# Invocation command line: # /root/cpu2006-1.2/bin/runspec --define default-platform-flags --rate --copies 288 -c cpu2006-1.2-ic16.0u2-lin64-dt-mic-avx512-rate-20160518.cfg --define smt-on --define cores=288 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base,peak -o all fp # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 16.0u2 # Operating system version: 64-Bit RedHat Enterprise Linux64 7.2 # Hardware: Intel processors supporting MIC-AVX512 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # 20160518 Intel Compiler 16.0u2 for Linux64 ############################################################################ action = validate tune = base,peak # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20160518 ext = cpu2006-1.2-ic16.0u2-lin64-dt-mic-avx512-rate-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # PATHSEP = / check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6914 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64-revB.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2006/flags/Default-Platform-Flags.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin OBJ = .o SMARTHEAP32_DIR = /sh SMARTHEAP64_DIR = /sh PORTABILITY = -D_FILE_OFFSET_BITS=64 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif default: SSE = -xMIC-AVX512 FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -opt-prefetch CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch fp=base=default=default: OPTIMIZE= $(FAST) -opt-prefetch COPTIMIZE= -auto-p32 -ansi-alias CXXOPTIMIZE= -auto-p32 -ansi-alias ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 COPTIMIZE= -auto-ilp32 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -opt-prefetch -auto-ilp32 -ansi-alias 403.gcc=peak=default: COPTIMIZE = $(FASTNOSTATIC) feedback=0 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 feedback=no 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_FFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif 434.zeusmp=peak=default: basepeak=yes feedback=0 435.gromacs=peak=default: OPTIMIZE= -opt-prefetch 436.cactusADM=peak=default: basepeak=yes %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif 437.leslie3d=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin OPTIMIZE= -opt-malloc-options=3 CXXOPTIMIZE= 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3 470.lbm=peak=default: basepeak=yes %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 55 test_sponsor = Dell Inc. hw_avail = Jan-2017 sw_avail = Jan-2017 tester = Dell Inc. hw_cpu_name = Intel Trademarked CPU Name hw_cpu_char =Intel Turbo Boost Technology up to 1.70 GHz hw_cpu_mhz = 1500 hw_disk = 9999 GB SATA, 9999RPM hw_fpu = Integrated hw_memory000 = 400 GB (6 x 64 GB 2Rx8 PC4-2400T-R + 8 x 2 GB hw_model = PowerEdge C6320P (Intel Xeon Phi 7290 1.50 GHz) hw_ncpuorder = 1 chip hw_ncores = 72 hw_nchips = 9999 hw_ncoresperchip = 72 hw_nthreadspercore = 4 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per two cores hw_tcache = None hw_ocache = None hw_vendor = Dell Inc. prepared_by = sw_file = xfs sw_os001 = RedHat EL 7.2 sw_state = Run level 3 (multi-user) notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %ifdef %{no-numa} notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif notes_015 = Binaries compiled on a system with notes_020 = 2x Intel 2nd Generation Xeon Phi CPU notes_025 = + 96GB DDR4 memory using RedHat EL 7.2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" int=default=default=default: sw_compiler001 = C/C++: Version 16.0.2.181 of Intel C++ Studio XE sw_compiler002 = for Linux sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit sw_other001 = Microquill SmartHeap V10.2 default: %ifdef %{THP_enabled} notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_030 = Filesystem page cache cleared with: notes_035 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_040 = runspec command invoked through numactl i.e.: notes_045 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler000 = C/C++: Version 16.0.2.181 of Intel C++ Studio XE sw_compiler001 = for Linux; sw_compiler002 = Fortran: Version 16.0.2.181 of Intel Fortran sw_compiler003 = Studio XE for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other = None # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6914' default: notes_plat_sysinfo_000 = Sysinfo program /root/cpu2006-1.2/config/sysinfo.rev6914 notes_plat_sysinfo_005 = $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 notes_plat_sysinfo_010 = running on linux-z6tq Sun Feb 5 11:58:36 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon Phi(TM) CPU 7290 @ 1.50GHz notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 288 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 72 notes_plat_sysinfo_080 = siblings : 288 notes_plat_sysinfo_085 = physical 0: cores 0 1 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 notes_plat_sysinfo_090 = 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 notes_plat_sysinfo_095 = 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_100 = cache size : 1024 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 396132132 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = SuSE-release: notes_plat_sysinfo_145 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_150 = VERSION = 12 notes_plat_sysinfo_155 = PATCHLEVEL = 2 notes_plat_sysinfo_160 = # This file is deprecated and will be removed in a future service pack or notes_plat_sysinfo_165 = release. notes_plat_sysinfo_170 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_175 = os-release: notes_plat_sysinfo_180 = NAME="SLES" notes_plat_sysinfo_185 = VERSION="12-SP2" notes_plat_sysinfo_190 = VERSION_ID="12.2" notes_plat_sysinfo_195 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP2" notes_plat_sysinfo_200 = ID="sles" notes_plat_sysinfo_205 = ANSI_COLOR="0;32" notes_plat_sysinfo_210 = CPE_NAME="cpe:/o:suse:sles:12:sp2" notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = uname -a: notes_plat_sysinfo_225 = Linux linux-z6tq 4.4.16-56-default #1 SMP Mon Aug 8 14:24:26 UTC 2016 notes_plat_sysinfo_230 = (5b281a8) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = run-level 3 Feb 2 21:12 notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = SPEC is set to: /root/cpu2006-1.2 notes_plat_sysinfo_255 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_260 = /dev/sdb2 btrfs 930G 257G 669G 28% / notes_plat_sysinfo_265 = Additional information from dmidecode: notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_280 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_285 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_290 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = BIOS Dell Inc. 1.1.3 12/001/2016 notes_plat_sysinfo_305 = Memory: notes_plat_sysinfo_310 = 6x Hynix HMAA8GL7MMR4N-UH 64 GB 4 rank 2400 MHz notes_plat_sysinfo_315 = 8x INTEL N/A 2 GB 7200 MHz notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon Phi 7290 hw_disk = 1 x 1 TB 7.2K SATA hw_memory001 = 7200 MHz MCDRAM) hw_nchips = 1 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os000 = SUSE Linux Enterprise Server 12 SP2 (x86_64) sw_os001 = 4.4.16-56-default sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =LD_LIBRARY_PATH = "/root/cpu2006-1.2/libs/32:/root/cpu2006-1.2/libs/64:/root/cpu2006-1.2/sh" notes_010 =