| MPI2007 license: | 0018 | Test date: | Jul-2009 |
|---|---|---|---|
| Test sponsor: | QLogic Corporation | Hardware Availability: | Sep-2009 |
| Tested by: | QLogic Corporation | Software Availability: | Sep-2009 |
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ranks | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Ranks | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 104.milc | 256 | 28.9 | 54.2 | 28.9 | 54.2 | 28.8 | 54.4 | |||||||
| 107.leslie3d | 256 | 108 | 48.5 | 108 | 48.5 | 108 | 48.5 | |||||||
| 113.GemsFDTD | 256 | 298 | 21.2 | 298 | 21.1 | 298 | 21.2 | |||||||
| 115.fds4 | 256 | 89.2 | 21.9 | 42.2 | 46.3 | 42.0 | 46.5 | |||||||
| 121.pop2 | 256 | 149 | 27.7 | 148 | 27.8 | 149 | 27.8 | |||||||
| 122.tachyon | 256 | 91.4 | 30.6 | 91.4 | 30.6 | 91.4 | 30.6 | |||||||
| 126.lammps | 256 | 136 | 21.5 | 136 | 21.5 | 136 | 21.4 | |||||||
| 127.wrf2 | 256 | 106 | 73.4 | 106 | 73.5 | 105 | 74.0 | |||||||
| 128.GAPgeofem | 256 | 37.9 | 54.4 | 37.9 | 54.5 | 38.2 | 54.0 | |||||||
| 129.tera_tf | 256 | 84.7 | 32.7 | 84.7 | 32.7 | 84.7 | 32.7 | |||||||
| 130.socorro | 256 | 76.2 | 50.1 | 75.8 | 50.4 | 75.3 | 50.7 | |||||||
| 132.zeusmp2 | 256 | 59.4 | 52.3 | 59.5 | 52.2 | 59.4 | 52.2 | |||||||
| 137.lu | 256 | 58.0 | 63.3 | 58.0 | 63.4 | 58.0 | 63.4 | |||||||
| Hardware Summary | |
|---|---|
| Type of System: | Homogeneous |
| Compute Node: | Nehalem Compute Node |
| Interconnect: | TrueScale InfiniBand |
| File Server Node: | FusionSA |
| Total Compute Nodes: | 32 |
| Total Chips: | 64 |
| Total Cores: | 256 |
| Total Threads: | 256 |
| Total Memory: | 768 GB |
| Base Ranks Run: | 256 |
| Minimum Peak Ranks: | -- |
| Maximum Peak Ranks: | -- |
| Software Summary | |
|---|---|
| C Compiler: | Intel C++ Compiler 11.1 for Linux, Build 20090511 |
| C++ Compiler: | Intel C++ Compiler 11.1 for Linux, Build 20090511 |
| Fortran Compiler: | Intel Fortran Compiler 11.1 for Linux, Build 20090511 |
| Base Pointers: | 64-bit |
| Peak Pointers: | 64-bit |
| MPI Library: | QLogic MPI 2.5 |
| Other MPI Info: | None |
| Pre-processors: | No |
| Other Software: | None |
| Hardware | |
|---|---|
| Number of nodes: | 32 |
| Uses of the node: | compute |
| Vendor: | Supermicro |
| Model: | X8DTi-P motherboard, CSE-815TQ-700CB chassis |
| CPU Name: | Intel Xeon X5570 |
| CPU(s) orderable: | 1-2 chips |
| Chips enabled: | 2 |
| Cores enabled: | 8 |
| Cores per chip: | 4 |
| Threads per core: | 1 |
| CPU Characteristics: | Intel Turbo Boost Technology up to 3.33 GHz, 6.4 GT/s QPI, Hyper-Threading disabled |
| CPU MHz: | 2930 |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| L3 Cache: | 8 MB I+D on chip per chip, 8 MB shared / 4 cores |
| Other Cache: | None |
| Memory: | 24 GB (RDIMM 6x4-GB, DDR3-1333 MHz) |
| Disk Subsystem: | Seagate 500 GB ST3500320NS |
| Other Hardware: | None |
| Adapter: | QLogic QLE7342 |
| Number of Adapters: | 1 |
| Slot Type: | PCIe x8 Gen2 |
| Data Rate: | InfiniBand 4x QDR |
| Ports Used: | 1 |
| Interconnect Type: | InfiniBand |
| Software | |
|---|---|
| Adapter: | QLogic QLE7342 |
| Adapter Driver: | QLogic OFED 1.4.1 |
| Adapter Firmware: | none |
| Operating System: | Red Hat EL 5.3, kernel 2.6.18-128 |
| Local File System: | Linux/ext2 |
| Shared File System: | NFSv3 IPoIB |
| System State: | Multi-User |
| Other Software: | none |
| Hardware | |
|---|---|
| Number of nodes: | 1 |
| Uses of the node: | fileserver |
| Vendor: | Western Scientific |
| Model: | FusionSA (storage appliance) with Tyan Thunder n6650W (S2915) motherboard and LSI Logic MegaRAID SAS 8408E RAID controller |
| CPU Name: | Opteron 2218 |
| CPU(s) orderable: | 1-2 chips |
| Chips enabled: | 2 |
| Cores enabled: | 4 |
| Cores per chip: | 2 |
| Threads per core: | 1 |
| CPU Characteristics: | -- |
| CPU MHz: | 2600 |
| Primary Cache: | 64 KB I + 64 KB D on chip per core |
| Secondary Cache: | 1 MB I+D on chip per chip |
| L3 Cache: | None |
| Other Cache: | None |
| Memory: | 16 GB (8 x 2 GB PC2-5300 ECC) |
| Disk Subsystem: | 8 x 73 GB SAS 3Gb/s 15K RPM |
| Other Hardware: | None |
| Adapter: | Mellanox MHGH28-XTC |
| Number of Adapters: | 1 |
| Slot Type: | PCIe x8 Gen1 |
| Data Rate: | InfiniBand 4x DDR |
| Ports Used: | 1 |
| Interconnect Type: | InfiniBand |
| Software | |
|---|---|
| Adapter: | Mellanox MHGH28-XTC |
| Adapter Driver: | OFED 1.3 |
| Adapter Firmware: | 2.3.0 |
| Operating System: | Red Hat EL 4.5, 2.6.9-55.ELsmp |
| Local File System: | None |
| Shared File System: | NFSv3 IPoIB |
| System State: | Multi-User |
| Other Software: | None |
| Hardware | |
|---|---|
| Vendor: | QLogic |
| Model: | QLogic 12000 Series |
| Switch Model: | QLogic 12800-40 |
| Number of Switches: | 1 |
| Number of Ports: | 72 |
| Data Rate: | InfiniBand 4x QDR |
| Firmware: | 5.0.3.0.3 |
| Topology: | Single switch |
| Primary Use: | MPI traffic, File System traffic |
The config file option 'submit' was used.
BIOS settings notes: Intel Hyper-Threading Technology (SMT): Disabled (default is Enabled) Intel Turbo Boost Technology (Turbo) : Enabled (default is Enabled) Switch notes: Enabled 4K IB MTUs and 2 Virtual Lanes with QLogic 12800-40 switch CLI parameter setting "ismChassisSetMtu 5 3"
| mpicc -cc=icc |
| 126.lammps: | mpicxx -CC=icpc |
| mpif90 -f90=ifort |
| mpicc -cc=icc mpif90 -f90=ifort |
| 121.pop2: | -DSPEC_MPI_CASE_FLAG |
| 127.wrf2: | -DSPEC_MPI_LINUX -DSPEC_MPI_CASE_FLAG |