SPEC® CINT2006 Result

Copyright 2006-2017 Standard Performance Evaluation Corporation

Hewlett Packard Enterprise (Test Sponsor: HPE)

ProLiant ML30 Gen9
(3.90 GHz, Intel Xeon E3-1280 v6)

SPECint®_rate2006 = Not Run

CPU2006 license: 3 Test date: Mar-2017
Test sponsor: HPE Hardware Availability: May-2017
Tested by: HPE Software Availability: Nov-2016
Benchmark results graph
Hardware
CPU Name: Intel Xeon E3-1280 v6
CPU Characteristics: Intel Turbo Boost Technology up to 4.20 GHz
CPU MHz: 3900
FPU: Integrated
CPU(s) enabled: 4 cores, 1 chip, 4 cores/chip, 2 threads/core
CPU(s) orderable: 1 chips
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 256 KB I+D on chip per core
L3 Cache: 8 MB I+D on chip per chip
Other Cache: None
Memory: 64 GB (4 x 16 GB 2Rx8 PC4-2400T-E)
Disk Subsystem: 1 x 1 TB SATA 7.2 K RPM, RAID 0
Other Hardware: None
Software
Operating System: Red Hat Enterprise Linux Server 7.3
Kernel 3.10.0-514
Compiler: C/C++: Version 17.0.0.098 of Intel C/C++
Compiler for Linux
Auto Parallel: No
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 32-bit
Peak Pointers: Not Applicable
Other Software: Microquill SmartHeap V10.2

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
400.perlbench 8 364   215 364   215 363   215
401.bzip2 8 627   123 630   123 626   123
403.gcc 8 294   219 290   222 291   222
429.mcf 8 221   330 222   329 222   328
445.gobmk 8 465   180 465   180 464   181
456.hmmer 8 168   444 169   443 169   442
458.sjeng 8 511   189 511   189 511   189
462.libquantum 8 58.0 2860 58.2 2850 58.1 2860
464.h264ref 8 509   348 504   351 508   348
471.omnetpp 8 414   121 415   121 414   121
473.astar 8 389   144 389   144 390   144
483.xalancbmk 8 173   319 174   318 174   318

Submit Notes

 The taskset mechanism was used to bind copies to processors. The config file option 'submit'
 was used to generate taskset commands to bind each copy to a specific processor.
 For details, please see the config file.

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"
 Transparent Huge Pages enabled by default
 Filesystem page cache cleared with:
 echo 1 >       /proc/sys/vm/drop_caches
 runspec command invoked through numactl i.e.:
 numactl --interleave=all runspec <etc>

Platform Notes

 BIOS Configuration:
    Power Profile set to Custom
    Minimum Processor Idle Power Core C-State set to C3 State
    Minimum Processor Idle Power Package C-State set to No Package State
    Energy/Performance Bias set to Maximum Performance
    Thermal Configuration set to Maximum Cooling
    Processor Power and Utilization Monitoring set to Disabled
    Memory Double Refresh Rate set to 1x Refresh
    NUMA Group Size Optimization set to Flat

 Sysinfo program /hpe/cpu2006/config/sysinfo.rev6993
 Revision 6993 of 2015-11-06 (b5e8d4b4eb51ed28d7f98696cbe290c1)
 running on ML30-G9-RHEL7.3 Mon Mar 27 01:40:29 2017

 This section contains SUT (System Under Test) info as seen by
 some common utilities.  To remove or add to this section, see:
   http://www.spec.org/cpu2006/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) CPU E3-1280 v6 @ 3.90GHz
       1 "physical id"s (chips)
       8 "processors"
    cores, siblings (Caution: counting these is hw and system dependent.  The
    following excerpts from /proc/cpuinfo might not be reliable.  Use with
    caution.)
       cpu cores : 4
       siblings  : 8
       physical 0: cores 0 1 2 3
    cache size : 8192 KB

