Hewlett Packard Enterprise ProLiant DL360 Gen10 | SPECpower_ssj2008 = 11,637 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Mar 11, 2019 |
Hardware Availability: | Apr-2019 | Software Availability: | Mar-2018 | Publication: | Apr 2, 2019 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.7% | 3,025,574 | 235 | 12,854 |
90% | 90.1% | 2,733,038 | 214 | 12,753 |
80% | 80.0% | 2,426,565 | 186 | 13,064 |
70% | 70.1% | 2,126,188 | 160 | 13,300 |
60% | 59.9% | 1,817,419 | 140 | 12,978 |
50% | 50.0% | 1,518,431 | 122 | 12,405 |
40% | 40.0% | 1,215,306 | 107 | 11,392 |
30% | 29.9% | 908,421 | 90.5 | 10,039 |
20% | 20.0% | 607,240 | 76.9 | 7,896 |
10% | 10.0% | 302,015 | 64.3 | 4,696 |
Active Idle | 0 | 37.3 | 0 | |
∑ssj_ops / ∑power = | 11,637 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen10 |
Form Factor: | 1U |
CPU Name: | Intel Xeon Platinum 8280 @ 2.70GHz |
CPU Characteristics: | 28-Core, 2.70 GHz, 38.5MB L3 Cache |
CPU Frequency (MHz): | 2700 |
CPU(s) Enabled: | 28 cores, 1 chip, 28 cores/chip |
Hardware Threads: | 56 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per core |
Tertiary Cache: | 39424 KB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 48 |
# and size of DIMM: | 6 x 8182 MB |
Memory Details: | 6 x 8GB 2Rx8 PC4-2666V-R; slots 1, 3, 5, 8, 10, and 12 populated in each socket |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply 96% (865438-B21) |
Disk Drive: | 1 x HPE 240GB SATA M.2 2280 SSD (875488-B21) |
Disk Controller: | Embedded SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 4-port 331i Adapter |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | SUSE Linux Enterprise Server 12 SP4 |
OS Version: | 4.12.14-94.41-default |
Filesystem: | XFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmn19g -Xms21g -Xmx21g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=384 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=37 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=28 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC |
JVM Affinity: | numactl --cpunodebind=[0-1] --localalloc |
JVM Instances: | 2 |
JVM Initial Heap (MB): | 21000 |
JVM Maximum Heap (MB): | 21000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U32 v2.00 (02/02/2019) |
Management Firmware Version: | 1.40 Feb 05 2019 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | HPE Service Pack for ProLiant (SPP) - Version 2019.03.0 (Mar 2019) |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2 x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2012 R2 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_161-b12 (build 25.161-b12, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT310 |
Serial Number: | C2SF14001V |
Connectivity: | Yokogawa-USB |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-EP5YB-20-1 |
Date of Calibration: | 08-Aug-2018 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.1-260d064e-20161220 |
Setup Description: | Connected to SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 235 | 21.7 |
90% | 214 | 21.7 |
80% | 186 | 21.6 |
70% | 160 | 21.6 |
60% | 140 | 21.6 |
50% | 122 | 21.5 |
40% | 107 | 21.5 |
30% | 90.5 | 21.5 |
20% | 76.9 | 21.5 |
10% | 64.3 | 21.5 |
Active Idle | 37.3 | 21.4 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
220V / 60 Hz / 1 phase / 2 wires | 21.4 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 3,034,819 | ||
Calibration 2 | 3,034,092 | ||
Calibration 3 | 3,035,111 | ||
ssj_ops@calibrated=3,034,601 | |||
100% | 99.7% | 3,034,601 | 3,025,574 |
90% | 90.1% | 2,731,141 | 2,733,038 |
80% | 80.0% | 2,427,681 | 2,426,565 |
70% | 70.1% | 2,124,221 | 2,126,188 |
60% | 59.9% | 1,820,761 | 1,817,419 |
50% | 50.0% | 1,517,301 | 1,518,431 |
40% | 40.0% | 1,213,840 | 1,215,306 |
30% | 29.9% | 910,380 | 908,421 |
20% | 20.0% | 606,920 | 607,240 |
10% | 10.0% | 303,460 | 302,015 |
Active Idle | 0 | 0 |