This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp95 | 28.1 | 
|---|---|
| SPECfp_base95 | 26.0 | 
| Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio | 
|---|---|---|---|---|---|
| 101.tomcatv | 3700 | 107 | 34.6 | 108 | 34.1 | 
| 102.swim | 8600 | 267 | 32.2 | 161 | 53.4 | 
| 103.su2cor | 1400 | 89.1 | 15.7 | 92 | 15.3 | 
| 104.hydro2d | 2400 | 230 | 10.4 | 227 | 10.6 | 
| 107.mgrid | 2500 | 113 | 22.1 | 114 | 21.9 | 
| 110.applu | 2200 | 120 | 18.3 | 118 | 18.6 | 
| 125.turb3d | 4100 | 170 | 24.1 | 162 | 25.3 | 
| 141.apsi | 2100 | 76.0 | 27.6 | 75 | 28.1 | 
| 145.fpppp | 9600 | 147 | 65.5 | 122 | 78.8 | 
| 146.wave5 | 3000 | 68.5 | 43.8 | 67 | 44.8 | 
| SPECfp_base95 | 26.0 | ||||
| SPECfp95 | 28.1 | ||||
Tester Information:
| SPEC License #: | 3 | 
|---|---|
| Tested By: | HP Richardson, TX | 
| Test Date: | Oct-98 | 
| Hardware Avail: | Dec-98 | 
| Software Avail: | Dec-98 | 
Hardware Information:
| Model Name: | HP 9000 Model C360 | 
|---|---|
| CPU: | 367 MHz PA-RISC 8500 | 
| FPU: | Integrated | 
| Number of CPU(s): | 1 | 
| Primary Cache: | 512KBI+1MBD 4-way set associative, on-chip | 
| Secondary Cache: | None | 
| Other Cache: | None | 
| Memory: | 1.5GB | 
| Disk Subsystem: | Ultra Wide SCSI | 
| Other Hardware: | None | 
Software Information:
| Operating System: | HP-UX B.10.20 A 9000/785 two-user license | 
|---|---|
| Compiler: | HP-UX f77 970509 B.10.20.09 | 
| File System: | HP-UX HFS | 
| System State: | Multi-user | 
Notes:
Base Flags: All: +Oall +Odataprefetch Linker Flag: All: -Wl,-aarchive Peak Flags: 101: +O3 +Odataprefetch +Oloop_unroll +Onolimit +Oregionsched +Ovectorize 102: +O4 +Ocachepadcommon +Odataprefetch +Oloop_unroll 103: +O2 +Odataprefetch +Oaggressive +Onolimit 104: +Oall +Odataprefetch +Oloop_unroll +Owhole_program_mode 107: +O3 +Odataprefetch +Oinline_budget=1000000 +Oloop_unroll +Onofltacc +Onolimit 110: +O3 +Odataprefetch +Oloop_unroll +Onofltacc 125: +O3 +Ocachepadcommon +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll 141: +Oall 145: +O4 +Oinline_budget=1000000 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +Ovectorize +I +P 146: +O3 +Odataprefetch +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl,-aarchive (!146) The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Tue Dec 22 12:42:24 1998First published at SPEC.org on 22-Dec-1998