|
Lenovo Global Technology ThinkSystem SR655 |
SPECspeed®2017_int_base = 8.96 |
|
SPECspeed®2017_int_peak = 9.20 |
| CPU2017 License: | 9017 | Test Date: | Oct-2019 |
|---|---|---|---|
| Test Sponsor: | Lenovo Global Technology | Hardware Availability: | Aug-2019 |
| Tested by: | Lenovo Global Technology | Software Availability: | Aug-2019 |
Benchmark result graphs are available in the PDF report.
| Hardware | |
|---|---|
| CPU Name: | AMD EPYC 7742 |
| Max MHz: | 3400 |
| Nominal: | 2250 |
| Enabled: | 64 cores, 1 chip |
| Orderable: | 1 chip |
| Cache L1: | 32 KB I + 32 KB D on chip per core |
| L2: | 512 KB I+D on chip per core |
| L3: | 256 MB I+D on chip per chip, 16 MB shared / 4 cores |
| Other: | None |
| Memory: | 256 GB (8 x 32 GB 2Rx4 PC4-3200AA-R) |
| Storage: | 1 x 960 GB SATA SSD |
| Other: | None |
| Software | |
|---|---|
| OS: | Red Hat Enterprise Linux release 8.0 (Ootpa) Kernel 4.18.0-80.el8.x86_64 |
| Compiler: | C/C++/Fortran: Version 2.0.0 of AOCC |
| Parallel: | Yes |
| Firmware: | Lenovo BIOS Version CFE105D released Sep-2019 |
| File System: | xfs |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 64-bit |
| Peak Pointers: | 32/64-bit |
| Other: | jemalloc: jemalloc memory allocator library v5.1.0 |
| Power Management: | Enabled |
| Power | |
|---|---|
| Max. Power (W): | 327.62 |
| Idle Power (W): | 97.36 |
| Min. Temperature (C): | 20.44 |
| Elevation (m): | 43 |
| Line Standard: | 220 V / 50 Hz / 1 phase / 1 wire |
| Provisioning: | Line-powered |
| Power Settings | |
|---|---|
| Management FW: | Version 1.51 of AMBT05B |
| Memory Mode: | Normal |
| Power-Relevant Hardware | |
|---|---|
| Power Supply: | 1 x 750 W (non-redundant) |
| Details: | Lenovo 750W Platinum Hot-SWap Power Supply |
| Backplane: | hot-swap drive bays |
| Other Storage: | None |
| Storage Model #s: | MTFDDAK960TTDN |
| NICs Installed: | 1 x 4-port OCP Ethernet Adapter @ 1 Gb |
| NICs Enabled (FW/OS): | 4 / 1 |
| NICs Connected/Speed: | 1 @ 1 Gb |
| Other HW Model #s: | None |
| Power Analyzer | |
|---|---|
| Power Analyzer: | WIN:8888 |
| Hardware Vendor: | YOKOGAWA, Inc. |
| Model: | YokogawaWT310 |
| Serial Number: | C2RA21002V |
| Input Connection: | Default |
| Metrology Institute: | CNAS |
| Calibration By: | China CEPREI Laboratory |
| Calibration Label: | 1GA18013618-0009 |
| Calibration Date: | 29-Oct-2018 |
| PTDaemon™ Version: | 1.9.1 (a2d19f26; 2019-07-17) |
| Setup Description: | Connected to PSU1 |
| Current Ranges Used: | 2A |
| Voltage Range Used: | 300V |
| Temperature Meter | |
|---|---|
| Temperature Meter: | WIN:8889 |
| Hardware Vendor: | Digi Intermational, Inc. |
| Model: | DigiWATCHPORT_H |
| Serial Number: | COM1 |
| Input Connection: | USB |
| PTDaemon Version: | 1.9.1 (a2d19f26; 2019-07-17) |
| Setup Description: | 50 mm in front of SUT main intake |
| Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECspeed®2017_int_base | 8.96 | ||||||||||||||||||
| SPECspeed®2017_int_energy_base | 72.4 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 600.perlbench_s | 64 | 363 | 4.90 | 47.4 | 40.6 | 131 | 135 | 367 | 4.84 | 48.1 | 40.0 | 131 | 135 | 363 | 4.89 | 47.7 | 40.4 | 131 | 135 |
| 602.gcc_s | 64 | 404 | 9.86 | 54.3 | 79.7 | 135 | 146 | 407 | 9.79 | 54.8 | 79.0 | 135 | 147 | 406 | 9.80 | 54.8 | 79.0 | 135 | 146 |
| 605.mcf_s | 64 | 309 | 15.3 | 41.4 | 124 | 134 | 149 | 309 | 15.3 | 41.5 | 124 | 134 | 151 | 309 | 15.3 | 42.0 | 123 | 136 | 149 |
