SPEC CINT2000 Summary Fujitsu Siemens Computers CELSIUS V810 (Opteron 248 2.2 GHz SuSE 9.0 for AMD64) Fri Nov 8 15:39:42 2002 SPEC License #22 Test date: Feb-2004 Hardware availability: Dec-2003 Tester: Fujitsu Siemens Computers Software availability: Nov-2003 Base Base Base Peak Peak Peak Benchmarks # Copies Run Time Rate # Copies Run Time Rate ------------ -------- -------- -------- -------- -------- -------- 164.gzip 1 123 13.2 * 1 119 13.7 164.gzip 1 123 13.2 1 119 13.7* 164.gzip 1 123 13.2 1 119 13.7 175.vpr 1 132 12.3 1 131 12.4 175.vpr 1 132 12.3 * 1 132 12.3 175.vpr 1 132 12.3 1 132 12.3* 176.gcc 1 72.5 17.6 1 72.5 17.6 176.gcc 1 72.7 17.6 * 1 72.7 17.6* 176.gcc 1 73.0 17.5 1 73.0 17.5 181.mcf 1 285 7.34 1 181 11.6 181.mcf 1 286 7.31 1 182 11.5* 181.mcf 1 285 7.32* 1 183 11.4 186.crafty 1 53.2 21.8 * 1 52.6 22.1* 186.crafty 1 53.1 21.8 1 52.4 22.1 186.crafty 1 53.2 21.8 1 52.7 22.0 197.parser 1 175 11.9 1 170 12.3 197.parser 1 175 11.9 1 170 12.3* 197.parser 1 175 11.9 * 1 170 12.3 252.eon 1 70.8 21.3 * 1 64.4 23.4 252.eon 1 70.9 21.3 1 64.4 23.4* 252.eon 1 70.7 21.3 1 64.4 23.4 253.perlbmk 1 119 17.5 1 119 17.5 253.perlbmk 1 119 17.5 * 1 119 17.5* 253.perlbmk 1 119 17.5 1 119 17.5 254.gap 1 92.4 13.8 1 92.4 13.8 254.gap 1 91.6 13.9 1 91.6 13.9 254.gap 1 91.7 13.9 * 1 91.7 13.9* 255.vortex 1 121 18.2 1 108 20.4 255.vortex 1 121 18.2 1 108 20.3* 255.vortex 1 121 18.2 * 1 108 20.3 256.bzip2 1 131 13.3 1 130 13.4 256.bzip2 1 131 13.3 1 130 13.4 256.bzip2 1 131 13.3 * 1 130 13.4* 300.twolf 1 288 12.1 1 228 15.3 300.twolf 1 286 12.2 1 219 15.9 300.twolf 1 287 12.1 * 1 224 15.5* ======================================================================== 164.gzip 1 123 13.2 * 1 119 13.7* 175.vpr 1 132 12.3 * 1 132 12.3* 176.gcc 1 72.7 17.6 * 1 72.7 17.6* 181.mcf 1 285 7.32* 1 182 11.5* 186.crafty 1 53.2 21.8 * 1 52.6 22.1* 197.parser 1 175 11.9 * 1 170 12.3* 252.eon 1 70.8 21.3 * 1 64.4 23.4* 253.perlbmk 1 119 17.5 * 1 119 17.5* 254.gap 1 91.7 13.9 * 1 91.7 13.9* 255.vortex 1 121 18.2 * 1 108 20.3* 256.bzip2 1 131 13.3 * 1 130 13.4* 300.twolf 1 287 12.1 * 1 224 15.5* SPECint_rate_base2000 14.4 SPECint_rate2000 15.7 HARDWARE -------- Hardware Vendor: Fujitsu Siemens Computers Model Name: CELSIUS V810 (Opteron 248 2.2 GHz SuSE 9.0 for AMD64) CPU: AMD Opteron (TM) 248 CPU MHz: 2200 FPU: Integrated CPU(s) enabled: 1 core, 1 chip, 1 core/chip CPU(s) orderable: 1,2 Parallel: No Primary Cache: 64KBI + 64KBD on chip Secondary Cache: 1024KB(I+D) on chip L3 Cache: N/A Other Cache: -- Memory: 4 x 1 GB PC2700 DDR SDRAM, ECC Registered Disk Subsystem: Maxtor ST020H2 Other Hardware: None SOFTWARE -------- Operating System: SuSE Linux 9.0 (AMD64) 2.4.21-193-default Compiler: SuSE gcc 3.3.1 compiler (from SuSE Linux 9.0) File System: Linux/reiserfs System State: Multi-user SuSE Run level 3 NOTES ----- +FDO: PASS1=-fprofile-arcs PASS2=-fbranch-probabilities Portability: PORTABILITY=-DSPEC_CPU2000_LP64 is applied to all benchmarks, except for peak runs of 181.mcf, 197.parser and 300.twolf, which are compiled for 32-bit in peak. 186.crafty: CPORTABILITY=-DLINUX_i386 176.gcc: Approved src.alt is used. 252.eon: CXXPORTABILITY=-DHAS_ERRLIST -DFMAX_IS_DOUBLE Approved src.alt is used. 253.perlbmk: CPORTABILITY=-DSPEC_CPU2000_LINUX_I386 -DSPEC_CPU2000_NEED_BOOL -DSPEC_CPU2000_GLIBC22 254.gap: CPORTABILITY=-DSYS_IS_USG -DSYS_HAS_IOCTL_PROTO -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO -DSYS_HAS_ANSI -DSYS_HAS_CALLOC_PROTO Baseline C: gcc -O3 -funroll-all-loops +FDO Baseline C++: g++ -O3 -funroll-all-loops +FDO Peak tuning: gzip: -O3 -funroll-all-loops -finline-limit=900 -freduce-all-givs +FDO vpr: -O3 -funroll-loops -finline-limit=1000 +FDO gcc: basepeak=true mcf: -O3 -funroll-all-loops -m32 +FDO crafty: -O3 -funroll-loops -fprefetch-loop-arrays parser: -O3 -funroll-all-loops -m32 +FDO eon: -O3 -funroll-all-loops -ffast-math -finline-limit=3000 +FDO perlbmk: basepeak=true gap: basepeak=true vortex: -O3 -funroll-all-loops -finline-limit=1000 +FDO bzip2: -O3 -funroll-all-loops -freduce-all-givs -finline-limit=2700 +FDO twolf: -O3 -funroll-all-loops -finline-limit=2000 -m32 +FDO ONESTEP is used for all base and peak runs System tested with only one CPU present BIOS default settings have been used. These include: ECC memory checking disabled, memory node interleave disabled, SRAT enabled. For information about Fujitsu Siemens Computers in your country please see: http://www.fujitsu-siemens.com/countries ----------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 1999-2004 Standard Performance Evaluation Corporation Generated on Fri Mar 25 15:41:08 2005 by SPEC CPU2000 ASCII formatter v2.1