This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 248 |
|---|---|
| SPECfp_rate_base95 | 248 |
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
|---|---|---|---|---|---|---|
| 101.tomcatv | 4 | 435 | 306 | 4 | 435 | 306 |
| 102.swim | 4 | 648 | 478 | 4 | 648 | 478 |
| 103.su2cor | 4 | 330 | 153 | 4 | 330 | 153 |
| 104.hydro2d | 4 | 694 | 125 | 4 | 694 | 125 |
| 107.mgrid | 4 | 471 | 191 | 4 | 471 | 191 |
| 110.applu | 4 | 547 | 145 | 4 | 547 | 145 |
| 125.turb3d | 4 | 756 | 195 | 4 | 756 | 195 |
| 141.apsi | 4 | 272 | 278 | 4 | 272 | 278 |
| 145.fpppp | 4 | 788 | 439 | 4 | 788 | 439 |
| 146.wave5 | 4 | 226 | 477 | 4 | 226 | 477 |
| SPECfp_rate_base95 | 248 | |||||
| SPECfp_rate95 | 248 | |||||
Tester Information:
| SPEC License #: | 3 |
|---|---|
| Tested By: | HP Cupertino, CA |
| Test Date: | Oct-95 |
| Hardware Avail: | Jan-96 |
| Software Avail: | Aug-95 |
Hardware Information:
| Model Name: | HP 9000 Model K420 4-CPU |
|---|---|
| CPU: | 120 MHz PA-RISC 7200 |
| FPU: | Integrated |
| Number of CPU(s): | 4 |
| Primary Cache: | 1MBI+1MBD off-chip |
| Secondary Cache: | None |
| Other Cache: | None |
| Memory: | 512MB |
| Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
| Other Hardware: | Ethernet |
Software Information:
| Operating System: | HP-UX B.10.01 |
|---|---|
| Compiler: | FORTRAN B3906AA B.10.00.01.00 |
| File System: | HP-UX |
| System State: | Multi-user |
| Kernel Extensions: | Increased: maxdsiz, maxssiz |
Notes:
BASE: All: +Oall +Onofastaccess +DAK400 -Wl,-a,archive PEAK: Same as BASE.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Tue Feb 27 2:04:41 PST 1996First published at SPEC.org on 20-Feb-1996