| 620.omnetpp_s | 64 | 319 | 5.11 | 42.4 | 41.8 | 133 | 134 | 322 | 5.07 | 42.7 | 41.5 | 133 | 133 | 320 | 5.10 | 42.5 | 41.7 | 133 | 133 |
| 623.xalancbmk_s | 64 | 150 | 9.46 | 19.5 | 78.8 | 130 | 132 | 148 | 9.58 | 19.3 | 79.8 | 130 | 132 | 151 | 9.40 | 19.7 | 78.1 | 131 | 133 |
| 625.x264_s | 64 | 140 | 12.6 | 18.4 | 104 | 131 | 132 | 139 | 12.7 | 18.2 | 106 | 131 | 132 | 139 | 12.7 | 18.3 | 105 | 131 | 132 |
| 631.deepsjeng_s | 64 | 289 | 4.95 | 37.9 | 41.1 | 131 | 141 | 290 | 4.94 | 37.9 | 41.1 | 131 | 142 | 289 | 4.95 | 38.0 | 41.0 | 131 | 151 |
| 641.leela_s | 64 | 398 | 4.29 | 51.3 | 36.0 | 129 | 131 | 398 | 4.29 | 51.5 | 35.9 | 130 | 130 | 397 | 4.29 | 51.3 | 36.0 | 129 | 130 |
| 648.exchange2_s | 64 | 175 | 16.8 | 22.7 | 141 | 130 | 130 | 175 | 16.8 | 22.9 | 140 | 131 | 131 | 175 | 16.8 | 22.8 | 141 | 130 | 130 |
| 657.xz_s | 64 | 297 | 20.8 | 47.7 | 141 | 161 | 325 | 297 | 20.8 | 47.9 | 141 | 161 | 327 | 297 | 20.8 | 47.5 | 142 | 160 | 325 |
| Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECspeed®2017_int_peak | 9.20 | ||||||||||||||||||
| SPECspeed®2017_int_energy_peak | 74.3 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 600.perlbench_s | 1 | 342 | 5.19 | 44.8 | 43.0 | 131 | 135 | 342 | 5.19 | 44.8 | 43.0 | 131 | 135 | 342 | 5.19 | 44.8 | 43.0 | 131 | 136 |
| 602.gcc_s | 1 | 406 | 9.80 | 54.6 | 79.3 | 134 | 146 | 407 | 9.79 | 54.7 | 79.1 | 135 | 145 | 406 | 9.80 | 54.6 | 79.3 | 134 | 146 |
| 605.mcf_s | 1 | 289 | 16.3 | 39.0 | 132 | 135 | 148 | 289 | 16.3 | 39.1 | 132 | 135 | 149 | 289 | 16.4 | 39.0 | 132 | 135 | 148 |
| 620.omnetpp_s | 64 | 319 | 5.11 | 42.4 | 41.8 | 133 | 134 | 322 | 5.07 | 42.7 | 41.5 | 133 | 133 | 320 | 5.10 | 42.5 | 41.7 | 133 | 133 |
| 623.xalancbmk_s | 1 | 137 | 10.3 | 17.9 | 85.8 | 131 | 131 | 137 | 10.3 | 18.0 | 85.6 | 131 | 132 | 137 | 10.4 | 17.9 | 86.1 | 131 | 131 |
| 625.x264_s | 1 | 136 | 13.0 | 17.9 | 107 | 132 | 132 | 135 | 13.0 | 17.8 | 108 | 131 | 132 | 136 | 13.0 | 17.8 | 108 | 131 | 132 |
| 631.deepsjeng_s | 1 | 284 | 5.05 | 37.3 | 41.8 | 131 | 148 | 284 | 5.05 | 37.3 | 41.7 | 132 | 142 | 284 | 5.05 | 37.3 | 41.8 | 131 | 142 |
| 641.leela_s | 64 | 398 | 4.29 | 51.3 | 36.0 | 129 | 131 | 398 | 4.29 | 51.5 | 35.9 | 130 | 130 | 397 | 4.29 | 51.3 | 36.0 | 129 | 130 |
| 648.exchange2_s | 1 | 175 | 16.8 | 22.7 | 141 | 130 | 130 | 175 | 16.8 | 22.9 | 139 | 131 | 131 | 175 | 16.8 | 22.8 | 141 | 130 | 131 |
| 657.xz_s | 64 | 297 | 20.8 | 47.7 | 141 | 161 | 328 | 297 | 20.8 | 47.7 | 141 | 161 | 327 | 297 | 20.8 | 47.8 | 141 | 161 | 327 |
The AMD64 AOCC Compiler Suite is available at http://developer.amd.com/amd-aocc/
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
'ulimit -s unlimited' was used to set environment stack size 'ulimit -l 2097152' was used to set environment locked pages in memory limit runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu <etc> Set dirty_ratio=8 to limit dirty cache to 8% of memory Set swappiness=1 to swap only if necessary Set zone_reclaim_mode=1 to free local node memory and avoid remote memory sync then drop_caches=3 to reset caches before invoking runcpu dirty_ratio, swappiness, zone_reclaim_mode and drop_caches were all set using privileged echo (e.g. echo 1 > /proc/sys/vm/swappiness). Transparent huge pages set to 'always' for this run (OS default)
Environment variables set by runcpu before the start of the run:
GOMP_CPU_AFFINITY = "0-63"
LD_LIBRARY_PATH =
"/home/cpu2017-1.1.0-amd-rome-aocc200-C1/amd_speed_aocc200_rome_C_lib/64
