# Invocation command line: # /cpu2k/bin/runspec -c cpu2k.pulsar.c50.f71.cfg -r -u 8 all ############################################################################ ################################################################################ # SPEC CPU2000 Benchmark Config file IBM RS/6000 AIX # Last Changed: 2.04.00 ################################################################################ #=============================================================================== # Global Options apply to all runs #=============================================================================== VENDOR = ibm action = validate tune = all output_format = asc runout = yes teeout = yes ext =pulsar.c50.f71 basepeak=0 #--number of times each test will be run (reportable must be and odd num >= 3) iterations = 3 mean_anyway = 1 #--turn on both of the following for reportable (non-test) runs reportable = 1 check_md5 = 1 #--prevent log file lines that are too long for vi log_line_width = 156 #--the directory where pdf data will go, be sure to tell the compiler #---where this is (eg: export PDFDIR="/tmp/pdfdir" for IBM compilers) PDFDIR=/tmp/mericas/pdfdir5 #=============================================================================== # The information below is for silverstar.spec.perform #=============================================================================== company_name = IBM Corporation machine_name = RS/6000 7026-H80 (1 CPU) hw_vendor = IBM Corporation hw_model = RS/6000 7026-H80 (1 CPU) hw_cpu = IBM PowerPC RS64-III hw_cpu_mhz = 500MHz hw_fpu = Integrated hw_ncpu = 1 hw_ncpuorder = 1,2,4,6 hw_pcache = 128KBI+128KBD (on chip) hw_scache = 4MB (I+D) (off chip) hw_tcache = None hw_ocache = None hw_parallel = No hw_memory = 512KB hw_disk = 1x4.5GB LVD SCSI, 1x9.1GB SSA hw_other = None hw_avail = May-00 sw_os = AIX 4.3.3 sw_file = AIX/JFS sw_state = Multi-user sw_avail = May-00 license_num = 11 tester_name = IBM, Austin, TX test_date = Apr-2000 #--------------------------------- # Floating point specific notes #--------------------------------- fp=default=default=default: sw_compiler01 = IBM XL Fortran 7.1.0 sw_compiler02 = IBM C 5.0.1 notes001 = Portability Flags notes002 = -qfixed used in: wupwise, swim, mgrid, applu, galgel, sixtrack, apsi notes003 = -qsuffix=f=f90 used in: galgel, facerec, lucas, fma3d notes004 = Base Flags: notes005 = Fortran: -O5 -lmass notes006 = C: -O5 -lmass notes007 = Peak Flags: notes008 = 168.wupwise: -qpdf1/pdf2 -O4 -qipa=level=2 -lmass, fdpr -v -R3 notes009 = 171.swim: -qpdf1/pdf2 -O4 -qipa=level=2 -lmass -qhot, fdpr -v -R3 notes010 = 172.mgrid: -O4 -qarch=pwr3 notes011 = 173.applu: -O3 notes012 = 177.mesa: -O3 -qarch=ppc,fdpr -v -R3 notes013 = 178.mesa: -O4 -qipa=level=2 -qhot -lmass, fdpr -v -R3 notes014 = 179.art: -O5 -lmass notes015 = 183.equake: -O5 -lmass -lhmu notes016 = 187.facerec: -O5 -lmass notes017 = 188.ammp: -O3 -lmass notes018 = 189.lucus: -qpdf1/pdf2 -O3 -qarch=rs64b -lmass,fdpr -v -R3 notes019 = 191.fma3d: -O3 -lmass notes020 = 200.sixtrack:-O5 -lmass notes021 = 301.apsi: -O5 -lmass #--------------------------------- # Integer specific notes #--------------------------------- int=default=default=default: sw_compiler01 = C: IBM VAC 5.0.1 invoked as "cc" except where noted as "xlc" sw_compiler02 = C++: IBM C++ 3.6.6.1 invoked as "xlC" notes001 = Portability Flags: notes002 = gcc: -ma -qlanglvl=ansi -DHOST_WORDS_BIG_ENDIAN notes003 = crafty: -DAIX notes004 = eon: -DNEED_EXPLICIT_SPECIALIZATION notes005 = perlbmk: -DSPEC_CPU2000_AIX notes006 = gap: -DSYS_IS_BSD -DSYS_STRING_H -DSYS_HAS_TIME_PROTO -DSYS_HAS_MALLOC_PROTO -DSYS_HAS_CALLOC_PROTO notes007 = twolf: -DHAVE_SIGNED_CHAR notes008 = Base Flags: notes009 = C: -qpdf1/pdf2 -O3 -qarch=rs64b -lhmu notes010 = C++: -qpdf1/pdf2 -O3 qarch=ppc qtune=rs64b notes011 = Peak Flags: notes012 = 164.gzip: CC=xlc, -qpdf1/pdf2 -05 -qarch=ppc, fdpr -v -R3 notes013 = 175.vpr: CC=xlc, -qpdf1/pdf2 -03 -qarch=rs64b -Q=500 -bnso -I:/lib/syscalls.exp, fdpr -v -R3 notes014 = 176.gcc: -qpdf1/pdf2 -03 -qarch=pwr3 -lhmu, fdpr -v -R3 notes015 = 181.mcf: -04 notes016 = 186.crafty: -O4 -qarch=rs64b, fdpr -v -R3 notes017 = 197.parser: CC=xlc,-O4 -qarch=rs64b -bnso -I:/lib/syscalls.exp, fdpr -v -R3 notes018 = 252.eon: -qpdf1/pdf2 -03 -qarch=ppc -qtune=pwr3 -lhmu, fdpr -v -R3 notes019 = 253.perlbmk:-qpdf1/pdf2 -03 -qarch=rs64b -qdatalocal -qunroll=8 -lhmu, fdpr -v -R3 notes020 = 254.gap: -04 , fdpr -v -R3 notes021 = 255.vortex: -qpdf1/pdf2 -05 -Q=500 -lhmu, fdpr -v -R3 notes022 = 256.bzip2: -04 -qarch=rs64b, fdpr -v -R3 notes023 = 300.twolf: CC=xlc,-O5 , fdpr -v -R3 ################################################################################ ################################################################################ ###### ###### ###### DO NOT EDIT BELOW THIS BLOCK ###### ###### (unless you are prepared to build new binaries) ###### ###### ###### ################################################################################ ################################################################################ #=============================================================================== # How the compilers are called # The settings used here are for IBM C/C++ and xl Fortran compilers #=============================================================================== fp=default=default=default: CC = /usr/vac/bin/xlc FC = xlf90 F77 = xlf90 int=default=default=default: CC = /usr/vac/bin/cc CXX = /usr/ibmcxx/bin/xlC #=============================================================================== # Base Level Optimizations # Limited to 4 flags #=============================================================================== #------------------------ # Floating Point #------------------------ fp=base=default=default: FOPTIMIZE =-O5 -lmass #--use feedback with fortran fp progs #fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} #PASS1_FFLAGS =-qpdf1 -O3 -qarch=rs64b #PASS1_LDFFLAGS =-lmass -L/usr/lpp/xlf/lib/pdf -lpdf #PASS2_FFLAGS =-qpdf2 -O3 -qarch=rs64b #PASS2_LDFFLAGS =-lmass #--no feedback for C programs COPTIMIZE =-O5 -lmass #--if you are using feedback with base fortran progs, you have to #--explicitly turn off feedback for C language fp programs #177.mesa=base=default=default: #fdo_pre0 = #179.art=base=default=default: #fdo_pre0 = #183.equake=base=default=default: #fdo_pre0 = #188.ammp=base=default=default: #fdo_pre0 = #------------------------ # Integer #------------------------ int=base=default=default: #--C flags