Hewlett-Packard
HP 9000 Model J200 Multiprocessor
| SPECfp_rate_rate95
| 105
|
|---|
| SPECfp_rate_base_rate95
| 105
|
|---|
| Benchmark # and Name
| Base # Copies
| Base Run Time
| Base SPEC Ratio
| Peak # Copies
| Peak Run Time
| Peak SPEC Ratio
|
| 101.tomcatv | 2 | 363 | 184 | 2 | 363 | 184
|
| 102.swim | 2 | 542 | 286 | 2 | 542 | 286
|
| 103.su2cor | 2 | 566 | 44.5 | 2 | 566 | 44.5
|
| 104.hydro2d | 2 | 746 | 57.9 | 2 | 746 | 57.9
|
| 107.mgrid | 2 | 589 | 76.4 | 2 | 589 | 76.4
|
| 110.applu | 2 | 622 | 63.6 | 2 | 622 | 63.6
|
| 125.turb3d | 2 | 892 | 82.8 | 2 | 892 | 82.8
|
| 141.apsi | 2 | 398 | 94.9 | 2 | 398 | 94.9
|
| 145.fpppp | 2 | 959 | 180 | 2 | 959 | 180
|
| 146.wave5 | 2 | 311 | 174 | 2 | 311 | 174
|
| SPECfp_rate_base_rate95
| 105
|
|
|
| SPECfp_rate_rate95
| 105
|
Tester Information:
| SPEC License #:
| 3
|
|---|
| Tested By: | HP Cupertino, CA
|
|---|
| Test Date:
| Aug-95
|
|---|
| Hardware Avail:
| Aug-95
|
|---|
| Software Avail:
| Aug-95
|
|---|
Hardware Information:
| Model Name:
| J200 Multiprocessor
|
| CPU:
| 100 MHz PA-RISC 7200
|
| FPU:
| Integrated
|
| Number of CPU(s):
| 2
|
| Primary Cache:
| 256KI+256KD off-chip
|
| Secondary Cache:
| None
|
| Other Cache:
| None
|
| Memory:
| 256MB
|
| Disk Subsystem:
| 1 Fast/Wide SCSI-2 1.0 GB
|
| Other Hardware:
| Ethernet
|
Software Information:
| Operating System:
| HP-UX B.10.01
|
| Compiler:
| FORTRAN B3906AA B.10.00.01.00
|
| File System:
| HP-UX
|
| System State:
| Multi-user
|
Notes:
Linker Flags: -Wl,-aarchive
Baseline Flags: +Oall +Onofastaccess
If you wish to print this information we highly recommend using the
postscript reporting page.
This page was generated with runspec 95.55.
- For more information contact:
- SPEC
10754 Ambassador Drive, Suite 201
Manassas, VA, 22110