;/home/cpu2017-1.1.0-amd-rome-aocc200-C1/amd_speed_aocc200_rome_C_lib/32
:"
MALLOC_CONF = "retain:true"
OMP_DYNAMIC = "false"
OMP_SCHEDULE = "static"
OMP_STACKSIZE = "128M"
OMP_THREAD_LIMIT = "64"
Environment variables set by runcpu during the 600.perlbench_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 602.gcc_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 605.mcf_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 623.xalancbmk_s peak run:
GOMP_CPU_AFFINITY = "0"
OMP_STACKSIZE = "128M"
Environment variables set by runcpu during the 625.x264_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 631.deepsjeng_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 648.exchange2_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 657.xz_s peak run:
GOMP_CPU_AFFINITY = "0-63"
Binaries were compiled on a system with 2x AMD EPYC 7601 CPU + 512GB Memory using Fedora 26 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2018-3640 (Spectre variant 3a) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2018-3639 (Spectre variant 4) is mitigated in the system as tested and documented. jemalloc: configured and built with GCC v9.1.0 in Ubuntu 19.04 with -O3 -znver2 -flto jemalloc 5.1.0 is available here: https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2
BIOS settings:
cTDP Control set to Manual then set it to 240
Memory Speed set to Auto
SMT Mode set to Disabled
EfficiencyModeEn set to Auto
NUMA nodes per socket set to NPS4
Sysinfo program /home/cpu2017-1.1.0-amd-rome-aocc200-C1/bin/sysinfo
Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011
running on localhost.localdomain Mon Oct 21 18:27:43 2019
SUT (System Under Test) info as seen by some common utilities.
For more information on this section, see
https://www.spec.org/cpu2017/Docs/config.html#sysinfo
From /proc/cpuinfo
model name : AMD EPYC 7742 64-Core Processor
1 "physical id"s (chips)
64 "processors"
cores, siblings (Caution: counting these is hw and system dependent. The following
excerpts from /proc/cpuinfo might not be reliable. Use with caution.)
cpu cores : 64
siblings : 64
physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
53 54 55 56 57 58 59 60 61 62 63
From lscpu:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 64
On-line CPU(s) list: 0-63
Thread(s) per core: 1
Core(s) per socket: 64
Socket(s): 1
NUMA node(s): 4
Vendor ID: AuthenticAMD
CPU family: 23
Model: 49
Model name: AMD EPYC 7742 64-Core Processor
Stepping: 0
CPU MHz: 2253.111
CPU max MHz: 2250.0000
CPU min MHz: 1500.0000
BogoMIPS: 4491.44
Virtualization: AMD-V
L1d cache: 32K
L1i cache: 32K
L2 cache: 512K
L3 cache: 16384K
NUMA node0 CPU(s): 0-15
NUMA node1 CPU(s): 16-31
NUMA node2 CPU(s): 32-47
NUMA node3 CPU(s): 48-63
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm
constant_tsc rep_good nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf pni
pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c
rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb
cat_l3 cdp_l3 hw_pstate sme ssbd sev ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep
bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves
cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr wbnoinvd
arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists
pausefilter pfthreshold avic v_vmsave_vmload vgif umip rdpid overflow_recov succor
smca
/proc/cpuinfo cache data
cache size : 512 KB
From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a
physical chip.
