SPEC Seal of Reviewal OMPM2001 Result
Copyright © 1999-2008 Standard Performance Evaluation Corporation
IBM
IBM HS22 Blade servers (Intel Xeon X5570, 2.93 GHz)
SPECompMpeak2001 = 44792      
SPECompMbase2001 = 43657      
SPEC license # HPG3440A Tested by: Indiana University Test site: -- Test date: Apr-2009 Hardware Avail: Apr-2009 Software Avail: Jan-2009
Benchmark Reference
Time
Base
Runtime
Base
Ratio
Peak
Runtime
Peak
Ratio
Graph Scale
310.wupwise_m 6000 84.3  71175       83.1  72213       310.wupwise_m base result bar (71175)
310.wupwise_m peak result bar (72213)
312.swim_m 6000 160    37393       161    37347       312.swim_m base result bar (37393)
312.swim_m peak result bar (37347)
314.mgrid_m 7300 210    34777       208    35081       314.mgrid_m base result bar (34777)
314.mgrid_m peak result bar (35081)
316.applu_m 4000 126    31718       127    31416       316.applu_m base result bar (31718)
316.applu_m peak result bar (31416)
318.galgel_m 5100 117    43597       116    43825       318.galgel_m base result bar (43597)
318.galgel_m peak result bar (43825)
320.equake_m 2600 54.4  47832       50.1  51888       320.equake_m base result bar (47832)
320.equake_m peak result bar (51888)
324.apsi_m 3400 86.1  39508       85.9  39601       324.apsi_m base result bar (39508)
324.apsi_m peak result bar (39601)
326.gafort_m 8700 164    53144       169    51553       326.gafort_m base result bar (53144)
326.gafort_m peak result bar (51553)
328.fma3d_m 4600 150    30680       141    32707       328.fma3d_m base result bar (30680)
328.fma3d_m peak result bar (32707)
330.art_m 6400 64.7  98915       59.9  106797        330.art_m base result bar (98915)
330.art_m peak result bar (106797)
332.ammp_m 7000 249    28149       232    30210       332.ammp_m base result bar (28149)
332.ammp_m peak result bar (30210)
SPECompMbase2001 43657        
  SPECompMpeak2001 44792        

Hardware
Hardware Vendor: IBM
Model Name: IBM HS22 Blade servers (Intel Xeon X5570, 2.93 GHz)
CPU: Intel Xeon X5570
CPU MHz: 2934
FPU: Integrated
CPU(s) enabled: 8 cores, 2 chips, 4 cores/chip (HT on)
CPU(s) orderable: 1-2 chips
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 256 KB I+D on chip per core
L3 Cache: 8 MB I+D on chip per chip
Other Cache: None
Memory: 24 GB (6*4GB DDR3-1333 RDIMMs)
Disk Subsystem: Shared Memory filesystem 12 GB, tmpfs
Other Hardware: None
Software
OpenMP Threads: 16
Parallel: OpenMP
Operating System: RHEL5.3 (x86_64) 2.6.18-128.1.6.el5
Kernel 2.6.18-128.1.6.el5
Compiler: Intel C/C++ Compiler 11.0.074
Intel Fortran Compiler 11.0.074
File System: tmpfs
System State: Multi-user, run level 3
Notes / Tuning Information
    ulimit -s unlimited
     Removes limits on the maximum size of the automatically-
     extended stack region of the current process and each
     process it creates.
 Compiler flags for base level optimization
     COPTIMIZE : -O3 -xhost -ipo -no-prec-div -unroll-loops0 -openmp
     FOPTIMIZE : -O3 -xhost -ipo -no-prec-div -unroll-loops0 -openmp
     F77OPTIMIZE : -O3 -xhost -ipo -no-prec-div -unroll-loops0 -openmp
 Environment:
     KMP_AFFINITY=disabled
      controls the binding of OpenMP threads to the physical processing units
     KMP_SCHEDULE=static,balanced
      used to fine tune the load balancing of parallel loops that are 
      statically scheduled under OpenMP with no chunk size specification
     KMP_BLOCKTIME=infinite
      Sets the time, in milliseconds, that a thread should wait, 
      after completing the execution of a parallel region, before sleeping.
     KMP_LIBRARY=throughput
      Selects the OpenMP run-time library
     KMP_STACKSIZE=31m
      Sets the number of bytes to allocate for each parallel thread to use as 
      to use as its provate stack
     OMP_NESTED=TRUE
      Enables (TRUE) or  disables  (FALSE)  nested  parallelism.
     OMP_DYNAMIC=FALSE
      Enables (true) or disables (false) the dynamic adjustment of the number of threads. 
     OMP_NUM_THREADS=16
      Sets  the maximum number of threads to use for OpenMP* parallel
      regions if no other value is specified in the  program  itself.
 Hyperthreading and turbo mode enabled.
 318.galgel_m portability flags:
     FFLAGS=-fixed -extend-source 132
 Flags for peak level optimization
 310.wupwise_m peak flags:
     fdo_pre0       = rm -rf ./*.dyn
     PASS1_FFLAGS   = -prof-gen
     PASS2_FFLAGS   = -prof-use
     PASS1_LDFLAGS  = -prof-gen
     PASS2_LDFLAGS  = -prof-use
 312.swim_m peak flags:
     fdo_pre0       = rm -rf ./*.dyn
     PASS1_FFLAGS   = -prof-gen
     PASS2_FFLAGS   = -prof-use
     PASS1_LDFLAGS  = -prof-gen
     PASS2_LDFLAGS  = -prof-use
 316.applu_m peak flags:
     COPTIMIZE = -O2 -xhost -ipo -no-prec-div -openmp
     FOPTIMIZE = -O2 -xhost -ipo -no-prec-div -openmp
     F77OPTIMIZE = -O2 -xhost -ipo -no-prec-div -openmp
 318.galgel_m peak flags:
     ENV_OMP_NUM_THREADS=8
 320.equake_m peak flags:
     ENV_OMP_NUM_THREADS=8
     srcalt:ompl.32
 324.apsi_m peak flags:
     COPTIMIZE = -O2 -xhost -ipo -no-prec-div -openmp
     FOPTIMIZE = -O2 -xhost -ipo -no-prec-div -openmp
     F77OPTIMIZE = -O2 -xhost -ipo -no-prec-div -openmp
 328.fma3d_m peak flags:
     srcalt:ompl.32
     fdo_pre0       = rm -rf ./*.dyn
     PASS1_FFLAGS   = -prof-gen
     PASS2_FFLAGS   = -prof-use
     PASS1_LDFLAGS  = -prof-gen
     PASS2_LDFLAGS  = -prof-use
 330.art_mpeak flags:
     COPTIMIZE = -O2 -xhost -ipo -no-prec-div -openmp
     FOPTIMIZE = -O2 -xhost -ipo -no-prec-div -openmp
     F77OPTIMIZE = -O2 -xhost -ipo -no-prec-div -openmp
 332.ammp_m peak flags:
     COPTIMIZE = -O2 -xhost -openmp
     FOPTIMIZE = -O2 -xhost -openmp
     F77OPTIMIZE = -O2 -xhost -openmp
 For a description of the flags used, please see
 Indiana-ic11.0-intel64-linux-flags-file-20090428.html in the flags directory



For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2008 Standard Performance Evaluation Corporation

First published at SPEC.org on 20-May-2009

Generated on Wed May 20 18:12:06 2009 by SPEC OMP2001 HTML formatter v1.01