 From /proc/meminfo
    MemTotal:       65585572 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 From /etc/*release* /etc/*version*
    os-release:
       NAME="Red Hat Enterprise Linux Server"
       VERSION="7.3 (Maipo)"
       ID="rhel"
       ID_LIKE="fedora"
       VERSION_ID="7.3"
       PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)"
       ANSI_COLOR="0;31"
       CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server"
    redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo)
    system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo)
    system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server

 uname -a:
    Linux ML30-G9-RHEL7.3 3.10.0-514.el7.x86_64 #1 SMP Wed Oct 19 11:24:13 EDT
    2016 x86_64 x86_64 x86_64 GNU/Linux

 run-level 3 Mar 25 11:22

 SPEC is set to: /hpe/cpu2006
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sda5      xfs   500G  126G  375G  26% /
 Additional information from dmidecode:

    Warning: Use caution when you interpret this section. The 'dmidecode' program
    reads system data which is "intended to allow hardware to be accurately
    determined", but the intent may not be met, as there are frequent changes to
    hardware, firmware, and the "DMTF SMBIOS" standard.

   BIOS HP U23 01/17/2017
   Memory:
    4x UNKNOWN NOT AVAILABLE 16 GB 2 rank 2400 MHz

 (End of data from sysinfo program)

General Notes

Environment variables set by runspec before the start of the run:
LD_LIBRARY_PATH = "/hpe/cpu2006/libs/32:/hpe/cpu2006/libs/64:/hpe/cpu2006/sh10.2"

 Binaries compiled on a system with 1x Intel Core i7-4790K CPU + 32GB RAM
 memory using Redhat Enterprise Linux 7.2

Base Compiler Invocation

C benchmarks:

 icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 

C++ benchmarks:

 icpc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 

Base Portability Flags

400.perlbench:  -D_FILE_OFFSET_BITS=64   -DSPEC_CPU_LINUX_IA32 
401.bzip2:  -D_FILE_OFFSET_BITS=64 
403.gcc:  -D_FILE_OFFSET_BITS=64 
429.mcf:  -D_FILE_OFFSET_BITS=64 
445.gobmk:  -D_FILE_OFFSET_BITS=64 
456.hmmer:  -D_FILE_OFFSET_BITS=64 
458.sjeng:  -D_FILE_OFFSET_BITS=64 
462.libquantum:  -D_FILE_OFFSET_BITS=64   -DSPEC_CPU_LINUX 
464.h264ref:  -D_FILE_OFFSET_BITS=64 
471.omnetpp:  -D_FILE_OFFSET_BITS=64 
473.astar:  -D_FILE_OFFSET_BITS=64 
483.xalancbmk:  -D_FILE_OFFSET_BITS=64   -DSPEC_CPU_LINUX 

Base Optimization Flags

C benchmarks:

 -xCORE-AVX2   -ipo   -O3   -no-prec-div   -no-prec-sqrt   -static   -qopt-prefetch   -qopt-mem-layout-trans=3   -auto-ilp32   -complex-limited-range   -qopt-prefetch-issue-excl-hint   -ansi-alias   -unroll-aggressive   -use-intel-optimized-headers   -qopt-matmul   -qopt-subscript-in-range   -qopt-assume-safe-padding   -qopt-calloc   -inline-calloc   -qopt-malloc-options=3 

C++ benchmarks:

 -xCORE-AVX2   -ipo   -O3   -no-prec-div   -qopt-prefetch   -qopt-mem-layout-trans=3   -use-intel-optimized-headers   -unroll-aggressive   -qopt-calloc   -inline-calloc   -qopt-malloc-options=3   -Wl,-z,muldefs   -L/hpe/cpu2006/sh10.2 -lsmartheap 

Base Other Flags

C benchmarks:

403.gcc:  -Dalloca=_alloca 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2006/flags/HPE-Compiler-Flags-Intel-V1.2-HSW-revI.html,
http://www.spec.org/cpu2006/flags/HPE-Platform-Flags-Intel-V1.2-HSW-revG.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2006/flags/HPE-Compiler-Flags-Intel-V1.2-HSW-revI.xml,
http://www.spec.org/cpu2006/flags/HPE-Platform-Flags-Intel-V1.2-HSW-revG.xml.