no feedback COPTIMIZE =-O4 -lhmu #--C++ flags w/feedback PASS1_CXXFLAGS =-qpdf1 -O3 -qarch=ppc -qtune=rs64b PASS1_LDCXXFLAGS =-lpdf -L/usr/vac/lib PASS2_CXXFLAGS =-qpdf2 -O3 -qarch=ppc -qtune=rs64b PASS2_LDCXXFLAGS = 252.eon=base=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} #=============================================================================== # Floating Point Portability Flags # no optimizations allowed here #=============================================================================== 168.wupwise=default=default=default: EXTRA_FFLAGS=-qfixed 171.swim=default=default=default: EXTRA_FFLAGS=-qfixed 172.mgrid=default=default=default: EXTRA_FFLAGS=-qfixed 173.applu=default=default=default: EXTRA_FFLAGS=-qfixed 178.galgel=default=default=default: EXTRA_FFLAGS=-qfixed -qsuffix=f=f90 187.facerec=default=default=default: EXTRA_FFLAGS=-qsuffix=f=f90 189.lucas=default=default=default: EXTRA_FFLAGS=-qsuffix=f=f90 191.fma3d=default=default=default: EXTRA_FFLAGS= -qsuffix=f=f90 200.sixtrack=default=default=default: EXTRA_FFLAGS=-qfixed 301.apsi=default=default=default: EXTRA_FFLAGS=-qfixed #=============================================================================== # Integer Portability Flags # no optimizations allowed here #=============================================================================== 176.gcc=default=default=default: EXTRA_CFLAGS=-ma -qlanglvl=ansi -DHOST_WORDS_BIG_ENDIAN 186.crafty=default=default=default: EXTRA_CFLAGS=-DAIX 252.eon=default=default=default: EXTRA_CXXFLAGS=-DNEED_EXPLICIT_SPECIALIZATION 253.perlbmk=default=default=default: EXTRA_CFLAGS=-DSPEC_CPU2000_AIX 254.gap=default=default=default: EXTRA_CFLAGS=-DSYS_IS_BSD -DSYS_STRING_H -DSYS_HAS_TIME_PROTO -DSYS_HAS_MALLOC_PROTO -DSYS_HAS_CALLOC_PROTO 300.twolf=default=default=default: EXTRA_CFLAGS=-DHAVE_SIGNED_CHAR #=============================================================================== # Integer peak optimization flags #=============================================================================== 164.gzip=peak=default=default: CC=/usr/vac/bin/xlc COPTIMIZE=-O5 -qarch=ppc fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 175.vpr=peak=default=default: CC=/usr/vac/bin/xlc fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_CFLAGS=-qpdf1 -O3 -qarch=rs64b -Q=500 PASS1_LDFLAGS=-L/usr/vac/lib -lpdf -bnso -bI:/lib/syscalls.exp PASS2_CFLAGS=-qpdf2 -O3 -qarch=rs64b -Q=500 PASS2_LDFLAGS=-bnso -bI:/lib/syscalls.exp fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 176.gcc=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_CFLAGS =-qpdf1 -O3 -qarch=pwr3 PASS1_LDCFLAGS =-lhmu -lpdf -L/usr/vac/lib PASS2_CFLAGS =-qpdf2 -O3 -qarch=pwr3 PASS2_LDCFLAGS =-lhmu fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 181.mcf=peak=default=default: #CC=/usr/vac/bin/xlc COPTIMIZE=-O4 186.crafty=peak=default=default: COPTIMIZE=-O4 -qarch=rs64b fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 197.parser=peak=default=default: CC=/usr/vac/bin/xlc fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_CFLAGS=-qpdf1 -O4 -qarch=rs64b PASS1_LDFLAGS=-O4 -lpdf -L/usr/vac/lib -bnso -bI:/lib/syscalls.exp PASS2_CFLAGS=-qpdf2 -O4 -qarch=rs64b PASS2_LDFLAGS=-O4 -bnso -bI:/lib/syscalls.exp fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 252.eon=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_CXXFLAGS =-qpdf1 -O3 -qarch=ppc -qtune=pwr3 PASS1_LDCXXFLAGS =-lhmu -lpdf -L/usr/vac/lib PASS2_CXXFLAGS =-qpdf2 -O3 -qarch=ppc -qtune=pwr3 PASS2_LDCXXFLAGS =-lhmu fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 253.perlbmk=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_CFLAGS =-qpdf1 -O3 -qarch=rs64b -qdatalocal -qunroll=8 PASS1_LDCFLAGS =-lhmu -lpdf -L/usr/vac/lib PASS2_CFLAGS =-qpdf2 -O3 -qarch=rs64b -qdatalocal -qunroll=8 PASS2_LDCFLAGS =-lhmu fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 254.gap=peak=default=default: COPTIMIZE=-O4 -qarch=rs64b fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe # removed partion=large 255.vortex=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_FLAGS=-qpdf1 -O5 -Q=500 PASS1_LDFLAGS=-O5 -L/usr/vac/lib -lpdf -lhmu PASS2_FLAGS=-qpdf2 -O5 -Q=500 PASS2_LDFLAGS=-O5 -lhmu #fdo_run2 = fdpr -v -R3 -p $commandexe -x $command #fdo_post2 = cp ${baseexe}.fdpr $baseexe 256.bzip2=peak=default=default: #CC=/usr/vac/bin/xlc COPTIMIZE=-O4 -qarch=rs64b fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 300.twolf=peak=default=default: CC=/usr/vac/bin/xlc PASS1_FLAGS=-qpdf1 -O5 PASS1_LDFLAGS=-O5 -L/usr/vac/lib -lpdf PASS2_FLAGS=-qpdf2 -O5 PASS2_LDFLAGS=-O5 fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe #=============================================================================== # Floating Point peak optimization flags #=============================================================================== default=peak=default=default: EXTRA_F77FLAGS =-qfixed 168.wupwise=peak=default=default: PASS1_F77FLAGS =-qpdf1 -O4 -qipa=level=2 PASS1_LDF77FLAGS =-qipa=level=2 -lmass -lpdf -L/usr/lpp/xlf/lib/pdf PASS2_F77FLAGS =-qpdf2 -O4 -qipa=level=2 PASS2_LDF77FLAGS =-qipa=level=2 -lmass fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 171.swim=peak=default=default: PASS1_F77FLAGS =-qpdf1 -O4 -qipa=level=2 -qhot PASS1_LDF77FLAGS =-qipa=level=2 -lmass -lpdf -L/usr/lpp/xlf/lib/pdf PASS2_F77FLAGS =-qpdf2 -O4 -qipa=level=2 -qhot PASS2_LDF77FLAGS =-qipa=level=2 -lmass fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 172.mgrid=peak=default=default: F77OPTIMIZE =-O4 -qarch=pwr3 173.applu=peak=default=default: F77OPTIMIZE =-O3 177.mesa=peak=default=default: COPTIMIZE =-O3 -qarch=ppc fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 178.galgel=peak=default=default: FOPTIMIZE =-O4 -qipa=level=2 -qhot -lmass fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 179.art=peak=default=default: basepeak = 1 183.equake=peak=default=default: COPTIMIZE =-O5 -lmass -lhmu 187.facerec=peak=default=default: basepeak = 1 188.ammp=peak=default=default: COPTIMIZE =-O3 -lmass #fdo_run1 = fdpr -v -R3 -p $commandexe -x $command #fdo_post1 = cp ${baseexe}.fdpr $baseexe 189.lucas=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_FFLAGS =-qpdf1 -O3 -qarch=rs64b PASS1_LDFFLAGS =-lmass -L/usr/lpp/xlf/lib/pdf -lpdf PASS2_FFLAGS =-qpdf2 -O3 -qarch=rs64b PASS2_LDFFLAGS =-lmass fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 191.fma3d=peak=default=default: FOPTIMIZE =-O3 -lmass 200.sixtrack=peak=default=default: basepeak = 1 301.apsi=peak=default=default: basepeak = 1