This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp95 | 18.4 | 
|---|---|
| SPECfp_base95 | 17.1 | 
| Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio | 
|---|---|---|---|---|---|
| 101.tomcatv | 3700 | 146 | 25.4 | 129 | 28.6 | 
| 102.swim | 8600 | 242 | 35.5 | 216 | 39.8 | 
| 103.su2cor | 1400 | 126 | 11.1 | 112 | 12.5 | 
| 104.hydro2d | 2400 | 241 | 9.94 | 234 | 10.2 | 
| 107.mgrid | 2500 | 134 | 18.6 | 134 | 18.7 | 
| 110.applu | 2200 | 211 | 10.4 | 207 | 10.6 | 
| 125.turb3d | 4100 | 298 | 13.8 | 284 | 14.4 | 
| 141.apsi | 2100 | 104 | 20.2 | 97 | 21.6 | 
| 145.fpppp | 9600 | 500 | 19.2 | 463 | 20.8 | 
| 146.wave5 | 3000 | 141 | 21.3 | 128 | 23.5 | 
| SPECfp_base95 | 17.1 | ||||
| SPECfp95 | 18.4 | ||||
Tester Information:
| SPEC License #: | 6 | 
|---|---|
| Tested By: | Sun, Palo Alto | 
| Test Date: | Jan-98 | 
| Hardware Avail: | Mar-98 | 
| Software Avail: | May-98 | 
Hardware Information:
| Model Name: | Ultra 60 296MHz | 
|---|---|
| CPU: | 296MHz UltraSPARC-II | 
| FPU: | Integrated | 
| Number of CPU(s): | 1 | 
| Primary Cache: | 16KBI+16KBD on chip | 
| Secondary Cache: | 2.0MB(I+D) off chip | 
| Other Cache: | None | 
| Memory: | 512MB | 
| Disk Subsystem: | 2 x 4GB | 
| Other Hardware: | Fast Ethernet | 
| System clock frequency: 99 MHz | 
Software Information:
| Operating System: | Solaris 2.5.1 HW 1197 | 
|---|---|
| Compiler: | Sun f77 5.0 alpha | 
| File System: | UFS | 
| System State: | Single User | 
Notes:
BCOPY=-Qoption iropt -O4+bcopy; INV=-Qoption iropt -O4+invccexp; BMR=-Qoption iropt -O4+bmerge
Baseline:    -fast -xarch=v8plusa -fsimple=2 -xprefetch
101.tomcatv: -fast -xarch=v8plusa -xpad=local:23 -xprefetch
102.swim:    -fast -xarch=v8plusa -xpad=common:15 -xprefetch -fsimple=2
103.su2cor:  -fast -xarch=v8plusa -xvector -Qoption cg -Qms_pipe+nfll=5
103 cont:    -fsimple=2  ${BCOPY} -lmvec
104.hydro2d: -fast -xarch=v8plusa -xprefetch -Qoption iropt -O4+pde
104 cont:    -fsimple=2 -xprofile=use
107.mgrid:   -fast -xarch=v8plusa -xprefetch -fsimple=2 ${BCOPY}
110.applu:   -fast -xarch=v8plusa -Qoption iropt
110 cont:    -O4+ddint+scalarrep,-ldstr -fsimple=2
125.turb3d:  -fast -xarch=v8plusa -stackvar -xpad -fsimple=2
125 cont:    ${INV}
141.apsi:    -fast -xarch=v8plusa -fsimple=2 -stackvar  -Qoption iropt
141 cont:    -Si36 ${INV} -Qoption iropt -O4+algassoc
145.fpppp:   -fast -xarch=v8plusa -xO5 -xsafe=mem -fsimple=2
145 cont:    -Qoption iropt -O4+algassoc -xprofile=use
146.wave5:   -fast -xarch=v8plusa  -stackvar -fsimple=2 -Qoption iropt
146 cont:    -O4+unroll ${BCOPY}
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Tue Feb 17 12:57:28 PST 1998First published at SPEC.org on 17-Feb-1998