# Invocation command line:
# /part0/spec/cpu2000v1.20/bin/runspec -c fp_pacu_19.cfg --reportable --deletework -r -u 64 -n 3 fp
############################################################################
ext=pacu_19
action=validate
tune=base,peak
input=ref
teeout=yes
feedback=1
output_format=asc
makeflags   = -j1

#include: sut.inc
# ---- Begin inclusion of '/part0/spec/cpu2000v1.20/config/sut.inc'
####################################################
#
#  Document the configuration being
#  tested.  If it affects performance, it needs
#  to be described here.
#
####################################################

test_date=Jun-2002
prepared_by=Kirby Collins <kcollins@rsn.hp.com>

# hardware description
#
# dates should be of the form Mmm-yyyy
# hw_cpu_mhz should be an integer (don't add MHz)
# hw_model and machine_name should be the same

hw_avail=Jul-2002
hw_model=HP Superdome 64-way (875MHz PA-8700)
machine_name=HP Superdome 64-way (875MHz PA-8700)
hw_cpu=PA-8700
hw_cpu_mhz=875
hw_pcache=0.75MB(I) + 1.5MB(D) on chip
hw_scache=None
hw_tcache=None
hw_ocache=None
hw_fpu=Integrated

hw_ncpu=64
hw_ncpuorder=8 to 64
hw_parallel=No
hw_memory=256GB (512x512MB DIMMs total)
hw_disk=5x9 GB Fibrechannel

# operating system section
# this should document the software used for the run.
# the compiler revision notes are in the main .cfg file along
# with the options.
#
# note that the sw_avail date should be the date when
# all the software components, including compilers,
# are available

sw_os=HP-UX 11i TCOE B.11.11.0206.5
sw_file=OnLine JFS
sw_state=Single-user
sw_avail=Jun-2002

# special notes
# this should include any special notes on the hardware configuration,
# software configuration, etc.

notes900    =
notes901    = Hardware configuration notes:
notes902    =
notes903    =   System was configured as a single partition with 4 cells
notes904    =   firmware tunable DataPrefetch enabled
notes905    =

notes950    = Operating system configuration notes:
notes951    =
notes952    =   PHKL_25778 LVM cumulative patch
notes953    =   PHKL_25886 Filesystem buffercache performance fix
notes954    =   PHKL_26230 VxFS cumulative patch
notes955    =
notes956    =   vps_pagesize 4096, vps_ceiling 16384 
notes957    =   dbc_min_pct=10, dbc_max_pct=10
notes958    =   maxssiz=0x10000000
notes959    =
notes960    =   filesystem used for spec runs mounted tmplog,mincache=tmpcache
notes961    =

# ---- End inclusion of '/part0/spec/cpu2000v1.20/config/sut.inc'

# vendor stuff (this shouldn't change often, if ever)

hw_vendor=Hewlett Packard Corporation
company_name=Hewlett Packard Corporation
license_num=3
tester_name=HP

############################################
#
#  compiler revision notes
#
#  be sure to document compiler availability
#  date in system.inc include file (if later
#  than the OS availability)
#
############################################
sw_compiler000=HP ANSI C 11.11.04
sw_compiler001=Fortran90 11.11.42
sw_compiler002=PHCO_24402 libc cumulative header file patch
sw_compiler003=PHCO_26124 libc cumulative patch
sw_compiler004=PHSS_24207 libm patch     
sw_compiler005=PHSS_25716 shared libF90 B.11.01.12
sw_compiler006=PHSS_25719 libCL patch
sw_compiler007=PHSS_26263 ld(1) and linker tools cumulative patch 
sw_compiler008=PHSS_26264 linker startup code/SSLIC ELF support
sw_compiler009=PHSS_26792 Ansi C compiler cumulative patch
sw_compiler010=PHSS_26793 +O4/PBO optimizer cumulative patch
sw_compiler011=PHSS_27072 Fortran90 B.11.01.53 patch

########end of header section################

########################################################################
# Benchmark specific portability flags.                                #
######################################################################## 

notes100 =
notes101 =  Portability flags:
178.galgel=default=default=default:
notes102 =   178.galgel: +source=fixed
FPORTABILITY           = +source=fixed

#####################################################################
# compilers and options for BASE
#####################################################################

default=base=default=default:
FC                   = /opt/fortran90/bin/f90
CC                   = /opt/ansic/bin/cc

notes200  = 
notes201  = Baseline compile flags:

