SPEC® ACCEL™ OMP Result

Copyright 2015-2017 Standard Performance Evaluation Corporation

Colfax International (Test Sponsor: Indiana University)

Xeon Phi 7210

Ninja Developer Platform Pedestal: Liquid Cooled

SPECaccel_omp_base = 1.62

SPECaccel_omp_energy_base = 2.26

SPECaccel_omp_peak = Not Run

SPECaccel_omp_energy_peak = --

ACCEL license: 3440A Test date: May-2017
Test sponsor: Indiana University Hardware Availability: Aug-2016
Tested by: Indiana University Software Availability: Jan-2017
Benchmark results graph
Hardware
CPU Name: Intel Xeon Phi 7210
CPU Characteristics: Simultaneous multithreading (SMT) on, Turbo off.
CPU MHz: 1300
CPU MHz Maximum: 1300
FPU: Integrated
CPU(s) enabled: 64 cores, 1 chip, 64 cores/chip, 4 threads/core
CPU(s) orderable: 1 to 1 chip
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 1 MB I+D on chip per tile (2 cores)
L3 Cache: None
Other Cache: None
Memory: 96 GB (6 x 16 GB 2Rx8 PC4-2400T-REB-11, ECC)
+ 16 GB MCDRAM
Disk Subsystem: Intel S3510 SSD 800GB, SATA3
Other Hardware: None
Accelerator
Accel Model Name: Xeon Phi 7210
Accel Vendor: Intel
Accel Name: Xeon Phi 7210
Type of Accel: CPU
Accel Connection: N/A
Does Accel Use ECC: Yes
Accel Description: Second generation Xeon Phi self-bootable CPU,
SMT on, Turbo off, flat DDR4+MCDRAM
Accel Driver: N/A
Software
Operating System: CentOS Linux release 7.2.1511 (Core)
3.10.0-327.13.1.el7.xppsl_1.3.3.151.x86_64
Compiler: Intel Parallel Studio XE 2017 Update 1 for
Linux, Version 17.0.1.132 Build 20161005
File System: ext4
System State: Run level 3 (multi-user with networking)
Other Software: None
Power
Power Supply: 750W
Power Supply Details: Seasonic SSR-750RM Active PFC F3
Max. Power (W): 270.52
Idle Power (W): 88.13
Min. Temperature (C): 21.63
Power Analyzer
Power Analyzer: 156.56.179.146:8888
Hardware Vendor: ZES Zimmer
Model: ZES LMG450:4-Channel
Serial Number: 01001849
Input Connection: RS232 USB adapter
Metrology Institute: NIST (National Institute of Standards and
Technology)
Calibration By: ZES Zimmer
Calibration Label: 3783190001e
Calibration Date: 02.20.2017
PTDaemon Version: 1.8.1 (a497ea15; 2016-12-20)
Setup Description: connected to the single power supply that powers
the system
Current Ranges Used: 0.0A
Voltage Range Used: 130V
Temperature Meter
Temperature Meter: 156.56.179.146:8889
Hardware Vendor: Digi
Model: Watchport/H
Serial Number: W40236768
Input Connection: USB
PTDaemon Version: 1.8.1 (a497ea15; 2016-12-20)
Setup Description: positioned in front of intake fan

Base Results Table

Benchmark Seconds Ratio Energy
(kJ)
Maximum
Power
Average
Power
Energy
Ratio
Seconds Ratio Energy
(kJ)
Maximum
Power
Average
Power
Energy
Ratio
Seconds Ratio Energy
(kJ)
Maximum
Power
Average
Power
Energy
Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
503.postencil 155    0.705  35.3  231   228   1.01   154    0.706  35.3  231   229   1.01   154    0.706  35.3  231   229   1.01  
504.polbm 157    0.775  35.5  229   226   1.11   158    0.771  35.7  229   226   1.10   157    0.776  35.5  230   226   1.11  
514.pomriq 225    2.75   58.6  270   260   3.16   230    2.70   59.3  271   258   3.12   226    2.75   58.7  269   259   3.15  
550.pmd 57.2  4.21   15.1  267   263   4.89   57.0  4.23   15.1  267   264   4.90   57.1  4.22   15.1  266   264   4.90  
551.ppalm 5220    0.104  706    176   135   0.221  5224    0.104  706    178   135   0.221  5226    0.104  706    177   135   0.221 
552.pep 96.2  2.40   22.5  237   234   3.25   96.7  2.39   22.6  237   234   3.24   96.2  2.40   22.5  237   234   3.25  
553.pclvrleaf 579    1.98   130    227   225   2.65   579    1.98   130    227   225   2.65   579    1.98   130    227   225   2.65  
554.pcg 212    1.57   37.1  228   175   2.53   212    1.57   37.0  228   175   2.54   212    1.57   37.0  229   175   2.54  
555.pseismic 271    1.04   56.6  228   209   1.62   276    1.02   57.4  227   208   1.60   271    1.04   56.6  227   209   1.62  
556.psp 185    4.42   40.4  222   218   5.62   185    4.43   40.4  222   218   5.64   185    4.42   40.4  222   218   5.63  
557.pcsp 239    3.60   53.4  227   224   4.49   240    3.58   53.8  227   224   4.45   239    3.59   53.5  227   224   4.48  
559.pmniGhost 402    0.988  83.3  238   207   1.37   402    0.987  83.3  238   207   1.37   402    0.987  83.4  238   207   1.37  
560.pilbdc 344    1.90   78.7  230   229   2.49   344    1.90   78.7  230   229   2.49   348    1.88   79.2  230   228   2.47  
563.pswim 170    0.933  37.5  221   220   1.39   171    0.932  37.5  220   220   1.39   171    0.932  37.5  221   220   1.39  
570.pbt 79.0  9.87   16.8  215   213   12.4    79.1  9.86   16.8  215   213   12.4    79.0  9.88   16.8  221   213   12.4   

