SPEC Seal of Reviewal CINT2000 Result
Copyright © 1999-2004 Standard Performance Evaluation Corporation
SGI
SGI 2200 2X 400MHz R12k
SPECint2000 = NC
SPECint_base2000 = NC
SPEC license # 4 Tested by: SGI Test date: Nov-1999 Hardware Avail: Mar-2000 Software Avail: May-1999
SPEC has determined that this result was not in compliance with the SPEC
CPU2000 run and reporting rules. Specifically, the result did not meet the
3 month availability requirement in the SPEC CPU2000 run rules due to a
change in availablility of the system.
Benchmark Reference
Time
Base
Runtime
Base
Ratio
Runtime Ratio Graph Scale
164.gzip 1400 NCNC NCNC  
175.vpr 1400 NCNC NCNC  
176.gcc 1100 NCNC NCNC  
181.mcf 1800 NCNC NCNC  
186.crafty 1000 NCNC NCNC  
197.parser 1800 NCNC NCNC  
252.eon 1300 NCNC NCNC  
253.perlbmk 1800 NCNC NCNC  
254.gap 1100 NCNC NCNC  
255.vortex 1900 NCNC NCNC  
256.bzip2 1500 NCNC NCNC  
300.twolf 3000 NCNC NCNC  
SPECint_base2000 NC  
  SPECint2000 NC  

Hardware
Hardware Vendor: SGI
Model Name: SGI 2200 2X 400MHz R12k
CPU: R12000
CPU MHz: 400
FPU: Integrated
CPU(s) enabled: 2 cores, 2 chips, 1 core/chip
CPU(s) orderable: 2
Parallel: No
Primary Cache: 32KBI + 32KBD on chip
Secondary Cache: 8MB(I+D) off chip
L3 Cache: N/A
Other Cache: N/A
Memory: 640MB
Disk Subsystem: 1 x 8.7GB SCSI
Other Hardware: None
Software
Operating System: IRIX 6.5.5m
Compiler: MIPSpro 7.3 C, C++, Fortran90
File System: xfs
System State: Single-user
Notes / Tuning Information
Baseline optimization flags (C and C++ use same flags):
   PASS1 : -Ofast=ip27 -IPA:use_intrinsic -fb_create /tmp/SPEC2000/FBDIR/base/$(EXEBASE)
   PASS2 : -Ofast=ip27 -IPA:use_intrinsic -fb_opt /tmp/SPEC2000/FBDIR/base/$(EXEBASE)
Portability Flags:
   176.gcc: -DUSG  -Dalloca=__builtin_alloca -DMIPS -DHOST_WORDS_BIG_ENDIAN
   186.crafty: -DSGI
   253.perlbmk: -DSPEC_CPU2000_SGI -DI_FCNTL
   254.gap: -DSYS_IS_USG -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO -DSYS_HAS_IOCTL_PROTO
   300.twolf: -DHAVE_SIGNED_CHAR
Peak optimization flags:
note:  all occurances of (FEEDBACK) below means compiled with a two-step process:
   PASS1 = -fb_create /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
   PASS2 = -fb_opt /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
 164.gzip: -Ofast=ip27 -IPA:space=500:plimit=500 (FEEDBACK)
 175.vpr: -Ofast=ip27 -IPA:space=300:plimit=10000:callee_limit=5000:linear=on -LNO:prefetch_ahead=2 
 .        -INLINE:aggressive=on -OPT:Olimit=0:alias=disjoint:alias=restrict (FEEDBACK)
 181.mcf: -Ofast=ip27 -IPA:min_hot=14 (FEEDBACK)
 176.gcc: -Ofast=ip27 (FEEDBACK)
 186.crafty: -Ofast=ip27 -LNO:prefetch=0 -OPT:goto=off (FEEDBACK)
 197.parser: -Ofast=ip27 -IPA:min_hot=14 (FEEDBACK)
 252.eon: -Ofast=ip27 -LNO:prefetch=0 -LANG:exceptions=off  (FEEDBACK)
 253.perlbmk: -Ofast=ip27 -IPA:use_intrinsic -Wl,-x (FEEDBACK)
 254.gap: -Ofast=ip27 -IPA:use_intrinsic -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4 
 .        -OPT:alias=restrict:alias=disjoint -IPA:min_hot=7  (FEEDBACK)
 255.vortex: -Ofast=ip27 -IPA:use_intrinsic -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4 -LNO:opt=0 
.           -CG:ld_latency=5 -IPA:min_hot=14 -TENV:X=4 -IPA:space=500:plimit=3600 -OPT:goto=off (FEEDBACK)
 256.bzip2: -Ofast=ip27 -IPA:min_hot=5:space=500:plimit=2900 -INLINE:aggressive=on (FEEDBACK)
 300.twolf: -Ofast=ip27 -IPA:use_intrinsic (FEEDBACK)
The following O/S parameters were set:
  limit stacksize 500000
  setenv PAGESIZE_DATA 4096
  setenv PAGESIZE_TEXT 4096
  setenv PAGESIZE_STACK 4096
  systune -i ; percent_totalmem_4m_pages = 50 ; nlpages_4m = 64


For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2004 Standard Performance Evaluation Corporation

First published at SPEC.org on 30-Dec-1999

Generated on Mon Mar 28 16:02:52 2005 by SPEC CPU2000 HTML formatter v1.01