FOPTIMIZE =            +Ofaster -Wl,-a,archive 
notes210  =   fortran: +Ofaster -Wl,-a,archive 

PASS1_CFLAGS         = +I
PASS1_LDCFLAGS       = $(PASS1_CFLAGS)
PASS2_CFLAGS         =    +P
PASS2_LDCFLAGS       = $(PASS2_CFLAGS)
COPTIMIZE            =       +O4 +Odataprefetch -Wl,-a,archive
notes220  =   C      : +I/+P +O4 +Odataprefetch -Wl,-a,archive
notes230  = 

#####################################################################
# compilers for PEAK (options are in benchmark specific sections) 
#####################################################################

default=peak=default=default:
CC                   = /opt/ansic/bin/cc 
FC                   = /opt/fortran90/bin/f90
F77                  = /opt/fortran90/bin/f90

notes300 = 
notes301 = Peak compile flags:

168.wupwise=peak=default=default:
ONESTEP = true
F77OPTIMIZE             =           +cat +O3 +Odataprefetch +Onofltacc -Wl,+FPD -Wl,-a,archive
notes310 =   168.wupwise: (ONESTEP) +cat +O3 +Odataprefetch +Onofltacc 
notes311                                              =                -Wl,+FPD -Wl,-a,archive

171.swim=peak=default=default:
basepeak=true
notes320 =      171.swim: basepeak=true

172.mgrid=peak=default=default:
basepeak=true
notes330 =     172.mgrid: basepeak=true

173.applu=peak=default=default:
basepeak=true
notes340 =     173.applu: basepeak=true

177.mesa=peak=default=default:
basepeak=true
notes350 =      177.mesa: basepeak=true

178.galgel=peak=default=default:
FOPTIMIZE               = +Ofaster +Oloop_unroll=6 -Wl,-a,archive
notes360 =    178.galgel: +Ofaster +Oloop_unroll=6 -Wl,-a,archive

179.art=peak=default=default:
PASS1_CFLAGS        = +I
PASS1_LDCFLAGS      = $(PASS1_CFLAGS)
PASS2_CFLAGS        =    +P
PASS2_LDCFLAGS      =    $(PASS2_CFLAGS)
COPTIMIZE           =           +Oall +Onodataprefetch +Onofltacc +Optrs_strongly_typed +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive
notes370 =       179.art: +I/+P +Oall +Onodataprefetch +Onofltacc +Optrs_strongly_typed
notes371                                                               =                +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive

183.equake=peak=default=default:
COPTIMIZE               = +O4 +Olibcalls +Odataprefetch +Optrs_strongly_typed +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive
notes380 =    183.equake: +O4 +Olibcalls +Odataprefetch +Optrs_strongly_typed
notes381                                                     =                +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive


187.facerec=peak=default=default:
ONESTEP = true
FOPTIMIZE =                         +cat +O3 +Ofastaccess -Wl,+FPD -Wl,-a,archive
notes390 =   187.facerec: (ONESTEP) +cat +O3 +Ofastaccess -Wl,+FPD -Wl,-a,archive

188.ammp=peak=default=default:
PASS1_CFLAGS            = +I
PASS1_LDCFLAGS          = $(PASS1_CFLAGS)
PASS2_CFLAGS            =    +P
PASS2_LDCFLAGS          =    $(PASS2_CFLAGS)
COPTIMIZE               =       +Oall +Odataprefetch +Optrs_strongly_typed +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive
notes400 =      188.ammp: +I/+P +Oall +Odataprefetch +Optrs_strongly_typed
notes401                                                  =                +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive

189.lucas=peak=default=default:
basepeak=true
notes410 =     189.lucas: basepeak=true

191.fma3d=peak=default=default:
basepeak=true
notes420 =     191.fma3d: basepeak=true

200.sixtrack=peak=default=default:
ONESTEP = true
F77OPTIMIZE             =           +cat +O3 +Onolibcalls +Onolimit +Onoinline +Onodataprefetch -Wl,+FPD -Wl,-a,archive
notes430 =  200.sixtrack: (ONESTEP) +cat +O3 +Onolibcalls +Onolimit +Onoinline 
notes431                                                      =                +Onodataprefetch -Wl,+FPD -Wl,-a,archive

301.apsi=peak=default=default:
basepeak=true
notes440 =      301.apsi: basepeak=true