SPEC(R) CFP2006 Summary Inspur Corporation Inspur NF5180M4 (Intel Xeon E5-2660 v4) Fri May 5 18:36:45 2017 CPU2006 License: 3358 Test date: May-2017 Test sponsor: Inspur Corporation Hardware availability: Mar-2016 Tested by: Inspur Corporation Software availability: Nov-2016 Base Base Base Peak Peak Peak Benchmarks Copies Run Time Rate Copies Run Time Rate -------------- ------ --------- --------- ------ --------- --------- 410.bwaves 56 1243 612 S 28 563 676 * 410.bwaves 56 1245 611 * 28 562 677 S 410.bwaves 56 1246 611 S 28 564 674 S 416.gamess 56 1162 944 * 56 1127 973 S 416.gamess 56 1158 947 S 56 1124 975 S 416.gamess 56 1162 944 S 56 1125 975 * 433.milc 56 797 645 S 56 797 645 S 433.milc 56 797 645 S 56 797 645 S 433.milc 56 797 645 * 56 797 645 * 434.zeusmp 56 478 1070 S 56 478 1070 S 434.zeusmp 56 479 1060 S 56 479 1060 S 434.zeusmp 56 478 1070 * 56 478 1070 * 435.gromacs 56 338 1180 S 56 334 1200 * 435.gromacs 56 342 1170 S 56 341 1170 S 435.gromacs 56 339 1180 * 56 333 1200 S 436.cactusADM 56 572 1170 * 56 572 1170 * 436.cactusADM 56 571 1170 S 56 571 1170 S 436.cactusADM 56 572 1170 S 56 572 1170 S 437.leslie3d 56 1199 439 * 28 561 469 S 437.leslie3d 56 1209 435 S 28 562 468 S 437.leslie3d 56 1197 440 S 28 561 469 * 444.namd 56 596 754 S 56 590 761 S 444.namd 56 594 756 S 56 591 760 * 444.namd 56 595 754 * 56 592 759 S 447.dealII 56 429 1490 S 56 429 1490 S 447.dealII 56 427 1500 S 56 427 1500 S 447.dealII 56 428 1500 * 56 428 1500 * 450.soplex 56 907 515 S 28 407 574 S 450.soplex 56 904 517 S 28 407 573 * 450.soplex 56 904 517 * 28 410 570 S 453.povray 56 240 1240 * 56 205 1450 S 453.povray 56 243 1230 S 56 205 1450 * 453.povray 56 240 1240 S 56 203 1460 S 454.calculix 56 312 1480 * 56 312 1480 * 454.calculix 56 312 1480 S 56 312 1480 S 454.calculix 56 312 1480 S 56 312 1480 S 459.GemsFDTD 56 1425 417 S 28 689 431 S 459.GemsFDTD 56 1424 417 * 28 688 432 S 459.GemsFDTD 56 1424 417 S 28 689 431 * 465.tonto 56 570 967 * 56 545 1010 * 465.tonto 56 571 965 S 56 546 1010 S 465.tonto 56 570 967 S 56 543 1020 S 470.lbm 56 930 827 S 56 930 827 S 470.lbm 56 929 828 * 56 929 828 * 470.lbm 56 929 828 S 56 929 828 S 481.wrf 56 774 808 * 56 774 808 * 481.wrf 56 772 810 S 56 772 810 S 481.wrf 56 777 805 S 56 777 805 S 482.sphinx3 56 1274 857 * 56 1274 857 * 482.sphinx3 56 1281 852 S 56 1281 852 S 482.sphinx3 56 1268 861 S 56 1268 861 S ============================================================================== 410.bwaves 56 1245 611 * 28 563 676 * 416.gamess 56 1162 944 * 56 1125 975 * 433.milc 56 797 645 * 56 797 645 * 434.zeusmp 56 478 1070 * 56 478 1070 * 435.gromacs 56 339 1180 * 56 334 1200 * 436.cactusADM 56 572 1170 * 56 572 1170 * 437.leslie3d 56 1199 439 * 28 561 469 * 444.namd 56 595 754 * 56 591 760 * 447.dealII 56 428 1500 * 56 428 1500 * 450.soplex 56 904 517 * 28 407 573 * 453.povray 56 240 1240 * 56 205 1450 * 454.calculix 56 312 1480 * 56 312 1480 * 459.GemsFDTD 56 1424 417 * 28 689 431 * 465.tonto 56 570 967 * 56 545 1010 * 470.lbm 56 929 828 * 56 929 828 * 481.wrf 56 774 808 * 56 774 808 * 482.sphinx3 56 1274 857 * 56 1274 857 * SPECfp(R)_rate_base2006 847 SPECfp_rate2006 875 HARDWARE -------- CPU Name: Intel Xeon E5-2660 v4 CPU Characteristics: Intel Turbo Boost Technology up to 3.20 GHz CPU MHz: 2000 FPU: Integrated CPU(s) enabled: 28 cores, 2 chips, 14 cores/chip, 2 threads/core CPU(s) orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core L3 Cache: 35 MB I+D on chip