Platform Notes

 Sysinfo program /home/lijunj/spec/accel-test/75/Docs/sysinfo
 $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
 running on knl1.uits.indiana.edu Thu May  4 19:54:30 2017

 This section contains SUT (System Under Test) info as seen by
 some common utilities.  To remove or add to this section, see:
   http://www.spec.org/accel/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon Phi(TM) CPU 7210 @ 1.30GHz
       1 "physical id"s (chips)
       256 "processors"
    cores, siblings (Caution: counting these is hw and system dependent.  The
    following excerpts from /proc/cpuinfo might not be reliable.  Use with
    caution.)
       cpu cores : 64
       siblings  : 256
       physical 0: cores 0 1 2 3 6 7 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26
       27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
       52 53 56 57 58 59 60 61 62 63 64 65 68 69 70 71 72 73
    cache size : 1024 KB

 From /proc/meminfo
    MemTotal:       115193108 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 /usr/bin/lsb_release -d
    CentOS Linux release 7.2.1511 (Core)

 From /etc/*release* /etc/*version*
    centos-release: CentOS Linux release 7.2.1511 (Core)
    centos-release-upstream: Derived from Red Hat Enterprise Linux 7.2 (Source)
    os-release:
       NAME="CentOS Linux"
       VERSION="7 (Core)"
       ID="centos"
       ID_LIKE="rhel fedora"
       VERSION_ID="7"
       PRETTY_NAME="CentOS Linux 7 (Core)"
       ANSI_COLOR="0;31"
       CPE_NAME="cpe:/o:centos:centos:7"
    redhat-release: CentOS Linux release 7.2.1511 (Core)
    system-release: CentOS Linux release 7.2.1511 (Core)
    system-release-cpe: cpe:/o:centos:centos:7

 uname -a:
    Linux knl1.uits.indiana.edu 3.10.0-327.13.1.el7.xppsl_1.3.3.151.x86_64 #1 SMP
    Fri Jun 10 15:04:35 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

 run-level 3 May 2 10:51

 SPEC is set to: /home/lijunj/spec/accel-test/75
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sda3      ext4  713G  175G  502G  26% /

 Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'

 (End of data from sysinfo program)

General Notes

BIOS settings:
  Intel Simultaneous Multithreading (SMT): on
  Intel Turbo Boost Technology (Turbo)  : off
  Cluster Mode: quadrant
  Memory Mode: flat
  (MCDRAM is partitioned to the second NUMA node)

Current range for power measurement is 2.5A.

Base Compiler Invocation

C benchmarks:

 icc 

Fortran benchmarks:

 ifort 

Benchmarks using both Fortran and C:

 icc   ifort 

Base Portability Flags

503.postencil:  -DSPEC_USE_INNER_SIMD 
504.polbm:  -DSPEC_USE_INNER_SIMD 
514.pomriq:  -DSPEC_USE_INNER_SIMD 
550.pmd:  -DSPEC_USE_INNER_SIMD   -80 
551.ppalm:  -DSPEC_USE_INNER_SIMD 
552.pep:  -DSPEC_USE_INNER_SIMD 
553.pclvrleaf:  -DSPEC_USE_INNER_SIMD 
554.pcg:  -DSPEC_USE_INNER_SIMD 
555.pseismic:  -DSPEC_USE_INNER_SIMD 
556.psp:  -DSPEC_USE_INNER_SIMD 
557.pcsp:  -DSPEC_USE_INNER_SIMD 
559.pmniGhost:  -DSPEC_USE_INNER_SIMD   -nofor-main 
560.pilbdc:  -DSPEC_USE_INNER_SIMD 
563.pswim:  -DSPEC_USE_INNER_SIMD 
570.pbt:  -DSPEC_USE_INNER_SIMD 

Base Optimization Flags

C benchmarks:

 -O3   -qopenmp   -qopenmp-offload=host   -xMIC-AVX512 

Fortran benchmarks:

 -O3   -qopenmp   -qopenmp-offload=host   -xMIC-AVX512 

Benchmarks using both Fortran and C:

 -O3   -qopenmp   -qopenmp-offload=host   -xMIC-AVX512 

The flags files that were used to format this result can be browsed at
https://www.spec.org/accel/flags/Intel-ic17.0-linux64.html,
https://www.spec.org/accel/flags/colfax-knl.html.

You can also download the XML flags sources by saving the following links:
https://www.spec.org/accel/flags/Intel-ic17.0-linux64.xml,
https://www.spec.org/accel/flags/colfax-knl.xml.