SPEC Seal of Reviewal CINT2000 Result
Copyright © 1999-2004 Standard Performance Evaluation Corporation
Fujitsu Siemens Computers
CELSIUS V810 (Opteron 248 2.2 GHz, SuSE 9.0 for AMD64)
SPECint_rate2000 = 29.9  
SPECint_rate_base2000 = 27.1  
SPEC license # 22 Tested by: Fujitsu Siemens Computers Test date: Feb-2004 Hardware Avail: Dec-2003 Software Avail: Nov-2003
Graph Scale Benchmark Base
Copies
Base
Runtime
Base
Ratio
Copies Runtime Ratio
164.gzip base result bar (26.9)
164.gzip peak result bar (27.2)
164.gzip 2 121    26.9   2 119    27.2  
175.vpr base result bar (22.4)
175.vpr peak result bar (22.7)
175.vpr 2 145    22.4   2 143    22.7  
176.gcc base result bar (34.7)
176.gcc peak result bar (34.7)
176.gcc 2 73.5  34.7   2 73.5  34.7  
181.mcf base result bar (9.10)
181.mcf peak result bar (15.5)
181.mcf 2 459    9.10  2 270    15.5  
186.crafty base result bar (44.2)
186.crafty peak result bar (44.0)
186.crafty 2 52.5  44.2   2 52.7  44.0  
197.parser base result bar (23.6)
197.parser peak result bar (24.5)
197.parser 2 177    23.6   2 170    24.5  
252.eon base result bar (43.3)
252.eon peak result bar (46.9)
252.eon 2 69.6  43.3   2 64.3  46.9  
253.perlbmk base result bar (34.8)
253.perlbmk peak result bar (34.8)
253.perlbmk 2 120    34.8   2 120    34.8  
254.gap base result bar (26.5)
254.gap peak result bar (26.5)
254.gap 2 96.2  26.5   2 96.2  26.5  
255.vortex base result bar (36.4)
255.vortex peak result bar (40.7)
255.vortex 2 121    36.4   2 108    40.7  
256.bzip2 base result bar (26.2)
256.bzip2 peak result bar (26.2)
256.bzip2 2 133    26.2   2 133    26.2  
300.twolf base result bar (21.3)
300.twolf peak result bar (30.5)
300.twolf 2 327    21.3   2 228    30.5  
  SPECint_rate_base2000 27.1    
  SPECint_rate2000 29.9  

Hardware
Hardware Vendor: Fujitsu Siemens Computers
Model Name: CELSIUS V810 (Opteron 248 2.2 GHz, SuSE 9.0 for AMD64)
CPU: AMD Opteron (TM) 248
CPU MHz: 2200
FPU: Integrated
CPU(s) enabled: 2 cores, 2 chips, 1 core/chip
CPU(s) orderable: 1,2
Parallel: No
Primary Cache: 64KBI + 64KBD on chip
Secondary Cache: 1024KB(I+D) on chip
L3 Cache: N/A
Other Cache: --
Memory: 8 x 1 GB PC2700 DDR SDRAM, ECC Registered
Disk Subsystem: Maxtor 6Y160M0
Other Hardware: None
Software
Operating System: SuSE Linux 9.0 (AMD64) 2.4.21-193-default
Compiler: SuSE gcc 3.3.1 compiler (from SuSE Linux 9.0)
File System: Linux/reiserfs
System State: Multi-user SuSE Run level 3
Notes / Tuning Information
  +FDO: PASS1=-fprofile-arcs PASS2=-fbranch-probabilities
  Portability:
                PORTABILITY=-DSPEC_CPU2000_LP64 is applied to all benchmarks,
                except for peak runs of 181.mcf, 197.parser and 300.twolf, which
                are compiled for 32-bit in peak.
   186.crafty:  CPORTABILITY=-DLINUX_i386
   176.gcc:     Approved src.alt is used.
   252.eon:     CXXPORTABILITY=-DHAS_ERRLIST -DFMAX_IS_DOUBLE
                Approved src.alt is used.
   253.perlbmk: CPORTABILITY=-DSPEC_CPU2000_LINUX_I386 -DSPEC_CPU2000_NEED_BOOL
                             -DSPEC_CPU2000_GLIBC22
   254.gap:     CPORTABILITY=-DSYS_IS_USG -DSYS_HAS_IOCTL_PROTO -DSYS_HAS_TIME_PROTO
                             -DSYS_HAS_SIGNAL_PROTO -DSYS_HAS_ANSI -DSYS_HAS_CALLOC_PROTO
  Baseline C:      gcc -O3 -funroll-all-loops +FDO 
  Baseline C++:    g++ -O3 -funroll-all-loops +FDO
  Peak tuning:
   gzip:    -O3 -funroll-all-loops -finline-limit=900 -freduce-all-givs +FDO
   vpr:     -O3 -funroll-loops -finline-limit=1000 +FDO
   gcc:     basepeak=true
   mcf:     -O3 -funroll-all-loops -m32 +FDO
   crafty:  -O3 -funroll-loops -fprefetch-loop-arrays
   parser:  -O3 -funroll-all-loops -m32 +FDO
   eon:     -O3 -funroll-all-loops -ffast-math -finline-limit=3000 +FDO
   perlbmk: basepeak=true
   gap:     basepeak=true
   vortex:  -O3 -funroll-all-loops -finline-limit=1000 +FDO
   bzip2:   -O3 -funroll-all-loops -freduce-all-givs -finline-limit=2700 +FDO
   twolf:   -O3 -funroll-all-loops -finline-limit=2000 -m32 +FDO
  ONESTEP is used for all base and peak runs
  
  BIOS default settings have been used. These include:
  ECC memory checking disabled,
  node memory interleave disabled, SRAT enabled
  For information about Fujitsu Siemens Computers in your country
  please see: 
  http://www.fujitsu-siemens.com/countries
  


For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2004 Standard Performance Evaluation Corporation

First published at SPEC.org on 09-Mar-2004

Generated on Fri Mar 25 15:41:10 2005 by SPEC CPU2000 HTML formatter v1.01