per chip Other Cache: None Memory: 256 GB (16 x 16 GB 2Rx4 PC4-2400T-R) Disk Subsystem: 1 x 450 GB SATA SSD Other Hardware: None SOFTWARE -------- Operating System: Red Hat Enterprise Linux Server release 7.3 (Maipo) 3.10.0-514.el7.x86_64 Compiler: C/C++: Version 17.0.0.098 of Intel C/C++ Compiler for Linux Auto Parallel: No File System: xfs System State: Run level 5 (multi-user) Base Pointers: 32/64-bit Peak Pointers: 32/64-bit Other Software: None Submit Notes ------------ The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file. Operating System Notes ---------------------- Stack size set to unlimited using "ulimit -s unlimited" Platform Notes -------------- BIOS and OS configuration: SCALING_GOVERNOR set to Performance Hardware Prefetch set to Disable VT Support set to Disable C1E Support set to Disable Sysinfo program /home/CPU2006/config/sysinfo.rev6993 Revision 6993 of 2015-11-06 (b5e8d4b4eb51ed28d7f98696cbe290c1) running on localhost.localdomain Fri May 5 18:36:47 2017 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/cpu2006/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz 2 "physical id"s (chips) 56 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 14 siblings : 28 physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 cache size : 17920 KB From /proc/meminfo MemTotal: 263847500 kB HugePages_Total: 0 Hugepagesize: 2048 kB From /etc/*release* /etc/*version* os-release: NAME="Red Hat Enterprise Linux Server" VERSION="7.3 (Maipo)" ID="rhel" ID_LIKE="fedora" VERSION_ID="7.3" PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server uname -a: Linux localhost.localdomain 3.10.0-514.el7.x86_64 #1 SMP Wed Oct 19 11:24:13 EDT 2016 x86_64 x86_64 x86_64 GNU/Linux run-level 5 May 4 11:13 SPEC is set to: /home/CPU2006 Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/rhel-home xfs 392G 108G 285G 28% /home Additional information from dmidecode: Warning: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. BIOS American Megatrends Inc. 4.1.11 08/11/2016 Memory: 8x NO DIMM NO DIMM 16x Samsung M393A2G40EB1-CRC 16 GB 2 rank 2400 MHz (End of data from sysinfo program) General Notes ------------- Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/home/CPU2006/libs/32:/home/CPU2006/libs/64:/home/CPU2006/sh10.2" Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM memory using Redhat Enterprise Linux 7.2 Transparent Huge Pages enabled by default Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec Base Compiler Invocation ------------------------ C benchmarks: icc -m64 C++ benchmarks: icpc -m64 Fortran benchmarks: ifort -m64 Benchmarks using both Fortran and C: icc -m64 ifort -m64 Base Portability Flags ---------------------- 410.bwaves: -DSPEC_CPU_LP64 416.gamess: -DSPEC_CPU_LP64 433.milc: -DSPEC_CPU_LP64 434.zeusmp: -DSPEC_CPU_LP64 435.gromacs: -DSPEC_CPU_LP64 -nofor_main 436.cactusADM: -DSPEC_CPU_LP64 -nofor_main 437.leslie3d: -DSPEC_CPU_LP64 444.namd: -DSPEC_CPU_LP64 447.dealII: -DSPEC_CPU_LP64 450.soplex: -DSPEC_CPU_LP64 453.povray: -DSPEC_CPU_LP64 454.calculix: -DSPEC_CPU_LP64 -nofor_main 459.GemsFDTD: -DSPEC_CPU_LP64 465.tonto: -DSPEC_CPU_LP64 470.lbm: -DSPEC_CPU_LP64 481.wrf: -DSPEC_CPU_LP64 -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 482.sphinx3: -DSPEC_CPU_LP64 Base Optimization Flags ----------------------- C benchmarks: -xCORE-AVX2 -ipo -O3 -no-prec-div -qopt-prefetch -auto-p32 -qopt-mem-layout-trans=3 C++ benchmarks: -xCORE-AVX2 -ipo -O3 -no-prec-div -qopt-prefetch -auto-p32 -qopt-mem-layout-trans=3 Fortran benchmarks: -xCORE-AVX2 -ipo -O3 -no-prec-div -qopt-prefetch Benchmarks using both Fortran and C: -xCORE-AVX2 -ipo -O3 -no-prec-div -qopt-prefetch -auto-p32 -qopt-mem-layout-trans=3 Peak Compiler Invocation ------------------------ C benchmarks: icc -m64 C++ benchmarks (except as noted below): icpc -m64 450.soplex: icpc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 Fortran benchmarks: ifort -m64 Benchmarks using both Fortran and C: icc -m64 ifort -m64 Peak Portability Flags ---------------------- 410.bwaves: -DSPEC_CPU_LP64 416.gamess: -DSPEC_CPU_LP64 433.milc: -DSPEC_CPU_LP64 434.zeusmp: -DSPEC_CPU_LP64 435.gromacs: -DSPEC_CPU_LP64 -nofor_main 436.cactusADM: -DSPEC_CPU_LP64 -nofor_main 437.leslie3d: -DSPEC_CPU_LP64 444.namd: -DSPEC_CPU_LP64 447.dealII: -DSPEC_CPU_LP64 450.soplex: -D_FILE_OFFSET_BITS=64 453.povray: -DSPEC_CPU_LP64 454.calculix: -DSPEC_CPU_LP64 -nofor_main 459.GemsFDTD: -DSPEC_CPU_LP64 465.tonto: -DSPEC_CPU_LP64 470.lbm: -DSPEC_CPU_LP64 481.wrf: -DSPEC_CPU_LP64 -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 482.sphinx3: -DSPEC_CPU_LP64 Peak Optimization Flags ----------------------- C benchmarks: 433.milc: basepeak = yes 470.lbm: basepeak = yes 482.sphinx3: basepeak = yes C++ benchmarks: 444.namd: -prof-gen(pass 1) -prof-use(pass 2) -xCORE-AVX2(pass 2) -par-num-threads=1(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -fno-alias -auto-ilp32 -qopt-mem-layout-trans=3 447.dealII: basepeak = yes 450.soplex: -prof-gen(pass 1) -prof-use(pass 2) -xCORE-AVX2(pass 2) -par-num-threads=1(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -qopt-malloc-options=3 -qopt-mem-layout-trans=3 453.povray: -prof-gen(pass 1) -prof-use(pass 2) -xCORE-AVX2(pass 2) -par-num-threads=1(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -unroll4 -qopt-mem-layout-trans=3 Fortran benchmarks: 410.bwaves: -xCORE-AVX2 -ipo -O3 -no-prec-div -qopt-prefetch 416.gamess: -prof-gen(pass 1) -prof-use(pass 2) -xCORE-AVX2(pass 2) -par-num-threads=1(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -unroll2 -inline-level=0 -scalar-rep- 434.zeusmp: basepeak = yes 437.leslie3d: Same as 410.bwaves 459.GemsFDTD: Same as 410.bwaves 465.tonto: -prof-gen(pass 1) -prof-use(pass 2) -xCORE-AVX2(pass 2) -par-num-threads=1(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -unroll4 -auto -inline-calloc -qopt-malloc-options=3 Benchmarks using both Fortran and C: 435.gromacs: -prof-gen(pass 1) -prof-use(pass 2) -xCORE-AVX2(pass 2) -par-num-threads=1(pass 1) -qopt-prefetch -auto-ilp32 -qopt-mem-layout-trans=3 436.cactusADM: basepeak = yes 454.calculix: basepeak = yes 481.wrf: basepeak = yes The flags files that were used to format this result can be browsed at http://www.spec.org/cpu2006/flags/Intel-ic17.0-official-linux64.html http://www.spec.org/cpu2006/flags/Inspur-Platform-Settings-V1.0-HSW.html You can also download the XML flags sources by saving the following links: http://www.spec.org/cpu2006/flags/Intel-ic17.0-official-linux64.xml http://www.spec.org/cpu2006/flags/Inspur-Platform-Settings-V1.0-HSW.xml SPEC and SPECfp are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ----------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 2006-2017 Standard Performance Evaluation Corporation Tested with SPEC CPU2006 v1.2. Report generated on Tue May 30 15:31:17 2017 by CPU2006 ASCII formatter v6932. Originally published on 30 May 2017.