This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 1036 | 
|---|---|
| SPECfp_rate_base95 | 984 | 
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio | 
|---|---|---|---|---|---|---|
| 101.tomcatv | 6 | 150 | 1336 | 6 | 136 | 1466 | 
| 102.swim | 6 | 270 | 1721 | 6 | 243 | 1909 | 
| 103.su2cor | 6 | 112 | 675 | 6 | 111 | 680 | 
| 104.hydro2d | 6 | 189 | 684 | 6 | 184 | 705 | 
| 107.mgrid | 6 | 130 | 1038 | 6 | 129 | 1050 | 
| 110.applu | 6 | 233 | 510 | 6 | 226 | 526 | 
| 125.turb3d | 6 | 266 | 832 | 6 | 265 | 836 | 
| 141.apsi | 6 | 86.6 | 1310 | 6 | 82 | 1391 | 
| 145.fpppp | 6 | 438 | 1184 | 6 | 408 | 1270 | 
| 146.wave5 | 6 | 138 | 1173 | 6 | 124 | 1306 | 
| SPECfp_rate_base95 | 984 | |||||
| SPECfp_rate95 | 1036 | |||||
Tester Information:
| SPEC License #: | 6 | 
|---|---|
| Tested By: | Sun, Menlo Park | 
| Test Date: | Feb-98 | 
| Hardware Avail: | Mar-98 | 
| Software Avail: | Aug-98 | 
Hardware Information:
| Model Name: | Sun Enterprise 3000/6 | 
|---|---|
| CPU: | 336MHz UltraSPARC II | 
| FPU: | Integrated | 
| Number of CPU(s): | 6 | 
| Primary Cache: | 16KBI+16KBD on chip | 
| Secondary Cache: | 4MB(I+D) off chip | 
| Other Cache: | None | 
| Memory: | 4GB | 
| Disk Subsystem: | 4 x 4.2GB | 
| Other Hardware: | Fast Ethernet | 
Software Information:
| Operating System: | Solaris 2.6 | 
|---|---|
| Compiler: | Sun f77 5.0 | 
| File System: | UFS | 
| System State: | Multiuser | 
Notes:
STD =   -fast -xarch=v8plusa
INV =   -Qoption iropt -O4+invccexp
BCOPY = -Qoption iropt -O4+bcopy
Baseline:    ${STD} -fsimple=2 -xprefetch
101.tomcatv: ${STD} -xpad=local:23 -xprefetch
102.swim:    ${STD} -xpad=common:15 -xprefetch -fsimple=2
103.su2cor:  ${STD} -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2  ${BCOPY} -lmvec
104.hydro2d: ${STD} -xprefetch -Qoption iropt -O4+pde -fsimple=2 -xprofile=use
107.mgrid:   ${STD} -xprefetch -fsimple=2 ${BCOPY}
110.applu:   ${STD} -Qoption iropt -O4+ddint+scalarrep,-ldstr -fsimple=2
125.turb3d:  ${STD} -stackvar -xpad -fsimple=2 ${INV}
141.apsi:    ${STD} -fsimple=2 -stackvar  -Qoption iropt -Si36 ${INV} -Qoption iropt -O4+algassoc
145.fpppp:   ${STD} -xO5 -xsafe=mem -fsimple=2 -Qoption iropt -O4+algassoc -xprofile=use
146.wave5:   ${STD}  -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Wed Apr 29 15:13:54 PDT 1998First published at SPEC.org on 17-Mar-1998