This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 437 | 
|---|---|
| SPECfp_rate_base95 | 420 | 
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio | 
|---|---|---|---|---|---|---|
| 101.tomcatv | 1 | 47.6 | 699 | 1 | 47 | 704 | 
| 102.swim | 1 | 79.8 | 970 | 1 | 78 | 991 | 
| 103.su2cor | 1 | 49.5 | 255 | 1 | 49 | 255 | 
| 104.hydro2d | 1 | 100 | 216 | 1 | 99 | 218 | 
| 107.mgrid | 1 | 70.2 | 320 | 1 | 64 | 352 | 
| 110.applu | 1 | 66.0 | 300 | 1 | 64 | 309 | 
| 125.turb3d | 1 | 104 | 354 | 1 | 103 | 358 | 
| 141.apsi | 1 | 50.7 | 373 | 1 | 49 | 383 | 
| 145.fpppp | 1 | 134 | 646 | 1 | 110 | 785 | 
| 146.wave5 | 1 | 48.1 | 561 | 1 | 48 | 564 | 
| SPECfp_rate_base95 | 420 | |||||
| SPECfp_rate95 | 437 | |||||
Tester Information:
| SPEC License #: | 3 | 
|---|---|
| Tested By: | HP Fort Collins, CO | 
| Test Date: | Feb-99 | 
| Hardware Avail: | May-99 | 
| Software Avail: | May-99 | 
Hardware Information:
| Model Name: | HP 9000 Model C3000 | 
|---|---|
| CPU: | 400 MHz PA-RISC 8500 | 
| FPU: | Integrated | 
| Number of CPU(s): | 1 | 
| Primary Cache: | 512KBI+1MBD on-chip | 
| Secondary Cache: | None | 
| Other Cache: | None | 
| Memory: | 256MB | 
| Disk Subsystem: | 1-9GB LVD SCSI Disk | 
| Other Hardware: | None | 
Software Information:
| Operating System: | HP-UX B.10.20 | 
|---|---|
| Compiler: | HP FORTRAN B.10.20.07 B3907CA | 
| File System: | HP-UX LVM with HFS | 
| System State: | Multi-user | 
Notes:
Base Flags: all: +Oall +Odataprefetch -Wl,-a,archive Peak Flags: Linker: 145: -Wl,-a,archive; all others: 101: +O3 +Onolimit +Odataprefetch +Oaggressive 102: +Oall +Odataprefetch +Onovectorize +Onofltacc 103: +Oall +Odataprefetch 104: +Oall +Onovectorize +Onofltacc +Odataprefetch 107: +O3 +Onolimit +Onofltacc +Oinline_budget=1000000 110: +Oall +Onovectorize +Onofltacc +Odataprefetch 125: +Oall +Odataprefetch +Oagressive 141: +O3 +Onolimit +Oaggressive +Onofltacc 145: +O4 +Olibcalls +Onofltacc +Onolimit +Ovectorize 146: +Oall +Odataprefetch Note: The +I/+P indicates the use of profile based
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@spec.org Tue Jun 22 15:40:41 1999First published at SPEC.org on 22-Jun-1999