SPEC CINT2000 Summary Fujitsu Siemens Computers CELSIUS V810 (Opteron 248 2.2 GHz, SuSE 9.0 for AMD64) Fri Feb 20 07:24:30 2004 SPEC License #22 Test date: Feb-2004 Hardware availability: Dec-2003 Tester: Fujitsu Siemens Computers Software availability: Nov-2003 Base Base Base Peak Peak Peak Benchmarks # Copies Run Time Rate # Copies Run Time Rate ------------ -------- -------- -------- -------- -------- -------- 164.gzip 2 121 26.8 2 120 27.2 164.gzip 2 121 26.9 2 119 27.2* 164.gzip 2 121 26.9 * 2 119 27.3 175.vpr 2 145 22.4 * 2 144 22.5 175.vpr 2 146 22.3 2 143 22.7* 175.vpr 2 144 22.6 2 133 24.5 176.gcc 2 74.4 34.3 2 74.4 34.3 176.gcc 2 73.2 34.8 2 73.2 34.8 176.gcc 2 73.5 34.7 * 2 73.5 34.7* 181.mcf 2 462 9.04 2 262 15.9 181.mcf 2 295 14.1 2 270 15.4 181.mcf 2 459 9.10* 2 270 15.5* 186.crafty 2 52.5 44.2 2 52.2 44.4 186.crafty 2 52.5 44.2 * 2 52.7 44.0* 186.crafty 2 52.4 44.3 2 52.9 43.9 197.parser 2 177 23.6 2 170 24.5 197.parser 2 177 23.5 2 170 24.5* 197.parser 2 177 23.6 * 2 170 24.6 252.eon 2 70.0 43.1 2 64.2 47.0 252.eon 2 69.5 43.4 2 64.3 46.9* 252.eon 2 69.6 43.3 * 2 64.3 46.9 253.perlbmk 2 120 34.7 2 120 34.7 253.perlbmk 2 120 34.8 * 2 120 34.8* 253.perlbmk 2 120 34.8 2 120 34.8 254.gap 2 96.2 26.5 2 96.2 26.5 254.gap 2 96.2 26.5 * 2 96.2 26.5* 254.gap 2 96.3 26.5 2 96.3 26.5 255.vortex 2 121 36.4 * 2 109 40.4 255.vortex 2 121 36.4 2 108 40.7 255.vortex 2 121 36.3 2 108 40.7* 256.bzip2 2 133 26.2 * 2 132 26.3 256.bzip2 2 131 26.6 2 133 26.2 256.bzip2 2 134 26.0 2 133 26.2* 300.twolf 2 331 21.1 2 231 30.2 300.twolf 2 312 22.3 2 227 30.7 300.twolf 2 327 21.3 * 2 228 30.5* ======================================================================== 164.gzip 2 121 26.9 * 2 119 27.2* 175.vpr 2 145 22.4 * 2 143 22.7* 176.gcc 2 73.5 34.7 * 2 73.5 34.7* 181.mcf 2 459 9.10* 2 270 15.5* 186.crafty 2 52.5 44.2 * 2 52.7 44.0* 197.parser 2 177 23.6 * 2 170 24.5* 252.eon 2 69.6 43.3 * 2 64.3 46.9* 253.perlbmk 2 120 34.8 * 2 120 34.8* 254.gap 2 96.2 26.5 * 2 96.2 26.5* 255.vortex 2 121 36.4 * 2 108 40.7* 256.bzip2 2 133 26.2 * 2 133 26.2* 300.twolf 2 327 21.3 * 2 228 30.5* SPECint_rate_base2000 27.1 SPECint_rate2000 29.9 HARDWARE -------- Hardware Vendor: Fujitsu Siemens Computers Model Name: CELSIUS V810 (Opteron 248 2.2 GHz, SuSE 9.0 for AMD64) CPU: AMD Opteron (TM) 248 CPU MHz: 2200 FPU: Integrated CPU(s) enabled: 2 cores, 2 chips, 1 core/chip CPU(s) orderable: 1,2 Parallel: No Primary Cache: 64KBI + 64KBD on chip Secondary Cache: 1024KB(I+D) on chip L3 Cache: N/A Other Cache: -- Memory: 8 x 1 GB PC2700 DDR SDRAM, ECC Registered Disk Subsystem: Maxtor 6Y160M0 Other Hardware: None SOFTWARE -------- Operating System: SuSE Linux 9.0 (AMD64) 2.4.21-193-default Compiler: SuSE gcc 3.3.1 compiler (from SuSE Linux 9.0) File System: Linux/reiserfs System State: Multi-user SuSE Run level 3 NOTES ----- +FDO: PASS1=-fprofile-arcs PASS2=-fbranch-probabilities Portability: PORTABILITY=-DSPEC_CPU2000_LP64 is applied to all benchmarks, except for peak runs of 181.mcf, 197.parser and 300.twolf, which are compiled for 32-bit in peak. 186.crafty: CPORTABILITY=-DLINUX_i386 176.gcc: Approved src.alt is used. 252.eon: CXXPORTABILITY=-DHAS_ERRLIST -DFMAX_IS_DOUBLE Approved src.alt is used. 253.perlbmk: CPORTABILITY=-DSPEC_CPU2000_LINUX_I386 -DSPEC_CPU2000_NEED_BOOL -DSPEC_CPU2000_GLIBC22 254.gap: CPORTABILITY=-DSYS_IS_USG -DSYS_HAS_IOCTL_PROTO -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO -DSYS_HAS_ANSI -DSYS_HAS_CALLOC_PROTO Baseline C: gcc -O3 -funroll-all-loops +FDO Baseline C++: g++ -O3 -funroll-all-loops +FDO Peak tuning: gzip: -O3 -funroll-all-loops -finline-limit=900 -freduce-all-givs +FDO vpr: -O3 -funroll-loops -finline-limit=1000 +FDO gcc: basepeak=true mcf: -O3 -funroll-all-loops -m32 +FDO crafty: -O3 -funroll-loops -fprefetch-loop-arrays parser: -O3 -funroll-all-loops -m32 +FDO eon: -O3 -funroll-all-loops -ffast-math -finline-limit=3000 +FDO perlbmk: basepeak=true gap: basepeak=true vortex: -O3 -funroll-all-loops -finline-limit=1000 +FDO bzip2: -O3 -funroll-all-loops -freduce-all-givs -finline-limit=2700 +FDO twolf: -O3 -funroll-all-loops -finline-limit=2000 -m32 +FDO ONESTEP is used for all base and peak runs BIOS default settings have been used. These include: ECC memory checking disabled, node memory interleave disabled, SRAT enabled For information about Fujitsu Siemens Computers in your country please see: http://www.fujitsu-siemens.com/countries ----------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 1999-2004 Standard Performance Evaluation Corporation Generated on Fri Mar 25 15:41:10 2005 by SPEC CPU2000 ASCII formatter v2.1