SPECfp95

Sun Microsystems

Ultra 60 Model 1360

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
101.tomcatv	3700	117	31.6	105	35.4
102.swim	8600	193	44.7	176	48.9
103.su2cor	1400	93.9	14.9	82	17.0
104.hydro2d	2400	161	14.9	157	15.3
107.mgrid	2500	103	24.3	103	24.2
110.applu	2200	174	12.7	169	13.0
125.turb3d	4100	237	17.3	225	18.2
141.apsi	2100	80.9	26.0	75	28.1
145.fpppp	9600	421	22.8	382	25.2
146.wave5	3000	116	25.9	107	28.1
SPECfp_base95			21.9
		SPECfp95			23.5

Tester Information:

SPEC License #:	6
Tested By:	Sun, Palo Alto
Test Date:	Apr-98
Hardware Avail:	May-98
Software Avail:	Oct-98

Hardware Information:

Model Name:	Ultra 60 Model 1360
CPU:	360 MHz UltraSPARC-II
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	16KBI+16KBD on chip
Secondary Cache:	4MB(I+D) off chip
Other Cache:	None
Memory:	512MB
Disk Subsystem:	2 x 4.0GB
Other Hardware:	Fast Ethernet
	System clock frequency: 120 MHz

Software Information:

Operating System:	Solaris 2.6 Hardware 3/98
Compiler:	Sun f77 5.0 alpha
File System:	UFS
System State:	Single User
Kernel Extensions:	consistent_coloring=1

Notes:

P1= -xprofile=collect:`pwd`/../feedback
P2= -xprofile=use:`pwd`/../feedback
BCOPY=-Qoption iropt -O4+bcopy; INV=-Qoption iropt -O4+invccexp; BMR=-Qoption iropt -O4+bmerge
Baseline:    -fast -xarch=v8plusa -fsimple=2 -xprefetch
Peak:    -fast -xO4 -xarch=v8plusa -xchip=ultra
101.tomcatv: -fast -xarch=v8plusa -xpad=local:23 -xprefetch
102.swim:    -fast -xarch=v8plusa -xpad=common:15 -xprefetch -fsimple=2
103.su2cor:  -fast -xarch=v8plusa -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2  ${BCOPY}
103.su2cor:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
104.hydro2d: -fast -xarch=v8plusa -xprefetch -Qoption iropt -O4+pde -fsimple=2
104.hydro2d: PASS1= ${P1}; PASS2= ${P2}
107.mgrid:   -fast -xarch=v8plusa -xprefetch -fsimple=2 ${BCOPY}
107.mgrid:   PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
110.applu:   -fast -xarch=v8plusa -Qoption iropt -O4+scalarrep+ddint,-ldstr -fsimple=2
125.turb3d:  -fast -xarch=v8plusa -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes
125.turb3d:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
141.apsi:    -fast -xarch=v8plusa -fsimple=2 -stackvar  -Qoption iropt -Si36  ${INV} -Qoption iropt -O4+algassoc
141.apsi:    PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
145.fpppp:   -fast -xarch=v8plusa -xO5 -xsafe=mem -fsimple=2 -Qoption iropt -O4+algassoc -nodepend
145.fpppp:   PASS1= ${P1}; PASS2= ${P2}
146.wave5:   -fast -xarch=v8plusa  -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Shell limits: # ulimit -n 1024  or % limit descriptors 1024

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 26-May-1998