This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 759 |
|---|---|
| SPECfp_rate_base95 | 683 |
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
|---|---|---|---|---|---|---|
| 101.tomcatv | 4 | 171 | 780 | 4 | 150 | 890 |
| 102.swim | 4 | 297 | 1041 | 4 | 245 | 1263 |
| 103.su2cor | 4 | 107 | 472 | 4 | 96 | 527 |
| 104.hydro2d | 4 | 236 | 365 | 4 | 181 | 478 |
| 107.mgrid | 4 | 134 | 674 | 4 | 119 | 757 |
| 110.applu | 4 | 182 | 434 | 4 | 183 | 433 |
| 125.turb3d | 4 | 268 | 551 | 4 | 251 | 588 |
| 141.apsi | 4 | 105 | 723 | 4 | 100 | 756 |
| 145.fpppp | 4 | 277 | 1248 | 4 | 259 | 1335 |
| 146.wave5 | 4 | 99.9 | 1081 | 4 | 94 | 1145 |
| SPECfp_rate_base95 | 683 | |||||
| SPECfp_rate95 | 759 | |||||
Tester Information:
| SPEC License #: | 04 |
|---|---|
| Tested By: | SGI |
| Test Date: | Dec-98 |
| Hardware Avail: | Mar-98 |
| Software Avail: | Jun-98 |
Hardware Information:
| Model Name: | Origin2000 4X250MHz R10000 |
|---|---|
| CPU: | 250 MHz MIPS R10000 Processor Chip Revision: 3.4 |
| FPU: | MIPS R10010 Floating Point Chip Revision: 0.0 |
| Number of CPU(s): | 4 |
| Primary Cache: | 32KBI + 32KBD on chip |
| Secondary Cache: | 4MB (I+D) |
| Other Cache: | None |
| Memory: | 1024MB |
| Disk Subsystem: | 4 SCSI 4.4GB (striped) |
| Other Hardware: | none |
Software Information:
| Operating System: | IRIX64 6.5.1m |
|---|---|
| Compiler: | MIPSpro Fortran 77 and 90 7.2.1 |
| IRIX Development Foundation 1.1 | |
| File System: | XFS |
| System State: | Multi-User |
Notes:
All benchmarks were built using f77 unless noted otherwise Base Flags: -Ofast=ip27 -LNO:fusion=2 Peak Flags: FEEDBACK: . PASS1 = -fb_create /tmp/FBDIR/$(EXENAME) . PASS2 = -fb_opt /tmp/FBDIR/$(EXENAME) tomcatv: f90 -O3 -n32 -mips4 -LNO:prefetch_ahead=1:blocking=off swim: -O3 -n32 -mips4 -LNO:fusion=2:prefetch_ahead=1 -OPT:ieee_arith=3:ro=3:cs2=1m su2cor: -n32 -mips4 -O3 -TENV:X=3 -OPT:ro=3:ieee_arith=3:unroll_times_max=2:unroll_size=0 \ . -OPT:unroll_analysis=off -LNO:prefetch=0:fusion=2 -TARG:platform=ip27 hydro2d: -Ofast=ip27 -n32 -mips4 -TENV:X=4 -OPT:ro=3:ieee_arith=3 -LNO:prefetch=2:fusion=2 -LNO:blocking=off mgrid: -Ofast=ip27 -n32 -mips4 -LNO:fusion=2:prefetch=2:prefetch_ahead=1 applu: -Ofast=ip27 -LNO:fusion=2 turb3d: -Ofast=ip27 -IPA:inline=off -OPT:ieee_arith=3 -LNO:pf2=0:interchange=off:cs2=1m \ . -OPT:unroll_times_max=2, FEEDBACK apsi: -O3 -n32 -mips4 -IPA -OPT:div_split -LNO:fusion=2:prefetch=0:interchange=off fpppp: -Ofast=ip27 -lfastm -LNO:fusion=2, FEEDBACK wave5: -Ofast -LNO:fusion=2:fission=2:prefetch=1:prefetch_ahead=1, FEEDBACK . Large pages were enabled for base and peak using: . systune -i ; percent_totalmem_1m_pages = 50 . setenv PAGESIZE_DATA 1m
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Tue Dec 22 12:42:29 1998First published at SPEC.org on 22-Dec-1998