SPECfp95

Sun Microsystems

Sun Enterprise 450

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
101.tomcatv	3700	98.9	37.4	79	46.9
102.swim	8600	130	66.1	98	87.3
103.su2cor	1400	61.2	22.9	49	28.7
104.hydro2d	2400	95.2	25.2	88	27.3
107.mgrid	2500	64.2	39.0	45	55.9
110.applu	2200	145	15.2	139	15.8
125.turb3d	4100	247	16.6	210	19.5
141.apsi	2100	99.0	21.2	69	30.5
145.fpppp	9600	406	23.7	274	35.0
146.wave5	3000	108	27.7	97	30.8
SPECfp_base95			26.9
		SPECfp95			33.6

Tester Information:

SPEC License #:	6
Tested By:	Sun, Palo Alto
Test Date:	Jan-2000
Hardware Avail:	Nov-1998
Software Avail:	Aug-1999

Hardware Information:

Model Name:	Sun Enterprise 450
CPU:	400 MHz UltraSPARC-II
FPU:	Integrated
Number of CPU(s):	2
Primary Cache:	16KBI+16KBD on chip
Secondary Cache:	4MB(I+D) off chip
Other Cache:	None
Memory:	1024MB
Disk Subsystem:	2 x 9GB
Other Hardware:	Fast Ethernet
	System clock frequency: 100 MHz

Software Information:

Operating System:	Solaris 7 8/99 (32-bit)
Compiler:	Sun Workshop FORTRAN 77 5.0
File System:	UFS
System State:	Single User
Kernel Extensions:

Notes:

P1= -xprofile=collect:`pwd`/../feedback
P2= -xprofile=use:`pwd`/../feedback
BCOPY= -Qoption iropt -O4+bcopy; INV = -Qoption iropt -O4+invccexp; BMR = -Qoption iropt -O4+bmerge
Baseline: -fast -xarch=v8plusa -xparallel
Baseline: PASS1= ${P1}; PASS2= ${P2};
101.tomcatv: -fast -xarch=v8plusa -xpad -xprefetch -xparallel -xreduction
102.swim:    -fast -xarch=v8plusa -s -xpad=common:15 -xprefetch  -xparallel
103.su2cor:  -fast -xarch=v8plusa -s -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2  ${BCOPY}  -xparallel -xreduction
103.su2cor:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2};  EXTRA_LIBS= -lmvec
104.hydro2d: -fast -xarch=v8plusa -xprefetch -Qoption iropt -O4+pde -fsimple=2 -xparallel
104.hydro2d:  PASS1= ${P1}; PASS2= ${P2};
107.mgrid: -fast -xarch=v8plusa -fsimple=2 -xprefetch -xparallel
110.applu: -fast -xarch=v8plusa -Qoption iropt -O4+scalarrep+ddint+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr -fsimple=2
125.turb3d:  -fast -xarch=v8plusa -stackvar -xpad -fsimple=2 ${INV}
125.turb3d:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2};
141.apsi:    -fast -xarch=v8plusa -s -xchip=ultra2  -fsimple=2 -xvector -stackvar  -Qoption iropt -Si36  ${BMR} ${INV} 
141.apsi (cont):   -Qoption iropt -O4+algassoc
141.apsi:    PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2};
145.fpppp:   OPTIMIZE = -fast -xarch=v8plusa -xO5 -xsafe=mem -fsimple=2 -nodepend -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1
145.fpppp:   PASS1= ${P1}; PASS2= ${P2};
146.wave5:   -fast -xarch=v8plusa  -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Config file: e4502wayfpmp.cfg

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 15-Feb-2000