available: 4 nodes (0-3)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 64303 MB
node 0 free: 63983 MB
node 1 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
node 1 size: 64497 MB
node 1 free: 64257 MB
node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
node 2 size: 64497 MB
node 2 free: 64226 MB
node 3 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
node 3 size: 64460 MB
node 3 free: 64185 MB
node distances:
node 0 1 2 3
0: 10 12 12 12
1: 12 10 12 12
2: 12 12 10 12
3: 12 12 12 10
From /proc/meminfo
MemTotal: 263945304 kB
HugePages_Total: 0
Hugepagesize: 2048 kB
From /etc/*release* /etc/*version*
os-release:
NAME="Red Hat Enterprise Linux"
VERSION="8.0 (Ootpa)"
ID="rhel"
ID_LIKE="fedora"
VERSION_ID="8.0"
PLATFORM_ID="platform:el8"
PRETTY_NAME="Red Hat Enterprise Linux 8.0 (Ootpa)"
ANSI_COLOR="0;31"
redhat-release: Red Hat Enterprise Linux release 8.0 (Ootpa)
system-release: Red Hat Enterprise Linux release 8.0 (Ootpa)
system-release-cpe: cpe:/o:redhat:enterprise_linux:8.0:ga
uname -a:
Linux localhost.localdomain 4.18.0-80.el8.x86_64 #1 SMP Wed Mar 13 12:02:46 UTC 2019
x86_64 x86_64 x86_64 GNU/Linux
Kernel self-reported vulnerability status:
CVE-2018-3620 (L1 Terminal Fault): Not affected
Microarchitectural Data Sampling: No status reported
CVE-2017-5754 (Meltdown): Not affected
CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled
via prctl and seccomp
CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer sanitization
CVE-2017-5715 (Spectre variant 2): Mitigation: Full AMD retpoline, IBPB:
conditional, IBRS_FW, STIBP: disabled, RSB
filling
run-level 3 Oct 21 18:19
SPEC is set to: /home/cpu2017-1.1.0-amd-rome-aocc200-C1
Filesystem Type Size Used Avail Use% Mounted on
/dev/sdb2 xfs 838G 34G 804G 4% /home
From /sys/devices/virtual/dmi/id
BIOS: Lenovo CFE105D 09/17/2019
Vendor: Lenovo
Product: ThinkSystem SR655 -[7Y00000000]-
Product Family: ThinkSystem
Serial: 0123456789
Additional information from dmidecode follows. WARNING: Use caution when you interpret
this section. The 'dmidecode' program reads system data which is "intended to allow
hardware to be accurately determined", but the intent may not be met, as there are
frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
Memory:
8x Samsung M393A4K40DB2-CWE 32 kB 2 rank 3200
8x Unknown Unknown
(End of data from sysinfo program)
==============================================================================
C | 600.perlbench_s(base, peak) 602.gcc_s(base, peak) 605.mcf_s(base,
| peak) 625.x264_s(base, peak) 657.xz_s(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
C++ | 623.xalancbmk_s(peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: i386-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
C++ | 620.omnetpp_s(base, peak) 623.xalancbmk_s(base)
| 631.deepsjeng_s(base, peak) 641.leela_s(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
C++ | 623.xalancbmk_s(peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: i386-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
C++ | 620.omnetpp_s(base, peak) 623.xalancbmk_s(base)
| 631.deepsjeng_s(base, peak) 641.leela_s(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
Fortran | 648.exchange2_s(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
| 600.perlbench_s: | -DSPEC_LINUX_X64 -DSPEC_LP64 |
| 602.gcc_s: | -DSPEC_LP64 |
| 605.mcf_s: | -DSPEC_LP64 |
| 620.omnetpp_s: | -DSPEC_LP64 |
| 623.xalancbmk_s: | -DSPEC_LINUX -DSPEC_LP64 |
| 625.x264_s: | -DSPEC_LP64 |
| 631.deepsjeng_s: | -DSPEC_LP64 |
| 641.leela_s: | -DSPEC_LP64 |
| 648.exchange2_s: | -DSPEC_LP64 |
| 657.xz_s: | -DSPEC_LP64 |
| -Wno-return-type |
| -Wno-return-type |
| -Wno-return-type |
| 600.perlbench_s: | -DSPEC_LINUX_X64 -DSPEC_LP64 |
| 602.gcc_s: | -DSPEC_LP64 |
| 605.mcf_s: | -DSPEC_LP64 |
| 620.omnetpp_s: | -DSPEC_LP64 |
| 623.xalancbmk_s: | -DSPEC_LINUX -D_FILE_OFFSET_BITS=64 |
| 625.x264_s: | -DSPEC_LP64 |
| 631.deepsjeng_s: | -DSPEC_LP64 |
| 641.leela_s: | -DSPEC_LP64 |
| 648.exchange2_s: | -DSPEC_LP64 |
| 657.xz_s: | -DSPEC_LP64 |