This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp95 | 34.4 | 
|---|---|
| SPECfp_base95 | 30.1 | 
| Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio | 
|---|---|---|---|---|---|
| 101.tomcatv | 3700 | 101 | 36.7 | 76 | 48.6 | 
| 102.swim | 8600 | 169 | 50.9 | 119 | 72.3 | 
| 103.su2cor | 1400 | 77.8 | 18.0 | 65 | 21.4 | 
| 104.hydro2d | 2400 | 98.5 | 24.4 | 89 | 26.9 | 
| 107.mgrid | 2500 | 72.3 | 34.6 | 65 | 38.2 | 
| 110.applu | 2200 | 124 | 17.8 | 123 | 17.9 | 
| 125.turb3d | 4100 | 178 | 23.0 | 149 | 27.6 | 
| 141.apsi | 2100 | 74.9 | 28.0 | 68 | 30.8 | 
| 145.fpppp | 9600 | 201 | 47.9 | 201 | 47.9 | 
| 146.wave5 | 3000 | 75.5 | 39.7 | 72 | 41.5 | 
| SPECfp_base95 | 30.1 | ||||
| SPECfp95 | 34.4 | ||||
Tester Information:
| SPEC License #: | 04 | 
|---|---|
| Tested By: | SGI | 
| Test Date: | Apr-99 | 
| Hardware Avail: | Apr-99 | 
| Software Avail: | Apr-99 | 
Hardware Information:
| Model Name: | Origin2000: 2X 300MHz R12k | 
|---|---|
| CPU: | 300 MHz MIPS R12000 Processor Chip Revision: 2.3 | 
| FPU: | Integrated | 
| Number of CPU(s): | 2 (1 used) | 
| Primary Cache: | 32KBI + 32KBD on chip | 
| Secondary Cache: | 8MB (I+D) | 
| Other Cache: | None | 
| Memory: | 1024MB | 
| Disk Subsystem: | 1 SCSI 2.1GB | 
| Other Hardware: | none | 
Software Information:
| Operating System: | IRIX64 6.5 | 
|---|---|
| Compiler: | MIPSpro Fortran 77 and 90 7.3 | 
| IRIX Development Foundation 1.2 | |
| File System: | XFS | 
| System State: | Multi-User | 
Notes:
Base Flags: f77 -Ofast=ip27 -LNO:fusion=2 FEEDBACK FEEDBACK: . PASS1 = -fb_create /tmp/FBDIR/$(EXENAME) . PASS2 = -fb_opt /tmp/FBDIR/$(EXENAME) Peak Flags: tomcatv: f90 -Ofast=ip27 -LNO:prefetch_ahead=1:blocking=off:ou_max=2:local_pad_size=1 swim: f77 -Ofast=ip27 -LNO:fusion=2:prefetch_ahead=1 -IPA:inline=off:pad=off -OPT:ieee_arith=3:ro=3 -bigp_off su2cor: f90 -O3 -n32 -mips4 -TARG:platform=ip27 -TENV:X=3 -LNO:prefetch=0:fusion=2:local_pad_size=0 \ . -OPT:ro=3:ieee_ar=3:unroll_times_max=2:unroll_size=0:unroll_analysis=off hydro2d: f77 -Ofast=ip27 -TENV:X=4 -OPT:ro=3:ieee_arith=3 -LNO:prefetch=2:fusion=2:blocking=off \ . -IPA:maxdepth=1 -bigp_off mgrid: f77 -Ofast=ip27 -LNO:fusion=2:prefetch=2:prefetch_ahead=1:blocking=off -bigp_off applu f77 -Ofast=ip27 -LNO:fusion=2:ou_max=5:ou_prod_max=10 turb3d f77 -Ofast=ip27 -OPT:ieee_arith=3 -IPA:multi_clone=12:node_bloat=200 -LNO:prefetch=0 apsi f77 -Ofast=ip27 -OPT:div_split -LNO:fusion=2:prefetch=0:blocking=off -bigp_off fpppp: f77 -Ofast=ip27 -LNO:fusion=2 FEEDBACK wave5: f77 -Ofast=ip27 -LNO:fusion=2 -IPA:common_pad_size=13:maxdepth=2 -OPT:unroll_size=400 -bigp_off . Large pages were enabled for base and peak using: . systune -i ; percent_totalmem_1m_pages = 50 ; nlpages_1m = 200 . setenv PAGESIZE_DATA 1024
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@spec.org Tue Jun 15 11:30:36 1999First published at SPEC.org on 08-Jun-1999