SPEC Benchmark CINT95 Summary Base Base Base Peak Peak Peak Benchmarks Ref Time Run Time Ratio Ref Time Run Time Ratio ------------ -------- -------- -------- -------- -------- -------- 099.go 4600 1193 3.85 4600 1193 3.85 124.m88ksim 1900 588 3.23 1900 588 3.23 126.gcc 1700 506 3.36 1700 506 3.36 129.compress 1800 609 2.95 1800 609 2.95 130.li 1900 526 3.61 1900 526 3.61 132.ijpeg 2400 1064 2.26 2400 1064 2.26 134.perl 1900 495 3.84 1900 495 3.84 147.vortex 2700 750 3.60 2700 750 3.60 SPECint_base95 (Geom. Mean) 3.30 SPECint95 (Geom. Mean) 3.30 HARDWARE -------- Model Name: XXpress CPU: 100MHz Pentium Processor FPU: Integrated Number of CPU(s): 1 Primary Cache: 8KBI+8KBD Secondary Cache: 1MB(I+D) Other Cache: None Memory: 64MB (70ns fast page) Disk Subsystem: 2x973MB Seagate ST 31250W Other Hardware: AIC 7870 PCI (onboard) SOFTWARE -------- Operating System: UnixWare 2.0, SDK Compiler: Intel C Reference Compiler 2.2 Beta File System: ufs, vxfs (/tmp as 8MB /tmpfs) System State: Single user (root + killall) NOTES ------- Base and non-base flags are the same and use Feedback Directed Optimization Pass1: -tp p5 -ipo -prof_gen -ircdb_dir /tmp/IRCDB -dn Pass2: -tp p5 -ipo -prof_use -ircdb_dir /tmp/IRCDB -dn -ircdb_dir is a location flag and not an optimization flag Portability: 124: -DSYSV -DLEHOST 130, 134, 147: -lm 132: -DSYSV 126: -lm -lc -L/usr/ucblib -lucb -lmalloc Two processor module; 2nd processor disabled with UnixWare "psradm" command