# Invocation command line: # /home/cpu2006/bin/runspec --flagsurl=Intel-ic17.0-official-linux64.xml,NEC-Platform-Settings-V1.2-110i-RevA.xml -c cpu2006-1.2-ic17.0-lin-sse4.2-speed-20160922.cfg --define cores=2 --tune base,peak -o all fp # output_root was not used for this run ############################################################################ ############################################################################ # SPEC CPU2006 precompiled subbenchmark config file # 20160922 Intel(R) C/C++ and Fortran 17.0 Compilers for Linux ############################################################################ ############################################################################ # This is config file targets: # # Compiler name/version: Intel(R) C/C++ and Fortran 17.0 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.2, GLIBC 2.17 # Hardware: Intel(R) processors supporting SSE4.2 tuning # ############################################################################ # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20160922 ext = cpu2006-1.2-ic17.0-lin-sse4.2-speed-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate tune = base,peak PATHSEP = / makeflags= -j8 check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6993 -f -p use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic17.0-official-linux64.xml %ifdef %{default-platform-flags} flagsurl2=Default-Platform-Flags.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh10.2 # Set some environment variables preENV_OMP_NUM_THREADS = %{cores} %ifdef %{intspeed} preENV_KMP_AFFINITY = granularity=fine,scatter %else preENV_KMP_AFFINITY = granularity=fine,compact,1,0 %endif int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = /sh10.2 SMARTHEAP64_DIR = /sh10.2 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler Global Tuning Options #################################################################### default: SSE = -xSSE4.2 FAST_NO_STATIC = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FAST_NO_STATIC) -parallel -qopt-prefetch -auto-p32 CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -auto-p32 fp=base=default=default: FOPTIMIZE= $(FAST_NO_STATIC) -parallel -qopt-prefetch COPTIMIZE= $(FAST_NO_STATIC) -parallel -qopt-prefetch CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCXXFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCXXFLAGS = -prof-use $(FAST_NO_STATIC) 400.perlbench,401.bzip2,429.mcf,445.gobmk,458.sjeng,464.h264ref,471.omnetpp,473.astar,483.xalancbmk=peak: submit = taskset -c $SPECCOPYNUM $command 400.perlbench=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 PORTABILITY= -D_FILE_OFFSET_BITS=64 CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -qopt-prefetch 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -qopt-prefetch -no-prec-div 403.gcc=peak=default: feedback=0 COPTIMIZE= -inline-calloc -qopt-malloc-options=3 -auto-ilp32 OPTIMIZE= $(FAST_NO_STATIC) 429.mcf=peak=default: feedback=0 COPTIMIZE= -parallel -qopt-prefetch -auto-p32 OPTIMIZE= $(FAST_NO_STATIC) 445.gobmk=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 PORTABILITY= -D_FILE_OFFSET_BITS=64 COPTIMIZE= 456.hmmer=peak=default: basepeak=yes 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: basepeak=yes 471.omnetpp=peak=default: CXX= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= -qopt-ra-region-strategy=block 473.astar=peak=default: feedback=0 CXXOPTIMIZE= -qopt-prefetch -auto-p32 OPTIMIZE= $(FAST_NO_STATIC) 483.xalancbmk=peak=default: feedback=0 CXX= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= -qopt-prefetch OPTIMIZE= $(FAST_NO_STATIC) ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_FFLAGS = -prof-gen -par-num-threads=1 PASS2_FFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDFLAGS = -prof-gen -par-num-threads=1 PASS2_LDFLAGS = -prof-use $(FAST_NO_STATIC) 410.bwaves=peak=default: basepeak=yes 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) 459.GemsFDTD=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -qopt-prefetch -parallel 465.tonto=peak=default: OPTIMIZE= -inline-calloc -qopt-malloc-options=3 -auto -unroll4 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: #include: SUT.inc # ----- Begin inclusion of 'SUT.inc' ############################################################################ default=default=default=default: license_num = 9006 test_sponsor = NEC Corporation hw_avail = Apr-2017 sw_avail = Jan-2017 tester = NEC Corporation hw_cpu_name = Intel Celeron G3930 hw_cpu_char = # hw_cpu_char = Intel Turbo Boost Technology disabled # hw_cpu_char = Intel Turbo Boost Technology up to 3.70 GHz hw_cpu_mhz = 2900 hw_disk = 1 x 1 TB SATA, 7200 RPM hw_fpu = Integrated hw_memory000 = 32 GB (2 x 16 GB 2Rx8 PC4-2400T-E, running at hw_memory001 = 2133 