE ProLiant Agentless Management Service for SUSE LINUX Enterprise Server 15 Boot Firmware Settings BIOS Platform Configuration (RBSU): * BIOS Serial Console Port: Disabled * Determinism Control: Manual * Performance Determinism : Performance Deterministic * Maximum Memory Bus Frequency: 4000 MHz * Memory Patrol Scrubbing : Disabled * DRAM Controller Power Down: Enabled * NUMA memory domains per socket: Four memory domains per socket * Last-Level Cache (LLC) As NUMA Node: Enabled * SR-IOV: Disabled * Data Fabric C-State Enable: Force Enabled * AMD Fmax Boost Limit Control: Manual * AMD Fmax Boost Limit: 2600 * Collaborative Power Control: Enabled * XGMI Force Link Width: x4 * XGMI Max Link Width: x4 * AMD xGMI Link Speed: 16 Gbps * NUMA Group Size Optimization: Clustered * L2 Stream HW Prefetcher: Disabled * Infinity Fabric Power Management: Disabled * Infinity Fabric Performance State: P3 * Maximum PCI Express Speed: PCIe Generation 1.0 * Ethernet Network Adapter -> PCIe Link Speed: PCIe Generation 1.0 * Ethernet Network Adapter -> PCIe Power Management(ASPM): L1 Enabled Management Firmware Settings See SUT Notes System Under Test Notes * Benchmark started via ssh * SPECpower_ssj.props input.load_level.number_warehouses set to 256 due to a known inconsistency in processor reporting with this Java version * OS tunes: * modprobe cpufreq_conservative * cpupower frequency-set -g conservative * echo 3000000 > /sys/devices/system/cpu/cpufreq/conservative/sampling_rate * echo 92 > /sys/devices/system/cpu/cpufreq/conservative/up_threshold * echo 1 > /sys/devices/system/cpu/cpufreq/conservative/freq_step * echo 91 > /sys/devices/system/cpu/cpufreq/conservative/down_threshold * echo always > /sys/kernel/mm/transparent_hugepage/enabled * echo 0 > /proc/sys/kernel/nmi_watchdog * echo 6000 > /proc/sys/kernel/sched_migration_cost_ns * echo 10000000 > /proc/sys/kernel/sched_min_granularity_ns * The system ROM used for this result contains AMD AGESA version 0x0AA00205h for the AMD EPYC 9754 processor Controller System HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen9 CPU Description: 2 X Intel Xeon E5-2660 v3 Memory amount (GB): 128 SOFTWARE Operating System (OS): Microsoft Windows Server 2019 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_91-b15 (build 25.91-b15, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GB47168 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-GT25H-40-1 Date of Calibration: 20-May-2022 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.10.0-82175bac-20220817 Setup Description: SUT Power Supplies 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 426 | 27.2 90% | 377 | 27.4 80% | 356 | 27.2 70% | 280 | 26.8 60% | 248 | 26.8 50% | 226 | 26.9 40% | 204 | 26.2 30% | 181 | 25.6 20% | 158 | 25.6 10% | 133 | 25.9 Active Idle | 70.7 | 26.4 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 25.6 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20230521-01255-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 13,515,546 Calibration 2 | | | 14,184,113 Calibration 3 | | | 14,097,794 ssj_ops@calibrated=14,140,954 100% | 99.4% | 14,140,954 | 14,061,543 90% | 88.6% | 12,726,858 | 12,522,810 80% | 79.9% | 11,312,763 | 11,298,627 70% | 70.0% | 9,898,667 | 9,897,102 60% | 60.0% | 8,484,572 | 8,490,793 50% | 50.0% | 7,070,477 | 7,065,067 40% | 40.0% | 5,656,381 | 5,660,630 30% | 30.0% | 4,242,286 | 4,241,476 20% | 20.0% | 2,828,191 | 2,830,927 10% | 10.0% | 1,414,095 | 1,419,511 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20230521-01255.DL345Gen11.txt) for additional details. Copyright (C) 2007-2023 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]