This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 1611 | 
|---|---|
| SPECfp_rate_base95 | 1427 | 
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio | 
|---|---|---|---|---|---|---|
| 101.tomcatv | 8 | 149 | 1782 | 8 | 143 | 1858 | 
| 102.swim | 8 | 267 | 2316 | 8 | 243 | 2550 | 
| 103.su2cor | 8 | 97.8 | 1031 | 8 | 97 | 1042 | 
| 104.hydro2d | 8 | 178 | 969 | 8 | 171 | 1013 | 
| 107.mgrid | 8 | 123 | 1463 | 8 | 123 | 1463 | 
| 110.applu | 8 | 219 | 723 | 8 | 158 | 1002 | 
| 125.turb3d | 8 | 226 | 1306 | 8 | 215 | 1370 | 
| 141.apsi | 8 | 75.8 | 1995 | 8 | 75 | 2012 | 
| 145.fpppp | 8 | 413 | 1672 | 8 | 256 | 2700 | 
| 146.wave5 | 8 | 117 | 1846 | 8 | 100 | 2157 | 
| SPECfp_rate_base95 | 1427 | |||||
| SPECfp_rate95 | 1611 | |||||
Tester Information:
| SPEC License #: | 6 | 
|---|---|
| Tested By: | Sun, Palo Alto | 
| Test Date: | Sep-98 | 
| Hardware Avail: | Dec-98 | 
| Software Avail: | Oct-98 | 
Hardware Information:
| Model Name: | Sun Enterprise 3500 | 
|---|---|
| CPU: | 400MHz UltraSPARC II | 
| FPU: | Integrated | 
| Number of CPU(s): | 8 | 
| Primary Cache: | 16KBI+16KBD on chip | 
| Secondary Cache: | 4096KB(I+D) off chip | 
| Other Cache: | None | 
| Memory: | 8192MB | 
| Disk Subsystem: | 2 x 9GB | 
| Other Hardware: | FastEthernet | 
Software Information:
| Operating System: | Solaris 2.7 | 
|---|---|
| Compiler: | Sun F77 5.0 | 
| File System: | UFS | 
| System State: | Multi-User | 
| Kernel Extensions: | 
Notes:
BCOPY =  -Qoption iropt -O4+bcopy
INV =    -Qoption iropt -O4+invccexp
FULTRA = -xarch=v8plusa -xchip=ultra
Baseline: -fast -xarch=v8plusa -fsimple=2 -xprefetch 
101.tomcatv: -fast ${FULTRA} -xpad=local:23 -xprefetch 
102.swim: -fast ${FULTRA} -xpad=common:15 -xprefetch -fsimple=2
103.su2cor: -fast ${FULTRA} -xvector -Qoption cg -Qms_pipe+nfll=5
103 cont: -fsimple=2 -xprefetch ${BCOPY} -lmvec 
104.hydro2d: -fast ${FULTRA} -xprefetch -Qoption iropt -O4+pde -fsimple=2 -xprofile=use 
107.mgrid: -fast ${FULTRA} -xprefetch -fsimple=2 ${BCOPY}
110.applu: -fast ${FULTRA} -fsimple=2
110.cont: -Qoption iropt -O4+ddint+scalarrep+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr
125.turb3d: -fast ${FULTRA} -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes
141.apsi: -fast ${FULTRA} -fsimple=2 -stackvar -Qoption iropt
141 cont: -Si36 ${INV} -Qoption iropt -O4+algassoc 
145.fpppp: -fast ${FULTRA} -xO5 -xsafe=mem -fsimple=2 
145 cont: -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1 -xprofile=use 
146.wave5: -fast ${FULTRA}  -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Config Version @(#)uds.cfg 1.0 98/09/03
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Mon Feb 22 10:35:47 1999First published at SPEC.org on 18-Feb-1999