MHz) hw_model = Express5800/T110i (Intel Celeron G3930) hw_ncpuorder = 1 chip hw_ncores = 2 hw_nchips = 1 hw_ncoresperchip = 2 hw_nthreadspercore = 1 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 2 MB I+D on chip per chip hw_ocache = None hw_vendor = NEC Corporation prepared_by = NEC Corporation sw_file = ext4 sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = Kernel 3.10.0-514.6.1.el7.x86_64 sw_state = Run level 3 (multi-user) # notes_plat_000 = Default BIOS settings were used. notes_plat_000 = BIOS Settings: notes_plat_005 = Power Management Policy: Custom notes_plat_010 = Energy Performance: Performance # notes_plat_015 = DCU Streamer Prefetcher: Disabled # notes_plat_020 = Hardware Prefetcher: Disabled # notes_plat_025 = Adjacent Cache Line Prefetch: Disabled # notes_plat_030 = Hyper-Threading: Disabled # ---- End inclusion of '/home/cpu2006/config/SUT.inc' notes_025 = Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM notes_030 = memory using Redhat Enterprise Linux 7.2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" int=default=default=default: sw_compiler001 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler002 = Compiler for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other001 = Microquill SmartHeap V10.2 default: %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_035 = Transparent Huge Pages enabled by default. %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1 > /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler000 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler001 = Compiler for Linux; sw_compiler002 = Fortran: Version 17.0.0.098 of Intel Fortran sw_compiler003 = Compiler for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit sw_other = None # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6993 -f -p' default: # Sysinfo program /home/cpu2006/config/sysinfo.rev6993 # Revision 6993 of 2015-11-06 (b5e8d4b4eb51ed28d7f98696cbe290c1) # running on t110i Tue May 30 06:15:19 2017 # # This section contains SUT (System Under Test) info as seen by # some common utilities. To remove or add to this section, see: # http://www.spec.org/cpu2006/Docs/config.html#sysinfo # # From /proc/cpuinfo # model name : Intel(R) Celeron(R) CPU G3930 @ 2.90GHz # 1 "physical id"s (chips) # 2 "processors" # cores, siblings (Caution: counting these is hw and system dependent. The # following excerpts from /proc/cpuinfo might not be reliable. Use with # caution.) # cpu cores : 2 # siblings : 2 # physical 0: cores 0 1 # cache size : 2048 KB # # From /proc/meminfo # MemTotal: 32891384 kB # HugePages_Total: 0 # Hugepagesize: 2048 kB # # From /etc/*release* /etc/*version* # os-release: # NAME="Red Hat Enterprise Linux Server" # VERSION="7.3 (Maipo)" # ID="rhel" # ID_LIKE="fedora" # VERSION_ID="7.3" # PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" # ANSI_COLOR="0;31" # CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" # redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) # system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) # system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server # # uname -a: # Linux t110i 3.10.0-514.6.1.el7.x86_64 #1 SMP Sat Dec 10 11:15:38 EST 2016 # x86_64 x86_64 x86_64 GNU/Linux # # run-level 3 May 30 06:09 # # SPEC is set to: /home/cpu2006 # Filesystem Type Size Used Avail Use% Mounted on # /dev/sda3 ext4 909G 43G 820G 5% / # Additional information from dmidecode: # # Warning: Use caution when you interpret this section. The 'dmidecode' program # reads system data which is "intended to allow hardware to be accurately # determined", but the intent may not be met, as there are frequent changes to # hardware, firmware, and the "DMTF SMBIOS" standard. # # BIOS American Megatrends Inc. 5.0.0003 02/24/2017 # Memory: # 2x 0000 # 2x Samsung M391A2K43BB1-CRC 16 GB 2 rank 2400 MHz, configured at 2133 MHz # # (End of data from sysinfo program) # hw_cpu_name = Intel Celeron G3930 # hw_disk = 909 GB add more disk info here # hw_memory001 = 31.368 GB fixme: If using DDR3, format is: # hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' # hw_nchips = 1 # prepared_by = root (is never output, only tags rawfile) # sw_file = ext4 # sw_os001 = Red Hat Enterprise Linux Server release 7.3 (Maipo) # sw_os002 = 3.10.0-514.6.1.el7.x86_64 # sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 459.GemsFDTD: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 454.calculix: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: flagsurl001 = http://www.spec.org/cpu2006/flags/NEC-Platform-Settings-V1.2-110i-RevA.xml notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_010 =LD_LIBRARY_PATH = "/home/cpu2006/libs/32:/home/cpu2006/libs/64:/home/cpu2006/sh10.2" notes_015 =OMP_NUM_THREADS = "2" notes_020 =