This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 3319 | 
|---|---|
| SPECfp_rate_base95 | 3060 | 
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio | 
|---|---|---|---|---|---|---|
| 101.tomcatv | 16 | 105 | 5082 | 16 | 106 | 5040 | 
| 102.swim | 16 | 183 | 6769 | 16 | 166 | 7456 | 
| 103.su2cor | 16 | 114 | 1764 | 16 | 113 | 1780 | 
| 104.hydro2d | 16 | 124 | 2790 | 16 | 120 | 2880 | 
| 107.mgrid | 16 | 115 | 3125 | 16 | 90 | 4022 | 
| 110.applu | 16 | 229 | 1386 | 16 | 227 | 1397 | 
| 125.turb3d | 16 | 246 | 2403 | 16 | 221 | 2668 | 
| 141.apsi | 16 | 120 | 2513 | 16 | 97 | 3104 | 
| 145.fpppp | 16 | 301 | 4597 | 16 | 274 | 5045 | 
| 146.wave5 | 16 | 122 | 3537 | 16 | 120 | 3590 | 
| SPECfp_rate_base95 | 3060 | |||||
| SPECfp_rate95 | 3319 | |||||
Tester Information:
| SPEC License #: | 19 | 
|---|---|
| Tested By: | Fujitsu Limited | 
| Test Date: | Mar-2000 | 
| Hardware Avail: | Jan-2000 | 
| Software Avail: | Jan-2000 | 
Hardware Information:
| Model Name: | GP7000F Model 1000 | 
|---|---|
| CPU: | 300MHz SPARC64 GP | 
| FPU: | Integrated | 
| Number of CPU(s): | 16 | 
| Primary Cache: | 64KBI+64KBD on chip, 4way | 
| Secondary Cache: | 8.0MB(I+D) off chip, per cpu | 
| Other Cache: | None | 
| Memory: | 16GB | 
| Disk Subsystem: | 1 x 9GB 10,000rpm | 
| 1 x GR700(20 x 9GB 10,000rpm) | |
| Other Hardware: | Ethernet | 
Software Information:
| Operating System: | Solaris 7 HW:8/99 | 
|---|---|
| Compiler: | Fujitsu Fortran V4.0.2 | 
| File System: | UFS | 
| System State: | Multi User | 
| Kernel Extensions: | set consistent_coloring=1 | 
Notes:
Baseline flags were: -Kfast,V8PFMADD,prefetch,gs
Nonbaseline: PEAKOPT = -X7 -Kfast,V8PFMADD,gs,prefetch  EXTRA_FFLAGS = -dn
101.tomcatv: ${PEAKOPT} -KGREG,eval
102.swim: ${PEAKOPT} -KGREG,preex -Koffset=140
103.su2cor: ${PEAKOPT}
104.hydro2d: ${PEAKOPT} -Keval
107.mgrid: ${PEAKOPT} -KGREG,commonpad,eval
110.applu: ${PEAKOPT} -KGREG
125.turb3d: ${PEAKOPT} -KGREG,commonpad,eval -Ksp=0 -x-
141.apsi: ${PEAKOPT} -KGREG,auto,preex,eval
145.fpppp: ${PEAKOPT} -Keval,nounroll,preex
146.wave5: ${PEAKOPT} -KGREG,auto,nofuse -x10
Shell limits: ulimit -n 1024; ulimit -s 81920;
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@spec.org Fri Apr 14 13:01:09 2000First published at SPEC.org on 11-Apr-2000