# Invocation command line: # /spec/spec16/bin/runspec --define external --rate 80 -c cpu2006-1.2-ic16.0-lin64-ws-avx2-rate-20150812 --define smt --define cores=40 --define physicalfirst --define invoke_with_interleave --define drop_caches --define THP_enabled -o all int # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 16.0 # Operating system version: 64-Bit RedHat Enterprise Linux64 7.1 # Hardware: Intel processors supporting AVX2 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # 20150812 Intel Compiler 16.0 for Linux64 ############################################################################ action = validate tune = base,peak # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20150812 ext = cpu2006-1.2-ic16.0-lin64-ws-avx2-rate-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # ##################################################################################### # You can't change the line with fail_build=1 without changing the line ext= # to reflect the data on which you re-built the binaries. # In addition, the sw_compiler lines below, must be modified to match the description # of the compiler being used to build the binaries ##################################################################################### PATHSEP = / check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6914 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64.xml flagsurl001 = http://www.spec.org/cpu2006/flags/Huawei-Platform-Settings-BDW-V1.0.xml %ifdef %{default-platform-flags} flagsurl2=Default-Platform-Flags.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin OBJ = .o SMARTHEAP32_DIR = /sh SMARTHEAP64_DIR = /sh PORTABILITY = -D_FILE_OFFSET_BITS=64 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xCORE-AVX2 FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -opt-mem-layout-trans=3 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -opt-mem-layout-trans=3 fp=base=default=default: OPTIMIZE= $(FAST) -opt-prefetch COPTIMIZE= -auto-p32 -ansi-alias -opt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -ansi-alias -opt-mem-layout-trans=3 ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -ansi-alias -opt-mem-layout-trans=3 CXXOPTIMIZE= -ansi-alias -opt-mem-layout-trans=3 PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 COPTIMIZE= -auto-ilp32 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -opt-prefetch -auto-ilp32 -ansi-alias 403.gcc=peak=default: COPTIMIZE = $(FASTNOSTATIC) feedback=0 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 feedback=no 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use PASS1_FFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes feedback=0 435.gromacs=peak=default: OPTIMIZE= -opt-prefetch 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin OPTIMIZE= -opt-malloc-options=3 CXXOPTIMIZE= #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 3175 test_sponsor = Huawei hw_avail = Mar-2016 sw_avail = Mar-2016 tester = Huawei hw_cpu_name = Intel Trademarked CPU Name hw_cpu_char =Intel Turbo Boost Technology up to 3.60 GHz hw_cpu_mhz = 2200 hw_disk = 9999 GB SATA, 9999RPM hw_fpu = Integrated hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2400T-R) hw_model = Huawei CH222 V3 (Intel Xeon E5-2698 v4) hw_ncpuorder = 1,2 chip hw_ncores = 40 hw_nchips = 9999 hw_ncoresperchip = 20 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_vendor = Huawei prepared_by = sw_file = ReiserFS sw_os001 = RedHat EL 6.4 sw_state = Run level 3 (multi-user) notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %ifdef %{no-numa} notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif notes_015 = Binaries compiled on a system with 1x Intel Core i5-4670K CPU + 32GB notes_020 = memory using RedHat EL 7.1 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" int=default=default=default: sw_compiler000 = C/C++: Version 16.0.0.101 of Intel C++ Studio XE sw_compiler001 = for Linux sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit sw_other = Microquill SmartHeap V10.2 default: %ifdef %{THP_enabled} notes_025 = Transparent Huge Pages enabled with: notes_030 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_035 = Filesystem page cache cleared with: notes_040 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_045 = runspec command invoked through numactl i.e.: notes_050 = numactl --interleave=all runspec notes_055 = The Huawei CH121 V3 and Huawei CH222 V3 notes_060 = are electronically equivalent. notes_065 = The results have been measured on a Huawei CH121 V3 model %endif fp=default=default=default: sw_compiler001 = C/C++: Version 16.0.0.101 of Intel C++ Studio XE sw_compiler002 = for Linux; sw_compiler004 = Fortran: Version 16.0.0.101 of Intel Fortran sw_compiler005 = Studio XE for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6914' default: notes_plat_sysinfo_000 = Sysinfo program /spec/spec16/config/sysinfo.rev6914 notes_plat_sysinfo_005 = $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 notes_plat_sysinfo_010 = running on localhost.localdomain Wed Nov 19 04:59:00 2014 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 10 notes_plat_sysinfo_080 = siblings : 20 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 25600 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 263563248 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = From /etc/*release* /etc/*version* notes_plat_sysinfo_135 = os-release: notes_plat_sysinfo_140 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_145 = VERSION="7.0 (Maipo)" notes_plat_sysinfo_150 = ID="rhel" notes_plat_sysinfo_155 = ID_LIKE="fedora" notes_plat_sysinfo_160 = VERSION_ID="7.0" notes_plat_sysinfo_165 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.0 (Maipo)" notes_plat_sysinfo_170 = ANSI_COLOR="0;31" notes_plat_sysinfo_175 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.0:GA:server" notes_plat_sysinfo_180 = redhat-release: Red Hat Enterprise Linux Server release 7.0 (Maipo) notes_plat_sysinfo_185 = system-release: Red Hat Enterprise Linux Server release 7.0 (Maipo) notes_plat_sysinfo_190 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.0:ga:server notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = uname -a: notes_plat_sysinfo_205 = Linux localhost.localdomain 3.10.0-123.el7.x86_64 #1 SMP Mon May 5 11:16:57 notes_plat_sysinfo_210 = EDT 2014 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = run-level 3 Nov 19 02:47 notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = SPEC is set to: /spec/spec16 notes_plat_sysinfo_235 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_240 = /dev/sda2 xfs 549G 14G 536G 3% / notes_plat_sysinfo_245 = Additional information from dmidecode: notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_260 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_265 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_270 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = BIOS Insyde Corp. 3.09 02/22/2016 notes_plat_sysinfo_285 = Memory: notes_plat_sysinfo_290 = 8x NO DIMM NO DIMM 3 rank notes_plat_sysinfo_295 = 8x Samsung M393A2G40EB1-CRC 16 GB 1 rank 2400 MHz notes_plat_sysinfo_300 = 8x Samsung M393A2G40EB1-CRC 16 GB 2 rank 2400 MHz notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2698 v4 hw_disk = 1 x 600GB SAS, 10000 RPM hw_nchips = 2 prepared_by = Huawei sw_file = xfs sw_os000 = Red Hat Enterprise Linux Server release 7.0 sw_os001 = (Maipo) sw_os002 = 3.10.0-123.el7.x86_64 sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =LD_LIBRARY_PATH = "/spec/spec16/libs/32:/spec/spec16/libs/64:/spec/spec16/sh" notes_010 = notes_plat_form_000 = BIOS configuration: notes_plat_form_005 = Set Power Efficiency Mode to Performance notes_plat_form_010 = Set Snoop Mode to COD mode notes_plat_form_015 = Set Patrol Scrub to Disable nc000 = SPEC has determined that this result is not in compliance with the SPEC nc001 = CPU2006 run and reporting rules. Specifically, the memory was not nc002 = available as required by SPEC CPU rule 1.3.2 and the SPEC nc003 = Open Systems Group policy on general availability.